SCS U519 Manuale utente

INSTASCAN©SCANNER
MODEL U519
Operations Manual
SCS Corporation
10905 Technology Place, San Diego, CA 92127
Phone: 858-485-9196 • Fax: 858-485-0561
U519 Manual cover.p65 10/27/2000, 4:36 PM1

The products and programs described in this Operations Manual are
licensed products of SCS. This Operations Manual contains proprietary
information protected by copyright and this Operations Manual and all
accompanying hardware, software, and documentation are copyrighted.
SCS does not warrant that the hardware will work properly in all
environments and applications, and makes no warranty and representation,
either implied or expressed, with respect to the quality, performance, or
fitness for a particular purpose.
Information in this Operations Manual is subject to change without notice
and does not represent a commitment on the part of SCS. SCS assumes
no responsibility for incidental damage that may result do to any
inaccuracies that may be contained in this Operations Manual.
SCS makes no commitment to update or keep current the information in
this Operations Manual, and reserves the right to make changes to this
Operations Manual and/or product without notice.
No part of this manual may be reproduced or transmitted in any form or
by any means, electronic or mechanical, including photocopying, recording,
or information storage and retrieval systems, for any purpose other than
the purchaser’s personal use, without the express written permission of
SCS.
IBM is a registered trademark of International Business Machines Corporation.
MS-DOS and Windows are registered trademarks of Microsoft Corporation.
All other trademarks or registered trademarks listed belong to their respective owners.
InstaScan and Dura-label are trademarks of SCS Corporation.
Version 100612-1 Rev. A
©Copyright 2000 SCS 10905 Technology Place San Diego, CA 92127
ii
U519 Manual cover.p65 10/27/2000, 4:36 PM2

iii
Contents
Chapter 1— Introduction .............................................. 1
Advantages .................................................................. 2
U519 InstaScan Scanner ............................................... 4
What Else You Need ..................................................... 5
Summary of Chapters .................................................... 6
Chapter 2 — Installation .............................................. 7
LEDs and Connectors .................................................... 7
Front Panel .................................................................. 8
Rear Panel ................................................................. 10
InstaScan Scanner Installation Steps .............................. 11
Connecting External Antennas ...................................... 12
Placing the Antennas ................................................... 12
Connecting to a PC Serial Port or RS-232 ...................... 13
Connecting to an AC Outlet ......................................... 14
Configuring the Scanner .............................................. 15
Aligning the Scanner ................................................... 18
Installing Dura-labels .................................................. 19
Reading Information from your Dura-labels .................... 20
Writing information to your Dura-label........................... 21
Loading Your Application ............................................. 22
Chapter 3 — RF Communications ................................. 23
Signal Interference ...................................................... 24
Signal Attenuation/Reflections ...................................... 25
Optimizing Performance .............................................. 26
U519 Manual cover.p65 10/27/2000, 4:36 PM3

iv
Chapter 4 — Troubleshooting ...................................... 27
Solving Problems ........................................................ 27
Contacting Customer Service ....................................... 30
Returning Your System ................................................. 31
Chapter 5 — Specifications ......................................... 32
SCS Patents................................................................ 32
InstaScan Scanner Specifications .................................. 33
Chapter 6 — DB-25 Connector Function ......................... 35
Receive Antenna Select Lines ........................................ 36
Transmit Antenna Select Lines ....................................... 37
Peripheral Inputs ......................................................... 37
Peripheral Outputs ...................................................... 38
Limited Warranty ......................................................... 41
FCC Part 90 Compliance ............................................ 41
Radio Frequency exposure limits ................................... 42
Disclaimer ................................................................. 42
U519 Manual cover.p65 10/27/2000, 4:36 PM4

