SEACHOICE 52111 Manuale utente

2,000 LBS. (907 KG.)

ELECTRIC

TRAILER WINCH

INSTALLATION & OPERATION MANUAL

Model 52111

MODEL 52111 • 2,000 LB. ELECTRIC TRAILER WINCH

TECHNICAL SPECIFICATIONS:

Capacity: 6,000 lbs. rolling; 5,000 lbs. marine; 2,000 lbs. pulling capacity

Max. boat size: 18'

Max. boat weight: 5,000 lbs.

Line speed: 6'/min. without load

Cable length ø 3/16" X 30' (ø 4.8 mm X 9.2 m)

Hook size: ¼"

Power supply: 12V (DC)

Power cord: 16.4' (5 m)

Remote switch wire length 9.8' (3 m)

Mounting plate 8.97" x 4.46" x 1.25" (227 x 113 x 31.7mm)

Overall dimensions: 9.68" x 10" x 7.74" (245 x 256 x 196mm)

WINCH ASSEMBLY DIAGRAM

26 27 28

INSTALLATION & OPERATION MANUAL

PARTS LIST

Item No. Description Qty. Item No. Description Qty.

1 Hexagon thin nut (galvanized) M12 5 25 Winch Frame 1

2 Internal tooth lock washer 1 26 Screw M5X12 9

3 Bearing 2 27 Spring washer 11

4 Drum shaft gasket 4 28 Flat washer 7

5 Tension disc 1 29 Motor 12V DC 1

6 Drum shaft 1 30 One-way blade 1

7 Cable protector panel 1 31 Brake disk pad 1

8 Flat gasket 2 32 Nylon ribbon 1

9 Transmission gear 1 33 Right shell 1

10 Spring washer 2 34 Hand crank 1

11 Hexagon nut M12 1 35 Left shell 1

12 Small gear 1 36 Cross recessed tapping one screw

4x20

13 Stamped bearing 2 37 Screw M4X 35 1

14 Long shaft 1 38 Hex nut M3 1

15 Snap ring for shaft 1 39 24A Over-current protector 1

16 Clutch spring 1 40 Screw M3x12 1

17 Transmission gear 1 41 40A solenoid 2

18 Clutch knob 1 42 Screw M5X6 2

19 Snap ring for shaft 1 43 SCREW M5X16 1

20 Cotter pin 1 44 Flexible friction plate (right) 1

21 Flat washer 1 45 Flexible friction plate(left) 1

22 Dual gear 1 46 Hex nut M5 2

23 Dual gear shaft 1 47 Hand crank 1

24 Lock gasket 1 48 Handheld control 1

INCLUDED ACCESSORIES

Item No. Description Qty.

49 Mounting plate 1

50 Power wire 1

SAVE THIS MANUAL

You will need this manual for the safety warnings and cautions, assembly instructions, operating procedures,

maintenance procedures, troubleshooting, parts list, and diagram. Keep this manual in a safe, dry place for

future reference.

MODEL 52111 • 2,000 LB. ELECTRIC TRAILER WINCH

NOTICE

The warnings, cautions, and instructions discussed in this owner’s manual cannot cover all possible conditions

and situations that may occur. It must be understood by the operator that common sense and caution are

factors which cannot be built into this product, but must be supplied by the operator.

SAFETY WARNING & CAUTIONS

WARNING: When using powered equipment, basic safety precautions should always be followed to reduce

the risk of personal injury and equipment damage.

READ ALL INSTRUCTIONS BEFORE USING THIS PRODUCT.

SAFETY PRECAUTIONS

WARNING: Observe safety precautions for personal safety and the safety of others. Improper equipment

operation may cause personal injury and equipment damage.

Read the following carefully before attempting to operate your winch and keep the instructions for future

reference.

WARNING: Moving parts entanglement hazard.

• Failure to observe these instructions could lead to severe injury or death.

• To avoid injury to hands or ﬁngers, always keep hands clear of cable, hook loop, hook and fairlead opening

during installation, operation and when spooling in or out.

• Always use extreme caution when handling hook and cable during spooling operations.

• Always use supplied hook strap whenever spooling cable in or out, during installation or operation to avoid

injury to hands or ﬁngers.

• Always wear heavy leather gloves when handling a cable.

