Seaward Test 'n' Tag Manuale utente
Test ‘n' Tag
Label Printing System
Instruction Manual
Bracken Hill, South West Industrial Estate, Peterlee, Co.
Durham SR8 2SW. En land.
Tel: +44 (0)191-586 3511 Fax: +44 (0)191-586 0227
www.seaward.co.uk
sales @ seaward.co.uk
calibration @ seaward.co.uk
Test `n' Tag
Label Printing System
Instruction Manual
308A550
April 2009
© 2008 Seaward Electronic Ltd.
Issue 6
2
Limited Warranty & Limitation of Liability
SEAWARD Electronic Limited uarantees this product for a period of 1
year. The period of warranty will be effective from the day of delivery.
© Copyri ht 2008
All ri hts reserved. Nothin from this edition may be multiplied, or
made public in any form or manner, either electronically, mechanically,
by photocopyin , recordin , or in any manner, without prior written
consent from SEAWARD Electronic Limited. This also applies to
accompanyin drawin s and dia rams.
Due to a policy of continuous development SEAWARD Electronic
Limited reserves the ri ht to alter the equipment specification and
description outlined in this publication without prior notice and no part
of this publication shall be deemed to be part of any contract for the
equipment unless specifically referred to as an inclusion within such
contract.
3
Disposal of Old Product
This product has been desi ned and manufactured with hi h quality
materials and components that can be recycled and reused.
When the crossed out wheelie bin symbol is attached to a product it
means the product is covered by the European Directive 2002/96/EC.
Please familiarise yourself with the appropriate local separate collection
system for electrical and electronic products.
Please dispose of this product accordin to local re ulations. Do not
dispose of this product alon with normal waste material. The correct
disposal of this product will help prevent potential ne ative
consequences for the environment and human health.
4
Table of ontents
Before Startin ....................................................................................... 5
1. Introduction ....................................................................................... 6
2. Installing the Supply Cartridge .......................................................... 7
3. Printing a Test Label .......................................................................... 8
4. Printing Labels ( PrimeTest Rigel ) ................................................. 9
Bluetooth Favourites ......................................................................... 9
Printin labels.................................................................................. 11
Load Test’n’Ta Lo o ..................................................................... 12
5. Printing Labels ( Supernova Europa ) ........................................... 15
Re –Test Period............................................................................... 16
Download to Transfer Printer .......................................................... 17
Automatic Printin of Labels........................................................... 19
Chan in the label title ................................................................... 21
Addin a lo o to the label ............................................................... 23
Label Title ........................................................................................ 24
Test `N’ Ta Lo o............................................................................ 25
Transfer ........................................................................................... 26
6. Trouble Shooting ............................................................................. 27
7. Parts List .......................................................................................... 30
5
Before Starting
1. Check that all the component parts are present: -
•Portable Printer
•AC Adaptor
•Printer Lead
•Supply Cartrid e
•Peel Stick
•Peel Stick Instruction sheet
•Instruction Manual (with Warranty Card)
•PATGuard 2 evaluation disc
•Download Lead
2. Read the operatin instructions fully before usin the Test 'N'
Ta system.
3. Contact Seaward Electronic if you need information on
trainin for Portable Appliance Testin .
4. Data may be lost or altered in virtually any electronic memory
under certain circumstances. Therefore Seaward Electronic
assumes no responsibility for financial losses or claims due to
data lost or otherwise rendered unusable whether as a result
of abuse, improper use, defects, disre ard of operatin
instructions or procedures, or any other allied causes.
5. Seaward Electronic Limited can be contacted at:
Bracken Hill
South West Industrial Estate
Peterlee
Co. Durham
SR8 2SW
Tel : +44 (0)191 586 3511
Fax: +44 (0)191 586 0227
6
1. Introduction
Test 'N' Ta is the label printin system exclusive to the Seaward
Group. It enables users of Seaward and Ri el testers to print thermal
transfer labels directly to the Test 'N' Ta portable printer.
Note
The Test 'N' Tag system can be used with a range of Seaward
and Rigel test equipment including:-
Seaward SuperNova
Seaward Europa
Seaward PrimeTest 300 and 350
Rigel 288
.. and others…
The industrial vinyl labels created by the Test 'N' Ta printer are scuff
proof, water proof, tamper proof and unlike direct thermal labels, the
print will not fade in sunli ht.
Two types of label can be printed; a panel label - to attach direct to
the appliance panel, a cable wrap label - to wrap around the power
cord.
Note:
The PatGuard 2 evaluation disc also contains the logo transfer
program for SuperNova Europa testers. The DataTransfer.exe
program for Handheld testers is supplied with the tester itself.
7
2. Installing the Supply Cartridge
1. Lift the unit's dust cover.
2. Make sure the lockin spindle is in the counter-clockwise
(unlocked) position.
3. On the bottom of the cartrid e, turn the ribbon advance one
full turn counter clockwise (follow arrows on cartrid e) or until
any slack in the ribbon is removed. THIS IS VERY
IMPORTANT.
4. Load the supply into the printer makin sure the cartrid e is
properly seated.
5. Turn the lockin spindle one-quarter turn clockwise to lock
the cartrid e into place.
8
3. Printing a Test Label
Connect the supplied AC adapter to the back of the Printer.
Connect the AC Adapter to the power outlet.
Note
Each of the Printer AC Adapters is unique to, and will only operate
with the appropriate K3000-PC K3110-PC Printer. They are NOT
interchangeable, misuse will cause damage to the printer and or
adapter.
1. Press the POWER button to turn the unit off. The power li ht
LED will o out.
2. Press and hold down the FEED button, then press the POWER
button to turn the unit's power back on. The unit will print a
test label similar to the one shown below.
K3110-PC
Ver. X
.Xx
3. Examine the test label. The printin should be dark and
uniform with no distortion. If the self-test results differ
markedly from those expected, refer to the troubleshootin
section of this document.
9
. Printing Labels ( PrimeTest / Rigel )
Note
This section should be read with reference to the tester's
Instruction Manual
The Test’n’Ta printer can be used with the followin handheld
test instruments:-
Primetest 300, Primetest 350, Ri el 288, Ri el 388
In this case the printer must be used to ether with the bluetooth
adapter (part number 342A914 )
Labels can be printed either at the end of a test or at any other
time from test results stored in the memory.
Bluetooth Favourites
Before use, the bluetooth adapter needs to be paired with the
tester.
The followin shows how to add a Printer to Bluetooth Favourites.
Use the up/down arrow keys to hi hli ht the device type (in this case
Printer) then press Setup (F3).
Indice
Altri manuali Seaward Etichettatrice
