Screen Research MC2 Manuale utente

Installation Manual

Motorized Classic 2 Drop Down Screens

On-Ceiling / On-Wall Mounting

Tools & Storage

Model Mounting Options

Ceiling Mounting

Wall Mounting

Screen Casing Mounting

Screen Transit Locking System Removal

Motor Connection

End Travel Verification (Default set at factory)

MCS Installation

MCS Configuration - Testing

End Cap Fitting

Tab-tensioning Bar Adjustment

Manual adjustment of motor end-stops

IR Eye Recommended Localization

Motor Connection

Warranty

Legal Information

Table of Contents

Please read this manual before starting work.

Note :

MC2

Wall Mount

min 13 mm

(1/2")

min 13 mm

(1/2")

Ceiling Mount

Projection Surface

Recommendations

Leave sufficient room to allow access to the end of the screen casing

Recommendations on minimum clearance for wall or ceiling mounting

Recommended

254 mm (10”)

Recommended

254 mm (10”)

Tools & Storage

Model Mounting Options

Do not store standing

MC2

Essential Tools Provided

Tip

-1-

MC2 Install Manual: Rev A 01 Aug 2009

MC2 (80-110")

This model has two mounting options :

Ceiling Mounting Wall Mounting

Use fixings appropriate to your

installation construction

Wall Mounting

Ceiling Mounting

Ensure the head of your chosen fixing system

fits within the indicated zone.

15 mm (9/16”) max

6.5 mm

(1/4”) max 6.5 mm

(1/4”) max

Ensure the

head of your

chosen fixing

system fits

within the

indicated zone.

-2-

4 x Ø8 mm (5/16”)

6.5 mm (1/4”) max

15 mm (9/16”) max

4 x Ø 8 mm

(5/16”)

MS2 4 x Ø8 (5/16”) 2

Model Bracket Holes

per Bracket

Mounting

Brackets

Included

Use fixings appropriate to your

installation construction

110 mm

11/32

”)

MC2 Install Manual: Rev A 01 Aug 2009

140 mm (5 1/2”)

140 mm (5

1/2

”)

110 mm

(4 11/32”)

Screen Casing Mounting

MC2 Install Manual: Rev A 01 Aug 2009

Ceiling Mounting

IMPORTANT: BRACKET SECURING SCREWS MUST BE USED.

NOT DOING SO RISKS CASING FALLING !

Wall Mounting

-3-

MIN: 110 mm (4

MAX: 155 mm (6

-4-

Screen Transit Locking System Removal

Motor Connection

MC2 Install Manual: Rev A 01 Aug 2009

Only carry out this

step once all transit

security fixings have

been removed

DOWN

STOP

Unscrew

remove

Unscrew

remove

Repeat at each end of the screen

Connect the plug

-5-

MCS Installation

End Travel Verification (Default set at factory)

Refer to the MCS hardware guide in

order to connect your control devices

correctly.

Refer to the MCS software guide

should you wish to reprogram the

motor control system.

MCS-320 MCS-310

MCS-BRR

Receivers

Interfaces Motors

MCS-BIE

(Radio Frequency) (Infrared)

MCS-RR0

MCS-IR0

MCS-RR1

MCS-IR1

MCS-BRSMCS-SIP

Remotes

MCS (Motor Control Systems) Manual

MCS Configuration - Testing

MCS (Motor Control Systems) Manual

Carefully deploy the screen to its maximum extent.

Verify that it stops automatically at the desired end of travel.

If this is not the case stop screen travel by

pressing stop button and proceed to step

Carefully stow the screen to its stored position.

Verify that it stops automatically at the desired end of travel.

If this is not the case stop screen travel by

pressing stop button and proceed to step

click

11 11

Do not pass the white line

drawn in the black drop zone.

After this point, deployment

of the fabric risks damage to

the product.

Important : As part of the installation procedure it is important that the motor end stops are

verified in order to prevent damage to the screen.