• Never let cable slip through your hands.

• Always be aware of possible hot surface at winch motor, drum or cable during or after winch use.

WARNING: Chemical and ﬁre hazard

• Failure to observe these instructions could lead to severe injury or death.

• Always remove jewelry and wear eye protection.

• Never lean over battery while making connections.

• When drilling, always verify that the area is a safe distance from the fuel line, fuel tank, brake lines,

electrical wires, etc.

• Never route electrical cables across sharp edges, through or near moving parts or parts that become hot.

• Always insulate and protect all exposed wiring and electrical terminals.

• Always install terminal boots as directed in installation instructions.

WARNING: Falling or crushing hazard

• Failure to observe these instructions could lead to severe injury or death.

• Never use as an overhead hoist, or to suspend a load.

• Never use to lift or move persons.

INSTALLATION & OPERATION MANUAL

GENERAL SAFETY

Know your winch: Take time to fully read and understand this manual.

• Never operate this winch if you are under 16 years of age.

• Never operate this winch when under the inﬂuence of drugs, alcohol or medication.

• Never exceed winch or cable rated capacity. Double line using a snatch block to reduce winch load.

INSTALLATION SAFETY

• Always choose a mounting location that is sufﬁciently strong to withstand the maximum pulling capacity of

your winch.

• Always use factory-approved switches, remote controls, accessories and installation components.

• Always use Grade 5 or better hardware, never weld bolts and never use longer bolts than those supplied

by the manufacturer.

• Winch mounting and installation of hook to hook loop is necessary before wiring is complete.

• Always position fairlead with WARNING label on top.

• Always spool the cable onto the drum as indicated by the drum rotation label on the winch. This is required

for automatic brake to work (if winch is so equipped) and for correct installation orientation.

• Always pre-stretch cable and re-spool under load before use. This will reduce the risk of the cable binding

and becoming damaged.

WINCH SAFETY

• Failure to observe these instructions could lead to minor or moderate injury.

• Always inspect winch installation and cable condition before operating winch. Frayed, kinked or damaged

cable must be replaced immediately. Loose installation must be corrected immediately.

• Never leave remote control plugged into winch while free spooling, rigging or idling.

• Never hook cable back onto itself. This will damage the cable. Always use a choker chain, wire choker

rope, or tree trunk protector on the anchor.

• Prior to winching, always remove any element that may interfere with the safe operation of the winch.

• Always take your time when rigging for a winch pull.

• Always be certain the anchor you select will withstand the load, and the strap or chain will not slip.

• Never engage or disengage the clutch if the winch is under load, cable is in tension or cable drum is moving.

• Always unspool as much cable as possible when rigging. Double line or pick a distant anchor point.

• Never winch with less than ﬁve wraps of cable around the drum. This could cause the cable to come loose

from the drum.

• Always stand clear of cable and load during operation.

• Never touch cable or hook while in tension or under load.

• Never touch the cable or hook while someone is at the remote switch or during winching operation.

• Never touch cable or hook while remote control is plugged into the winch.

• Always stand clear of cable and load and keep others away while winching.

• Always require operator and bystanders to be aware of stability during winching of vehicle and/or load.

• Always keep the remote control lead clear of the drum, cable and rigging. Inspect for cracks, pinches,

frayed wires or loose connections and replace if damaged.

• When using the remote control from inside a vehicle, always pass it through a window to avoid pinching

the lead in a door.

• Always avoid continuous side pulls which can pile up cable at one end of the drum. This can damage your

cable or winch.

• Always ensure the clutch is fully engaged or disengaged.

• Never use winch to tow other vehicles. Shock loads could momentarily exceed capacity of cable and winch.

• Always use care to not damage your frame when anchoring your vehicle during a winching operation.

• Never “jog” cable under load. Shock loads could momentarily exceed capacity of cable and winch.

MODEL 52111 • 2,000 LB. ELECTRIC TRAILER WINCH

• Never use winch to secure a load during transportation.

• Never submerge winch in water.

• Always store the remote control in a protected, clean and dry area.

OPERATION INSTRUCTIONS

1. KEEP WORK AREA CLEAN. Cluttered areas invite injuries.

2. OBSERVE WORK AREA CONDITIONS. Do not use winches in damp, wet ,or poorly lit locations. Do not

expose accessory tools to rain. Keep work area well lit. Do not use electrically powered equipment in the

presence of ﬂammable gases or liquids.

