Seagate HAWK 4 Famil Manuale utente

HAWK 4 Family:

. . . . . . . . . . . . . . . . . . . . . . .

(Wide Bus)

ST15230W/WD/WC

. . . . . . . . . . . . . . . . . . . . . . .

ST15230DC

. . . . . . . . . . . . . . . . . . . . . . .

Installation Guide

Contents

Introduction........................................................... 1

Electromagneticinterference ................................ 1

Before you begin .................................................. 3

Installation overview....................................... 8

Product repair information .................................... 10

Shipping ......................................................... 11

Product repair and return information............. 11

Technical support services............................. 12

Drive specifications............................................... 15

Initial set-up information........................................ 18

Drive configuration................................................ 23

Drive installation ................................................... 33

Publication Number: 77767477, Rev. A

October 1994

Seagate®,SeagateTechnology®andtheSeagatelogo

areregisteredtrademarksofSeagateTechnology,Inc.

HawkTM, SeaFAXTM, SeaFoneTM, SeaTDDTM and

SeaBOARDTM aretrademarksofSeagateTechnology,

Inc.Otherproductnamesareregisteredtrademarksor

trademarks of their own.

Seagate reserves the right to change, without notice,

product offerings of specifications. No part of this

publication may be reproduced in any form without

written permission from Seagate Technology, Inc.

Hawk 4 (Wide) Family Install Guide, Rev. A 1

___________________________________________

Introduction

Beforeattemptinganyinstallation,pleasereadthrough

all applicable sections of this document, including all

warnings and cautions.

Warning. This equipment generates, uses and can

radiate radio frequency energy and if not

installedin accordance with these instruc-

tions,maycauseinterferencetoradiocom-

munications.

Electromagnetic interference (EMI) con-

siderations

The drive(s) described herein, as delivered, are de-

signed for system integration and installation into a

suitable enclosure prior to use. As such, the drive(s)

described herein are supplied as a sub-assembly and

arenotsubjecttoSubpartJofPart15oftheFCCRules

and Regulations nor the Radio Interference Regula-

tionsoftheCanadianDepartmentofCommunications.

However,theunithasbeentestedusingpropershield-

ing and grounding and found to be compliant with the

ClassAlimitsoftheFCCRulesandtheRegulations of

the Canadian Department of Communications.

2 Hawk 4 (Wide) Family Install Guide, Rev. A

___________________________________________

The physical design characteristics of the drive(s)

described herein, serve to minimize EMI radiation

when installed in an enclosure that provides reason-

able shielding. As such, the drive(s) are capable of

meeting the Class B limits of the FCC Rules and the

RegulationsoftheCanadianDepartmentofCommuni-

cations.

Note. It is the end users' responsibility to assure that

the drive(s) described herein meet the appro-

priateEMIrequirementsoftheirsystem.Shielded

I/Ocablesmayberequirediftheenclosuredoes

notprovideadequateshielding. IfI/Ocables are

externaltotheenclosure,shieldedcablesshould

beused, with theshieldsgrounded to theenclo-

sure and to the host controller.

Hawk 4 (Wide) Family Install Guide, Rev. A 3

___________________________________________

Before you begin

Verify that the system is switched off and discon-

nected from main power before any installation is

attempted.

Protect yourself, the drive, and your valuable pro-

grams and data by reading the following cautions

and warnings.

•Donot unpackdrivefrom its staticshielded bag until

you are ready to install it in the system.

•Always handle the drive by the frame or casting.

•Do not touch printed circuit board (PCB) or the I/O

connector pins.

•Never apply pressure to the PCB or to the drive top

cover.

•Donot tamperwithsealed top cover.Doing so voids

your warranty. The drive contains no user service-

able components. See Product Repair section for

moreinformation.

•Visually inspect the shipping container for any obvi-

ous damage.

