SealMaster SK300 Manuale utente
S:\Engineering\13-Operator Manuals\Current\HANDAGITATOR_V2.0_JUNE2019.docx
HAND AGITATED MIXING TANK
Owner’s Manual
Version 2.0
Issue Date: June 2019
Effective Date: April 2019
Version
Date
Changes
Approval
1.0
Original Issue
2.0
6/19
New Format and Updates
DS
Table of Contents
CORRESPONDENCE ............................................................................................................. 2
SealMaster® LIMITED WARRANTY ..................................................................................... 3
SAFETY PRECAUTIONS AND CAUTIONS ............................................................................. 4
PRECAUTIONS................................................................................................................... 4
CAUTIONS......................................................................................................................... 4
MANUAL COVERAGE........................................................................................................... 5
HAND AGITATED MIXING TANK SKID AND TRAILER MOUNTED ...................................... 5
OPERATING INSTRUCTIONS................................................................................................ 6
CHECKLIST......................................................................................................................... 6
BEFORE STARTING THE ENGINE ....................................................................................... 6
STARTING THE ENGINE..................................................................................................... 7
ADDING MATERIAL........................................................................................................... 8
POURING MATERIAL......................................................................................................... 8
MACHINE MAINTENANCE................................................................................................... 9
MAINTENANCE SCHEDULE ............................................................................................... 9
TROUBLE SHOOTING ...................................................................................................... 10
WIRING DIAGRAMS .......................................................................................................... 11
ELECTRIC BRAKES AND RUNNING LIGHTS......................................................................11
TANK CAPACITY CHART .................................................................................................... 12
MATERIAL DEPTH AND GALLON VOLUME ..................................................................... 12
MACHINE PICTURES AND PARTS LIST ..............................................................................13
PARTS LIST PICTURE-1 .................................................................................................... 14
PARTS LIST PICTURE-2 .................................................................................................... 15
PARTS LIST PICTURE-2 .................................................................................................... 16
PARTS LIST PICTURE-3 .................................................................................................... 17
PARTS LIST PICTURE-4 .................................................................................................... 19
PARTS LIST PICTURE-5 .................................................................................................... 20
2
ThorWorks Industries, Inc.
Purchased by __________________________ Model NO. _______________________
Company Name _______________________ Serial NO. _______________________
Address ________________________________ Acceptance Date ________________
City _____________ State______ Zip _______
CORRESPONDENCE
All Correspondence regarding this equipment, as well as general correspondence should be addressed to:
ThorWorks Industries, Inc.
PO Box 2277
Sandusky, OH 44870
In referring to the equipment, kindly state the Model Number, Serial Number and any part number involved
`
3
SealMaster® LIMITED WARRANTY
SealMaster warrants that its products are of quality material and workmanship. SealMaster
agrees to replace, within a period of one (1) year from date of delivery, or at its option, repair,
without charge, any part of their manufacture which proved defective. The repair or
replacement will be free of charge F.O.B. Sandusky, Ohio, proving the damaged part or parts
are returned, freight prepaid, to SealMaster and investigation show such repair or replacement
is made necessary by an inherent defect of material or workmanship.
It is hereby understood that engines, motors, pumps, or other components purchased by
SealMaster for use on its equipment are not warranted by SealMaster and are sold only with
the standard warranty of the manufacturer of that component.
SealMaster will make no allowances for repairs or alterations completed by outside sources
unless authorization is in writing and approved by an authorized SealMaster representative.
Any claims for defective material or workmanship must be made prior to the expiration of thirty
(30) days from the date failure occurs, and in all cases prior to the expiration of the warranty
period of one (1) year. It is the intent of this paragraph to limit SealMaster’s liability solely to
the cost of replacement parts, F.O.B. factory, or at the option of SealMaster to repair of the
defective part or parts. No allowances for damages, lost time, or any other claim will be
recognized.
This warranty is null and void if other than genuine SealMaster parts are used.
SealMaster is constantly striving to improve their products. Changes in design and
improvement will be made whenever the manufacturer believes the efficiency of the product
will be improved, without incurring any obligation to incorporate such improvements in any
machines which have been shipped or are in service.
In an effort to continue to improve product quality, SealMaster reserves the right to change
specifications without notice.
Any modification or alteration of this machine without prior approval of the manufacturer may
void this warranty.
4
SAFETY PRECAUTIONS AND CAUTIONS
PRECAUTIONS
•Always wear eye and ear protection, and gloves.
•Be aware of all CAUTION, WARNING, DANGER signs on the unit.
•Read all Owners Manuals that come with this unit.
•Make sure the operator is familiar with the units’ operation.
CAUTIONS
•Keep hands, feet, and clothing away from moving parts.
•Do not operate the machine without all guards in place.
•Stop the Agitator when opening the lid for any reason.
5
HAND AGITATED MIXING TANK
APPLIES TO ALL SK300, SK575 & TR300
MANUAL COVERAGE
HAND AGITATED MIXING TANK SKID AND TRAILER MOUNTED
This manual cover model sizes 300 and 575 gallon tanks.
SealMaster® Hand-Agitated Sealcoat Mixing Tanks set the industry standard for
skid mount and trailer mount hand-agitated sealcoat mix tanks.
SealMaster Hand-Agitated Sealcoating Mixing tanks are available in several sizes
and configurations. SealMaster Hand-Agitated Mixing Tank can be carried in the
back of a truck (skid mounted) or towed behind (trailer mounted).
Ideal for gravity flow sealcoat applications or a pump can be attached for spray
applications. SealMaster sealcoating equipment has set the sealcoating
equipment industry standards for quality, performance and durability for over 40
years.
6
HAND AGITATED MIXING TANK
APPLIES TO ALL SK300, SK575 & TR300
WITH OPTIONAL HYDRAULIC AGITATION
OPERATING INSTRUCTIONS
STARTUP
CHECKLIST
•Check engine oil level. Follow manufacturers guidelines as to
type and frequency of changes.
•Check hydraulic oil level. Use grade AW68 hydraulic oil.
•Fill fuel tank with gasoline for engine.
BEFORE STARTING THE ENGINE
Make sure the agitator control valve #6 is in the neutral position.
6AGITATOR
CONTROL VALVE
7
HAND AGITATED MIXING TANK
APPLIES TO ALL SK300, SK575 & TR300
WITH OPTIONAL HYDRAULIC AGITATION
OPERATING INSTRUCTIONS
STARTUP
STARTING THE ENGINE
•Set the fuel shutoff and choke levers to the on position.
•Set the throttle lever at ½ open.
•Set the engine on/off switch to on position.
•Pull start the engine.
•It is important that when you are done running the engine
that the fuel shutoff lever is turned to the off position. This keeps
gasoline from mixing with oil as you are driving.
Refer to the engine manual.
ENGINE
PULL START
HANDLE
CHOKE
FUEL
THROTTLE
ON/OFF
SWITCH
8
OPERATING INSTRUCTIONS
APPLIES TO ALL SK300, SK575 & TR300
WITH OR WITHOUT OPTIONAL HYDRAULIC AGITATION
ADDING MATERIAL
1. Open the material tank lid and add pavement sealer with or
without sand. Close the lid.
2. Turn the hand crank lever #25, or engage the hydraulic
agitator, until the sealer is mixed thoroughly.
3. Mix periodically during the day, to keep material consistent.
POURING MATERIAL
4. Open valve #21 to pour out sealer.
5. Apply Sealer with a squeegee or brush.
25 HAND
CRANK
21 VALVE 2”
Altri manuali per SK300
1
Questo manuale è adatto per i seguenti modelli
2
Indice
