Seagate Medalist 2532 Manuale utente
......................................
Medalist 2532 (ST32532A)
......................................
for ATA (IDE)-Compatible PCs
......................................
......................................
......................................
Installation Guide
......................................
-2 Medalist 2532, Rev. B
© 1997, 1999 Seagate Technology, Inc. All rights reserved.
Publication Number: 21200104-001, Rev. B, May 1999
Seagate, Seagate Technology and the Seagate logo are regis-
tered trademarks of Seagate Technology, Inc. Medalist, DiscWiz-
ard, SeaFAX, SeaFONE, SeaBOARD and SeaTDD are either
trademarks or registered trademarks of Seagate Technology,
Inc. or one of its subsidiaries. All other trademarks or registered
trademarks are the property of their respective owners.
Medalist 2532, Rev. B -1
Contents
The easiest way to install your drive.................................... 1
What you need........................................................................ 2
Before you begin .................................................................... 2
Handling precautions............................................................. 3
Master/slave jumpers............................................................. 4
Attaching cables and mounting the drive............................ 6
Configuring your computer................................................... 9
Addressing drive capacity limitations................................ 11
Partitioning and formatting your drive............................... 13
Installation using Disk Manager........................................ 14
Windows 95 or Windows 98 installation ........................... 15
Standard DOS installation................................................ 16
Additional installation options............................................ 18
Non-ATA compatible slave jumper...................................... 18
Cable select jumper ............................................................. 19
Advanced Disk Manager options........................................ 20
Troubleshooting ................................................................... 23
Alternate capacity jumper................................................. 25
Seagate Technology support services............................... 31
Storing and shipping your drive......................................... 37
iii
0 Medalist 2532, Rev. B
iv
Medalist 2532, Rev. B 1
The easiest way to install your drive
DiscWizardis Seagate’s exclusive Win-
dows program, provided on a diskette, that
makes it easy to install your Medalistdrive.
DiscWizard helps you configure your new
drive and your computer. It analyzes your
system, lets you select various installation
options and creates customized step-by-step instructions. It also
allows older computers to access the full capacity of large hard
drives.
You can run DiscWizard to install your new hard drive if:
•You already have an existing, bootable hard drive in your com-
puter with at least 3 Mbytes of available disc space,
and
•You are running Windows 95 or Windows 98.
If you can run DiscWizard, follow the instructions on the
DiscWizard diskette to install your drive. If you need additional
information, refer to this installation guide.
If you cannot run DiscWizard, follow the instructions in this
installation guide to install and configure your new drive.
2 Medalist 2532, Rev. B
What you need
•Straight-edge and Phillips screwdrivers
•Four 6-32 UNC drive mounting screws
•An ATA host adapter and interface cable (max length: 18
inches) with enough connectors for all your drives
•An unused drive power cable for your new drive
•A bootable DOS system diskette (Seagate recommends using
DOS Version 5.0 or later).
•If you are mounting this 3.5-inch drive in a 5.25-inch drive bay,
you need a mounting adapter or frame kit. Also, you may need
drive mounting rails if your drive bay is not designed for direct
mounting.
Before you begin
•Make sure your computer is turned off before you open the
case.
•Read the handling precautions following and inspect the drive
to make sure that it is not damaged.
•Save your foam-lined Seagatedisc drive box. This box has
been approved by Seagate for shipping a Seagate disc drive.
Using any other container or packing material voids your drive
warranty.
Medalist 2532, Rev. B 3
Handling precautions
Disc drives are extremely fragile. Do not drop or jar
your drive.
Keep the drive in its antistatic bag until you are
ready to install it.
Protect your drive from static discharge by making
sure you are well grounded before touching the
drive. We recommend wearing a grounded wrist
strap throughout the installation process. Do not
touch the connectors or any part of the printed cir-
cuit board.
Always handle the drive by its edges or frame.
Do not apply pressure or attach labels to the circuit
board or the top of the drive.
4 Medalist 2532, Rev. B
Master/slave jumpers
If your new Seagatedrive will be the only drive in your computer,
you do not have to change any jumper settings. In this case, skip
ahead to “Attaching cables and mounting the drive,” on page 6.
If you already have one hard drive in your computer and you are
installing a second drive, you must configure one drive as a mas-
ter and the other as a slave.
To configure the drive as a master or one drive only:
•Place a jumper on pins 5 and 6 (see Figure 1 on page 5).
The master drive usually defaults to being the “boot” drive
(drive C), from which the computer loads system software
when it first starts up.
To configure the drive as a slave:
•Remove all the jumpers.
•If you need to change the jumpers on your existing hard drive,
see the Disk Manager online manual, look on the drive label,
or contact the drive manufacturer.
Medalist 2532, Rev. B 5
Figure 1. Master and slave jumper settings
135
246
Slave
Master or single drive
pin 1
4-pin power
connector
ATA interface
connector
6 Medalist 2532, Rev. B
Attaching cables and mounting the drive
1. If you are attaching a new ATA interface cable to a single
drive, attach one end of the cable to the interface connector
on your host adapter or motherboard. Motherboard connec-
tors can be identified by the IDE or HDD 40-pin connector.
The ATA cable must be no more than 18 inches (457 mm)
long.
2. Thread the interface cable through the drive bay and attach
the connector at the end of the interface cable to your new
drive.
Note. If you have two drives, attach the second drive to the sec-
ond connector.
Figure 2. Attaching the cables
Caution. To avoid possible damage to your system,
make sure to align pin 1 on the host adapter or mother-
board with pin 1 on your drive or drives. Pin 1 on the
interface cable is usually indicated by a stripe along the
edge of the cable.
Pin 1
!
Indice
Altri manuali Seagate Magazzinaggio
Seagate
Seagate Barracuda ST3808110AS Manuale utente
Seagate
Seagate ST9120315AS - Momentus 5400.6 120 GB Hard... Istruzioni operative e di sicurezza
Seagate
Seagate ST125N Manuale utente
Seagate
Seagate ST3160215ACE Manuale utente
Seagate
Seagate SAVVIO ST9900805SS Manuale utente
Seagate
Seagate SV35 SERIES ST2000VX002 Manuale utente
Seagate
Seagate 1200 Manuale utente
Seagate
Seagate Backup Plus Desktop Manuale utente
Seagate
Seagate 15K.2 - Savvio 146.8 GB Hard Drive Manuale utente
Seagate
Seagate BARRACUDA ST1000LM049 Manuale utente
Seagate
Seagate BARRACUDA ST5000LM000 Manuale utente
Seagate
Seagate STCB4000102 Manuale utente
Seagate
Seagate Medalist 540sl ST5540A Manuale utente
Seagate
Seagate FreeAgent Desk Manuale utente
Seagate
Seagate Travan 40 Tape Drive STT2401A Manuale utente
Seagate
Seagate 2-Bay Manuale utente
Seagate
Seagate Cheetah 10K.7 SCSI Manuale utente
Seagate
Seagate ST303204N1A1A-RK - Hard Drive Retail Manuale utente
Seagate
Seagate ST403B Manuale del sistema
Seagate
Seagate NAS 400 Manuale utente