4 Hawk 4 (Wide) Family Install Guide, Rev. A

___________________________________________

•Inspectdriveforpossibleshippingdamage.Allclaims

of this type should be filed promptly with the trans-

porterinvolved.Saveoriginalpackingmaterialstobe

used when reshipping.

•Verifyallpartslistedonshippingbillarereceivedwith

theequipment.Discrepanciesor damage should be

reported to the shipping company.

•When transporting or shipping a drive or system,

please ensure that they are correctly packed in

original Seagate approved (or equivalent) container

and shipped via an air-ride carrier experienced in

handling computer equipment.

Caution. Thecircuitassembliesandcomponentscon-

tainedinthisequipmentcanbedegradedor

destroyedbyElectrostaticOverstress(EOS)

or by Electrostatic Discharge (ESD).

Static electrical charges can accumulate

quicklyonpersonnel,clothingandsynthetic

materials. The electrostatic fields due to

these charges when brought in close prox-

imity to susceptible circuit assemblies and

components,canresultindegradedreliabil-

ity or immediate failure of the affected com-

ponent or assembly.

Hawk 4 (Wide) Family Install Guide, Rev. A 5

___________________________________________

To insure optimum reliable equipment op-

eration, it is required that technical support

personneldischargethemselvesbywearing

a grounding strap around the wrist and be

connected to a grounding terminal while

workingin thevicinity of,andwhile handling

EOS/ESD susceptible assemblies/parts. If

unavailable, ground yourself frequently by

touching the metal chassis of the system

beforehandlinganycomponents(thishelps

onlyifthesystemisconnectedtoaground).

Avoid static-inducing carpeted areas.

This

procedureisespeciallyimportantwhenhan-

dling printed circuit boards (PCBs).

6 Hawk 4 (Wide) Family Install Guide, Rev. A

___________________________________________

Safety instructions

1. The disc drive(s) are to be installed in a customer

suppliedenclosurewherethesurroundingairdoes

not exceed 50oC.

2. Four (4) 6-32 UNC-2A screws are required for

installation. Maximum screw length into side of

drive is 0.15 inches (3.81 mm). Maximum screw

lengthintobottomis0.20in.(5.08mm).Maximum

screw tightening torque is 6.0 in-lb (.675 NM) with

minimumthreadengagementof.12in.(3.05mm).

3. Thepower requirements areshown in Section1.0

ProductInformation.

4. The power supply must satisfy the safety require-

ments for SELV (Safety Extra Low Voltage) cir-

cuits.

5. Service is to be provided by trained Seagate ser-

vice personnel.

6. The incorporation of the disc drives listed in this

guide into a customer enclosure must meet the

appropriate safety requirements of the country in

which it is used (e.g. UL 1950, CAN/CSA-C22.2

No.950-M89,DINVDE0805:1993andEN60950:

1992 (IEC 950).

Note. Power must be off when connecting or discon-

necting.

Hawk 4 (Wide) Family Install Guide, Rev. A 7

___________________________________________

Sicherheitsanleitung

1. DäsGerätisteinEinbaugerät,vorgesehenfüreine

maximale Umgebungstemperatur von 50oC.

2. Zur Befestigung der Drive werden 4 Schrauben

benötigt (6-32 UNC-2A). Die maximale Länge der

Schrauben in der unteren Seite des Chassis darf

nicht mehr als 0.20 in (5.08 mm) betragen, die in

der oberen 0.15 in (3.81 mm). Maximalle

Schraubenanziehung von 6.0 in-lb. (.675 NM) mit

minimalen Gewindeansperuch .12 in. (3.05 mm).

3. Die Versorgungsspannungen werden im Kapitel

1.0 (Produkt Information) gezeigt.

4. Die Versorgungsspannung muss SELV entspre-

chen.

5. AlleArbeitendürfennurvonausgebildetemSeagate

Service-Personal durchgefürhrt werden.

6. Der Einbau des Drives muss den Anforderungen

gemässDINVDE0805:1993oderEN60950:1992

(IEC 950).