3. KEEP CHILDREN AWAY. Children must never be allowed in the work area. Do not let them handle

machines, tools, or equipment.

4. STORE IDLE ACCESSORY EQUIPMENT. When not in use, accessory tools must be locked up in a dry

location to inhibit rust. Always lock up tools and keep out of reach of children.

5. DO NOT FORCETHE TOOL OVER LOADED. It will do the job better and more safely, steadily at the rate

for which it was intended. Do not use inappropriate attachments in an attempt to exceed the tool’s

capacities.

6. USE THE RIGHT ACCESSORY TOOL FOR THE JOB. Do not use the tools which are not suitable for

winches.

7. DRESS PROPERLY. Do not wear loose clothing or shaky jewelry, as they can be caught in moving parts.

Non-skid footwear is recommended. Wear restrictive hair covering to contain long hair. Always wear

appropriate work clothing.

8. USE EYE, EAR AND BREATHING PROTECTION. Always wear ANSI-approved impact safety goggles if

you are producing metal ﬁlings or wood chips. Wear an ANSI-approved dust mask or respirator when

working around metal, wood, and chemical dusts and mists. Use ANSI-approved ear protection when

working in a loud or noisy environment.

9. DO NOT ABUSE THE POWER CORD. Assure the power cord from damage, either from impacts, pulling

or corrosive materials. Do not yank battery’s cord to disconnect it from the battery. Do not use other

inappropriate accessories to exceed the rated line pull of winches.

10. DO NOT STAND TOO CLOSE. Do not reach over or across running machinery. Keep proper footing and

balance at all times.

11. MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for better and safer performance. Follow

instructions for lubricating and changing accessories. Inspect power cord periodically and, if damaged,

have it repaired by a professional technician. Inspect all moving parts and mounting bolts prior to use.

Control handle and power switch must be kept clean, dry, and free from oil, grease, chemicals and

corrosive materials at all times.

12. REMOVE ADJUSTING TOOLS AND WRENCHES. Be sure that not used tools adjusting wrenches are

removed from the machine surface before operation.

13. AVOID UNINTENTIONAL STARTING. Be sure that you are absolutely prepared to begin working before

turning the start switch on.

14. STAY ALERT. Watch what you are doing. Do not operate this machine when you are tired.

15. DO NOT OPERATE THE WINCH WHILE UNDER THE INFLUENCE OF ALCOHOL, DRUGS OR PRESCRIPTION

MEDICINES.

16. CHECK FOR DAMAGED PARTS. Before using the winch, carefully check all parts to ensure normal,

safe operation. Check for effectiveness of all parts, any broken parts, mounting ﬁxtures and any other

condition that may affect proper operation. Any part that is damaged should be properly repaired or

replaced by a qualiﬁed technician. Do not use the winch if any switch can not be turned on and off

properly.

17. REPLACEMENT PARTS AND ACCESSORIES. When replacing, do not use different replacement

parts from different winch models and speciﬁcations. This will void the warranty. Only use parts and

accessories intended for use with this winch, which are available from Seachoice dealers. Visit https://

www.seachoice.com/store-locator to ﬁnd a dealer near you.

INSTALLATION & OPERATION MANUAL

MOUNTING YOUR WINCH

WARNING

• Always connect red wire to the positive pole of battery, connect black wire to the negative pole.

• Do not use your winch continuously or you will drain the battery.

• Keep your engine running while using this winch, to continually recharge the engine. However, exercise

extreme caution when working around a running vehicle.

• Do not use a dirty, corroded or leaking battery .You may suffer injury from acid burns.

• Always wear ANSI approved safety glasses when working around or with a battery.

NOTE: Your winch is designed to be mounted temporarily using the Trailer Hitch Mounting Bracket. However,

you may also mount your winch permanently.

PERMANENT MOUNTING:

1. Select a mounting site on the bumper of your vehicle, truck bed, boat trailer, or other suitable location.

NOTE: This winch can generate 2,000 lbs. of pulling force. Be sure the location you select can withstand

this much force. You may need to use steel reinforcement plates, or weld on additional bracing,

depending on the desired mounting location.