The end stop limits are set at the factory, but may have been released during shipping.

Failure to perform this procedure will void any subsequent claims made under the product

warranty. Please contact Screen Research if you have any questions.

MC2 Install Manual: Rev A 01 Aug 2009

click

-6-

End Cap Fitting

Tab-tensioning Bar Adjustment

Deploy the screen to its standard operating position before adjusting the tab-tensioningsystem.

Insert & push

Adjust

click click

click

MC2 Install Manual: Rev A 01 Aug 2009

Screwing

Repeat at each end of the screen

-7-

Manual Adjustment of Motor End-stops

MC2 Install Manual: Rev A 01 Aug 2009

MAX

LIMIT !

click click

1 -

Push the two buttons in order to free the screen stopping positions.

2 -

Carefully deploy the screen to the desired position.

Lock this position by releasing the correct button as shown in the table below.

3 -

Carefully define the desired closed position.

Lock this position by releasing the correct button as shown in the table below.

click

Pushed buttons = unlocked screen

No more stop position memorized

Released buttons = locked screen

Stop positions are memorized

Please, follow this step ONLY if the end of travel of the motors has moved during transit. If your screen

automatically stops at the desired full extension and full winding up, you do NOT need this step.

click

yellowMC2 white

Screen

Model Screen

Lock UP Screen

Lock DOWN

Refer to this table if the motor of your screen is mounted on the LEFT

click

Indice

Altri manuali Screen Research Schermo di proiezione

Screen Research

Screen Research XLR3 Manuale utente

Screen Research

Screen Research MMS2-L1 Manuale utente

Screen Research

Screen Research MS2-IS Manuale utente

Screen Research

Screen Research Reference X-Mask XTR3 Manuale utente

Screen Research

Screen Research MS3-IS Manuale utente

Screen Research

Screen Research SLMF Manuale utente

Screen Research

Screen Research EL1C Manuale utente

Screen Research

Screen Research TheaterCurved Reference X-Mask T-XLR3 Manuale utente

Screen Research

Screen Research Reference X-Mask X4R3 Manuale utente

Screen Research

Screen Research MMS2-L1 Manuale utente

Screen Research

Screen Research X4R Manuale utente

Screen Research

Screen Research ClearPix Manuale utente

Screen Research

Screen Research MS2 Manuale utente

Screen Research

Screen Research SolidPix Manuale utente

Screen Research

Screen Research TheaterCurved Reference X-Mask T-X4R Manuale utente

Screen Research

Screen Research CLIC Manuale utente

Screen Research

Screen Research MMS2-L1-IS Manuale utente

Screen Research

Screen Research MS2-IT Manuale utente

Screen Research

Screen Research FS3 Manuale utente

Manuali Schermo di proiezione popolari di altre marche

FART PRODUKT

FART PRODUKT Standard SCREEN Manuale utente

Draper

Draper E Series Manuale

Elite Screens

Elite Screens Elite Tripod Series Manuale utente

Laarhoven

Laarhoven Companion II Manuale utente

Renogy

Renogy RMS-LFPS-US Manuale utente

Da-Lite

Da-Lite ExecutiveElectrol Manuale utente

Samsung

Samsung S*H65* Manuale utente

FONESTAR

FONESTAR PPTR-43100-FA Manuale utente

Slide Clear

Slide Clear Varro XL Manuale utente

Elite Screens

Elite Screens M85XWS1-SRM Manuale utente

OS РХ-090Н Manuale utente

Niko

Niko 10-845 Manuale utente

Speaka Professional

Speaka Professional 2357532 Manuale operativo

Sima

Sima XL-72 Manuale utente

Jasic

Jasic EVO 2.0 ET-200P Manuale utente

Elite Screens

Elite Screens Starling 2 Series Manuale utente

InFocus

InFocus SC-WALL GRY-92H Manuale

Barco

Barco OverView MVL-615 Manuale utente