Sealey VS0204B.V2 Manuale utente

BRAKE & CLUTCH BLEEDER CAP SET

MODEL NO: VS0204B.V2

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,

and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR

PERSONAL INJURYAND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

Item Part no. Description Applications Internal dia. Type

20 VS0204.V4-20 ADAPTOR CAP ‘1’ Chrysler, Jeep 43.5 Bayonet

21 VS0204.V4-21 ADAPTOR CAP ‘2’ Chysler, Jeep (Blanking cap) 43.5 Bayonet

22 VS0204.V4-22 ADAPTOR CAP ‘3’ GM, Chevrolet, Hummer, Mazda 49.5 Bayonet

23 VS0204.V4-23 ADAPTOR CAP ‘3’

90° ELBOW Ford Fiesta 2011 onwards 49.5 Bayonet

24 VS820SA ADAPTOR CAP ‘6’ Most European manufacturers 45 Thread

25 VS0204.V4-25 ADAPTOR CAP ‘7’ Universal N/A Rubber cone 30-55mm

26 VS0204.V4-26 ADAPTOR CAP’8’ Universal N/A Rubber cone

27 VS0204.V4-27 ADAPTOR CAP ‘9’ Honda 56 Bayonet

28 VS0204.V4-28 ADAPTOR CAP ‘10’ Nissan 34.5 Bayonet

29 VS0204.V4-36 ADAPTOR CAP ‘41’ Ford Mondeo 2014 onwards,

Ford Fiesta 2016 onwards,

Mazda CX3/CX5

49.5 Bayonet

30 VS0204.V4-30 ADAPTOR CAP ‘19’ Chysler, Hyundai, Mitsubishi,

Nissan, Subaru 50.7 Bayonet

31 VS0204.V4-31 ADAPTOR CAP ‘21’

90° ELBOW Toyota, Lexus 46.5

32 VS0204.V4-32 ADAPTORS (c/w

TUBES)

33 VS0204.V4-33 CLAMP ASSEMBLY

34 VS0204.V4-34 HOOK BOLT

35 VS0204.V4-35 CHAIN

VS0204B.V2 Issue 2 11/08/23

Original Language Version

VS0204B.V2 Issue 2 11/08/23

Original Language Version

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR

01284 757500 sales@sealey.co.uk www.sealey.co.uk

ENVIRONMENT PROTECTION

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be

sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When

the product becomes completely unserviceable and requires disposal, drain any uids (if applicable) into approved

containers and dispose of the product and uids according to local regulations.

Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior

notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call our

technical team on technical@sealey.co.uk or 01284 757505.

Important: No Liability is accepted for incorrect use of this product.