1
Chapter 1
Introduction
The U519 InstaScan scanner and the Dura-label Radio Frequency
(RF) tag developed by SCS are state-of-the-art data gathering
and inspection systems that combine sophisticated Interactive
Identification technology in a compact form factor. This unique synergy
allows our system to integrate seamlessly into —and significantly increase
productivity for —a wide range of applications and environments.
This system consists of the following components:
A scanner that is capable of writing information to and reading
information from Dura-labels using a read/write head (antenna).
The scanner conforms to FCC Part 15 specifications and can operate
with one to nine externally connected antennas.
Dura-label RF tags that contain information programmed by the
scanner. These tags are designed to store information under extremely
harsh environments without requiring a battery, and the read/write
Dura-labels can store a permanent record of multiple events and
transactions.
Communications between the scanner and the tags are conducted using
a revolutionary two-way technology that provides superior advantages
over conventional communication methods. The specific data being
communicated, and the amount of interaction you have with the scanner
and tag, are determined by your application.
U519 Manual.p65 10/27/2000, 4:35 PM1

2
Advantages
Data-gathering systems such as bar code readers use one-way
communication: a sensor reads information from a device, without any
interaction between the two devices.
Moreover, bar code systems are subject to line-of-sight limitations. As a
result, airborne contaminants such as dust, dirt, oil, and mist, as well as
label damage and objects residing outside the line of sight, result in
inefficient and erroneous results.
The SCS Interactive Identification System overcomes these
restrictions by using state-of-the-art technology. This technology
allows the scanner and tag to conduct ongoing two-way
communications that are not restricted by line-of-sight
constraints.
Figure 1.Interactive Identification Technology
U519 Manual.p65 10/27/2000, 4:35 PM2

3
This unique capability allows:
• Collective or selective data to be read from a single tag.
• Collective or selective data to be read from multiple tags without
requiring sorting or unpacking.
• Classes of tags to be filtered according to user-defined criteria.
This technology employs a superior interrogation feature that enables
applications to uniquely identify all tags in the scan field, without
misidentification or identifying the same tag multiple times.
It also uses a robust protocol that maintains a uniform per-tag scan time,
regardless of the number of tags in the scan field. The protocol provides
a flexible software application interface that can be customized to the
specific needs of particular industries and markets.
These unparalleled capabilities make our system an ideal solution for
logistics and warehousing, automatic sortation, pallet tracking, and anti-
diversion/anti-counterfeiting applications.
U519 Manual.p65 10/27/2000, 4:35 PM3

4
U519 InstaScan Scanner
The U519 scanner is designed for applications or configurations that
require the scanner to be a considerable distance from the tags, or where
numerous tags are required to be read simultaneously.
The scanner provides nine coaxial connectors for supporting up to nine
external antennas. Each antenna plugs into its own connector on the
rear panel of the scanner.
Figure 2.
U519 InstaScan Scanner
U519 Manual.p65 10/27/2000, 4:35 PM4

5
What Else You Need
To complete your system, you need an IBM or compatible personal
computer with the following minimum system requirements:
•486 processor or better
•Compatible screen and keyboard
•9-pin RS-232 port
•Windows 95 or 98
• 16 MB of RAM (32+ MB recommended)
The applications you use to interface with this system may have additional
hardware and software requirements. For more information, consult the
manual that came with your applications.
U519 Manual.p65 10/27/2000, 4:35 PM5

6
Summary of Chapters
Besides Chapter 1, this Operations Manual contains the following
additional chapters:
• Chapter 2, Installation – describes how to install the scanner
and tag(s)
• Chapter 3, RF Communication - provides information on radio
frequency (RF) communications
• Chapter 4, Troubleshooting – describes how to identify, resolve,
and avoid problems when using the scanner and tag. This
chapter also contains Customer Service information and
merchandise return instructions
• Chapter 5, Specifications – lists scanner specifications
• Chapter 6, DB-25 Connector Function — describes the 25-pin
connector of the U519 scanner.
U519 Manual.p65 10/27/2000, 4:35 PM6
Indice
Altri manuali SCS Scanner



















