Scorpio CVJM-K209 Manuale utente
Digital Micro-measure Camera
User Manual
Digital Micro-measure camera is a slim type handy tool.
It can easily use in different fields:
1. Skin inspection
2. Hair inspection
3. Industrial inspection: PCB, Material…
4. Education purpose
5. Print Industrial
6. Textile industrial
7. Biological inspection
8. Jewel & Stamp (Collections) inspection
9. Others
for PC solution
with friendly user interface. The special AP software:
Micro-Measure-Tool can support you to have picture,
record video and do micro-measure work with ease.
igital micro-measure camera is designe
D
1
CONTENTS
Specification.......................................................................................................2
Notes before use............................................................................................2
Outlook & Standard parts........................................................................3
Hardware system requirements..........................................................3
Driver Free Mode ........................................4
Driver Enhanced Mode .............................5
How to use Digital Micro-measure Camera................................9
How to install software............................................................................19
How to do micro-measure....................................................................22
Q & A...................................................................................................................31
.................................................
.................................................
2
Specification
Image Sensor Color CMOS Sensor
)elbaliavaeerFrevirD(PSDdeepShgiHrellortnoC
Lens Micro-Scope Lens , M12
Focus Range 0mm ~ 200mm
Snap Shot Software and Hardware
Video Capture Resolution 1600*1200,1280*1024, 800*600,640*480
352*288,320*240,176*144
Light Source In-built White Light LED x8 PCS
Still Image Capture Resolution 5M, 3M , 2M , 1.3M , VGA
Frame Rate 30 f/s Under 600 LUX Brightness ( 1.3M )
Digital Zoom 4X Sequence Mode
Brightness Control Manual adjustment ,
Auto W/B by software
Magnification Ratio 5 X ~500X ( Manual )
Power Supply USB Port (5V DC )
0.2BSUecafretnI
Operation System Win XP , Vista , Win 7 32 bit and 64 bit.
Driver Language English, Chinese, German, Italy, French, Spain,
Portugal, Japan
Measure Tool Micro-Measure(It can measure Length and diameters,
angle, the perimeter, area, etc)
(Language: English, Chinese Simplified)
System Requirement Pentium Computer with 1G Hz & Above ,
1G HD Space CD ROM Driver,
512MB RAM , Direct X VGA Card
CD disk Driver and Micro-Measure Tool
dnatsxifelbaliavaelgnaweivllAdnatSxiF
Dimension 115 mm ( L ) X 33 mm ( R )
3
Notes before use
1. Don’t touch lens & LED light area.
2. Don’t de-assembly the digital Micro-measure camera , it cause damage.
3. Don’t use it under high humidity environment.
4. Depart the USB port when un-use.
5. Clean out case with dry cloth.
6. Keep away from oil and floating materials, it causes lens contamination.
7. Avoid outdoor use if possible.
8. Storage: Temperature :O°C ~ 40°C,Humidity:45% ~ 85%.
9. When this product get wet: leave PC connection immediatel . And
do not de-assembl or dr b hair dr er. Send to repair center.
Outlook & Standard parts
1. Digital Micro-measure Camera
2. USB 2.0 cable
3. Flexible Stand
4. CD ROM
5. User Guide
Hardware system requirements
Windows XP、VISTA、WIN 7
Pentium 1G, Celeron, AMD 1G & above
512MB Memory
1G Hard Disc memory space
16-bit & above VGA Card
CD-ROM
USB2.0 interface
4
Driver Free Mode
NOTE :If your OS is VISTA or WIN 7 standard version, it is important
for you to make sure the pre-view program “CamApp “ is ready before
run “ Driver Free” function. We prepare it also inside our CD ROM , You
can install the driver and get it ready before use.
1. Plug-in the USB port of Digital Micro-measure Camera into Computer USB
port, Find USB Video Device in “ My Computer “.
2. Take pictures
5
Driver Enhanced Mode
1. Plug-in USB port of Digital Micro-measure camera into Computer USB port
2. Insert CD ROM, system will auto come out the interface as bellowing,
Click”Driver” to start installation
6
NOTE：
：：
：If auto run takes times or unable : Please open the file of
CD ROM & run“Autorun.exe”
3. Follow the indicators and select “OK”
7
Select “install” to complete this process.
4.Select “next” to complete this process.
8
Following the user guide by steps, and completed by click “Finish“. Computer
will restart and get ready .
Click ”Continue Anyway”
9
How to use Digital Micro-measure Camera
1.Plug-in USB port of Digital Micro-measure camera into Computer USB port，
Direct Click icon on desk top of computer to start this device.
2. Click ”File”—> “Set capture file”, the saved file name could be assign.
Indice