Vorsicht

ÁnsehlussoderEntfernungolerGeräteverbindungnur

beiabgeschalteterVersorgungsspannungvornehmen.

8 Hawk 4 (Wide) Family Install Guide, Rev. A

___________________________________________

Installation Overview

Installation of the drive can be divided into distinct

phases as outlined below. Some of these may not be

applicable to your particular installation requirements.

Refer to the individual drive installation sections for

specific information on your drive model.

•Driveconfiguration:Theusermustselectwhichof

thedrivefeaturesareappropriatetoenableforinstal-

lationintheirsystem.Thisisdonebywayoftheuser

configuration jumpers found on the drive PCB.

•Mechanical installation: After setting up the drive

configuration the drive must be mechanically in-

stalledinto the host system and the power and I/O

cables attached. Previously mentioned precautions

should be observed

•SCSI drives should not be defined in the CMOS:

The SCSI Host adapter has its own BIOS to handle

the Input/output procedures. The CMOS setting for

SCSI drive is either drive type zero, or the "no drive

installed"option.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Seagate Magazzinaggio

Seagate

Seagate ST980210A Manuale utente

Seagate

Seagate Savvio 10K Manuale utente

Seagate

Seagate ST9750423AS Manuale utente

Seagate

Seagate ST9100824A - Momentus 5400.2 100 GB Hard... Manuale utente

Seagate

Seagate Medalist ST31276A Manuale utente

Seagate

Seagate Spinpoint M8 Manuale utente

Seagate

Seagate ST12000NM0117 Manuale utente

Seagate

Seagate ST34520N - Medalist 4.55 GB Hard Drive Manuale utente

Seagate

Seagate ST650211CF Manuale utente

Seagate

Seagate Barracuda ST3000DM001 Manuale utente

Seagate

Seagate ST8000NM0065 Manuale utente

Seagate

Seagate BlackArmor PS110 Manuale utente

Seagate

Seagate Barracuda 180 Family Manuale utente

Seagate

Seagate CTT 8000 Manuale utente

Seagate

Seagate ST6000NM0014 Manuale utente

Seagate

Seagate ST318418N - Barracuda 18.4 GB Hard Drive Manuale utente

Seagate

Seagate ST9160310AS - Momentus 5400.5 160 GB Hard... Manuale utente

Seagate

Seagate Barracuda 7200.9 ST3160811AS Manuale utente

Seagate

Seagate ST8000DM002 Manuale utente

Seagate

Seagate ST500UM000 Manuale utente

Seagate

Seagate Medalist Pro ST34520W Manuale utente

Seagate

Seagate Pipeline HD Pro Serial ATA ST31000533CS Manuale utente

Seagate

Seagate ST3500320SV - SV35.3 Series - Hard Drive Istruzioni operative e di sicurezza

Seagate

Seagate ST34371N - Barracuda 4.3 GB Hard Drive Manuale utente

Manuali Magazzinaggio popolari di altre marche

QNAP

QNAP TS 32PXU Series Manuale utente

LaCie

LaCie RUGGED RAID Manuale utente

Freecom

Freecom CLS DOCK Manuale utente

PNY

PNY Attache P-FD64MBATT3 Manuale utente

HP StorageWorks MSL2024 Manuale utente

OLT

OLT 6x6 Maximizer Manuale utente

Transcend

Transcend JetFlash 160 Manuale utente

LaCie

LaCie RUGGED MINI Manuale utente

Thunderbolt

Thunderbolt 600 Manuale utente

Panasonic

Panasonic LB-DH8 series Manuale

Intel

Intel RAID High Availability Manuale utente

LaCie

LaCie 12big Thunderbolt 3 Manuale utente

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuale utente

Panasonic

Panasonic LKM-F931-1 Manuale utente

Tabernus

Tabernus Enterprise Erase E2400 Manuale utente

Rocstor

Rocstor COMMANDER 3F series Manuale utente

HP P9000 Manuale utente

Western Digital

Western Digital Ultrastar Data60 Manuale utente