2. Align the winch with the desired location, and mark for drilling the locations of the two holes on the base

of the winch.

3. Drill the hole locations on your vehicle.

4. Using hardened steel bolts at least M8 in diameter, install your winch to the location.

TEMPORARY MOUNTING:

1. Attach the Adapter Plate, as shown:

2. Index the heads of the plate studs into the keyhole slots on the back of the winch.

3. Attach the Winch/Adapter Plate assembly to your trailer hitch by inserting the trailer hitch ball through

the shaped hole in the Adapter Plate.

USING YOUR WINCH

1. Put your vehicle in neutral. WARNING: Never winch with your vehicle in gear or in park, as this could

damage your vehicle’s transmission.

2. Engage the emergency brake.

3. Use suitable chocks to prevent the wheels from rolling.

4. To pull out the cable, turn the clutch knob (#15) clockwise to “UNLOAD”, then pull out the cable you

need. Always leave at least ﬁve turns of cable on the spool to prevent pulling the cable out of the winch.

5. Hook onto the object using a pulling point, tow strap or chain. Never wrap the cable around the object and

hook onto the cable itself. This can cause damage to the object being pulled, and kink or fray the cable.

6. Turn the clutch knob counterclockwise to “LOAD”.

7. When it is safe to do so, use the power switch in the remote control to retract the cable and winch the

item as desired.

MODEL 52111 • 2,000 LB. ELECTRIC TRAILER WINCH

PULLING CAPACITY

1. This winch has a capacity of 2,000 lbs.

Applying this measurement to practical

applications, you can use this winch to move

the following.

a. Move a load up to 2,000 lbs. from a

dead stop on level ground.

b. Move a water Bourne craft of up to

5,000 lbs.

c. Maintain movement of a wheeled

vehicle of up to 6,000 lbs.

2. Pulling capacity is reduced as incline

increases. For example, rolling capacity is

reduced from 6,000 lbs. on ﬂat ground to

1,100 lbs. on a 45-degree incline. Please

refer to the graph on the right for estimated

pulling capacity (rolling weight) on various

inclines.

USING THE EMERGENCY HAND CRANK

WARNING: Do not use the emergency hand crank to assist an operating winch. This will damage the

winch and may cause personal injury.

Use the emergency hand crank only in the event of a dead battery and when the cable is still loaded to help loosen

and retract the cable temporarily. Never use the emergency hand crank to load the cable.

1. Turn the clutch knob clockwise to “LOAD” until hand tight. Place the emergency hand crank on the long

shaft.

2. Place the end of the emergency hand crank outside.

3. Rotate the emergency hand crank counterclockwise to tighten the cable. Turn it clockwise to loosen it

until there is no load.

MAINTENANCE

1. Lubricate the cable occasionally with a light oil.

2. Grease the gears every 6 months. To do this, remove the clutch knob and separate the left and right

housing. Use any good quality waterproof grease.

6,000

5,000

4,000

3,000

2,000

1,000

Weight (Lbs.)

Decree of Incline

10 20 30 40 45

Indice

Manuali Verricello popolari di altre marche

WARRIOR

WARRIOR Trojan 40PUS12 Guida di riferimento rapido

SVERO

SVERO 16 Manuale utente

Warrior Winches

Warrior Winches C10000NH Manuale utente

Badland Winches

Badland Winches 68146 Manuale utente

Bush

Bush II Series Manuale utente

Badland

Badland APEX 5500 Manuale utente

Quadratec

Quadratec Q9000 Synthetic Manuale

C-Max

C-Max VIGO Manuale utente

Comeup

Comeup DV-9 Manuale utente

Orvea

Orvea Italwinch 805 Manuale utente

Prowinch

Prowinch PWJTHF300 Manuale utente

Clas Ohlson

Clas Ohlson LD2000-A Manuale utente

Topex

Topex 97X080 Manuale utente

Eastbound

Eastbound MotoWinch 1707001 Manuale utente

Runva

Runva EWD8000 Guida di riferimento rapido

Ingersoll-Rand

Ingersoll-Rand LIFTSTAR FG 1500/CN Series Guida all'installazione

Granit

Granit 11157675 Manuale utente

TREX

TREX TB75 Manuale utente