Seco SX-600 Manuale utente
2
Preface
Thank you for choosing our product, for a better understanding of the product, we recommend
you read the instruction and safety information before use.
Note:
Only place this DVR on a flat level surface, secure so it will not fall.
Make sure to install this unit in a properly ventilated area to prevent the device from
overheating
Do not block the vents on the DVR as this will drastically shorten the life space of the
hard drives
Do not disassemble this unit; repairs must be performed by qualified technician.
Do not put liquid on or around this device
This product is designed to operate between 32°F and 104°F, and 0% to 90% Humidity.
Do not install this device in conditions outside of its normal operating range as this will
void the warranty.
Statement:
We do our best to make sure this manual is error free, although errors or omissions
may still occur.
This document is a user manual only. It contains no implied or stated warranty or
guaranty for the product described herein.
3
The reproduction, transmission, plagiarism, translation into other languages, or
otherwise illegal act without written authorization is strictly prohibited.
Contents
1 System Startup ................................................................................................................... 5
1.1 System Startup ................................................................................................... 5
2 Setup Wizard .................................................................................................................... 5
2.1 Setup Wizard Interface ...................................................................................... 5
2.2 Setting the Administrators Password ................................................................5
2.3 Basic Setup .........................................................................................................6
2.4 Network Setup ..................................................................................................... 8
2.5 Network Testing................................................................................................. 8
2.6 DDNS & Port Setup ............................................................................................ 10
2.7 Record Mode & Record Setup ......................................................................... 11
2.8 HDD Setup........................................................................................................ 12
3 Basic Operations............................................................................................................... 13
3.1 Live View: ......................................................................................................... 13
3.2 The Menu Bar: ................................................................................................. 13
3.3 Logging in to the DVR:...................................................................................... 14
4 Main Menu ....................................................................................................................... 15
4.1 Basic Menu....................................................................................................... 15
4.1.1 System Menu .............................................................................................. 15
4.1.2 Date/Time ................................................................................................... 16
4.1.3 Display......................................................................................................... 17
4.1.4 Record ......................................................................................................... 19
4.1.5 Users ........................................................................................................... 20
4.2 Advanced Menu ............................................................................................... 21
4.2.1 Alarm........................................................................................................... 21
4.2.2 Network ...................................................................................................... 24
4.2.3 COMM ......................................................................................................... 26
4.2.4 P.T.Z............................................................................................................. 29
4.3 Search Menu .................................................................................................... 30
4.3.1 Searching for Video..................................................................................... 30
4.3.1 Video Playback Screen and Timeline Playback ...........................................31
4.4 Log Search Menu ............................................................................................. 34
4.4.1 Searching the System Log ...........................................................................34
4.5 Disk Menu ........................................................................................................ 35
4.5.2 Checking Hard Drive (HDD) ......................................................................... 35
4.6 Information Menu............................................................................................ 36
4.6.1 Device Information ..................................................................................... 36
4.6.2 Network Information .................................................................................. 36
4
4.6.3 Online Information...................................................................................... 37
4.6.4 Record Information..................................................................................... 39
4.7 Maintenance Menu.......................................................................................... 39
4.7.1 Basic Functions............................................................................................ 39
4.7.2 Settings Functions ....................................................................................... 40
5.0 Remote Viewing ............................................................................................... 41
5.1 Remote Viewing via the Cloud.................................................................... 41
5.2 Remote Viewing via PC ViewClient .............................................................44
5.3 Remote Viewing via Mac ViewClient ..........................................................44
5.4 Internet Explorer......................................................................................... 51
Appendix A: Determining Your MAC Address......................................................................... 60
Appendix B: Internet Explorer Security Setup Guide..............................................................61
Appendix C: Viewing your DVR in Chrome ............................................................................. 67
Appendix D: Viewing your DVR in Firefox............................................................................... 68
Appendix E: Determining Network Information ..................................................................... 70
Appendix F: Port Forwarding ..................................................................................................72
Appendix G: Recommended PTZ Camera Setup..................................................................... 77
Appendix H: How to Setup Alarm Inputs ................................................................................ 79
5
1 System Startup
1.1 System Startup
Powering the DVR On
Connect the HDMI, VGA, or BNC output of the DVR to a TV or monitor. Make sure your TV or
Monitor is plugged in, powered on, and on the right input. Plug the included power plug in to
an AC outlet and in to the power port on the back of the DVR. The DVR will automatically run a
system check, and will start loading after few seconds. You will see the Setup Wizard after the
system has finished loading.
2 Setup Wizard
The Setup Wizard will guide you through configuring the basic settings for your DVR such
as; the administrator password, time settings, record settings, hard drive settings, etc… This
wizard can be turned off by checking the box labeled “Do not display this wizard on startup”. It
can also be enabled or disabled from the Basic Menu. Once completed the wizard will close and
your cameras will be displayed on the screen.
2.1 Setup Wizard Interface
The Setup Wizard’s Graphical User Interface (GUI) welcome screen is shown below. We
recommend completing each step of the setup wizard before configurin g any additional
settings in the DVR. Begin configuring your DVR by clicking the “Next” button near the bottom
right.
6
2.2 Setting the Administrators Password
The first step we recommend taking is configuring a username and password for the
administrator. This will prevent unauthorized access to many of your DVRs important
functions. Do not share or display the administrator’s password of your DVR. We recommend
creating a user name for each person that will access the DVR (After completing the setup
wizard, see section 4.1.5 on how to create additional users).
Click "Next" to go on to the next window. You may also click “Cancel” to exit the Setup
Wizard or “Prev” to return to the previous menu.
***Note: By default, the administrator user name is: admin. There is no password, but for
better security, we strongly recommend that you setup a password here. ***
2.3 Basic Setup
Configuring the Date/Time,Time Zone,DST and Language are essential for proper
operation of your DVR. You can also configure the Date/Time Format, as well as the Video
Format on this screen. Most users find the default values acceptable:
System Tab:
7
Video Format: Select NTSC for the America Regions or PAL for European Regions.
Language: Please select your appropriate language here.
Time Tab:
Date/Time: Here you can set the date and time. Click the calendar icon to the right of
the date to choose the correct date, and then click the time. A digital number pad will
appear and allow you to set the time.
Date Format: Here you can set the way the date will be displayed and recorded.
Time Format: Here you can select whether the time will be displayed in 24hr or 12hr
format.
Time Zone: Here you can set the correct time zone for your location.
Auto Update: Check this box to allow the DVR to automatically sync its time with the
internet time servers.
Time Server: You can select which internet time servers you would like to sync with.
DST Tab:
8
Enable: This will enable or disable the Daylight Savings Time (DST) function.
Mode: you can choose to set DST by a specific date, or by week number.
Offset: This will adjust the time by one or two hours during DST.
From: This is the day that DST will start (Currently the 2nd Sunday in March at 2AM).
To: This is the day that DST will end (Currently the 1st Sunday in November at 2AM).
2.4 Network Setup
There are many different ways to setup the DVR on the network. By default the DVR comes
setup for the automated Cloud Setup, which allows you to remote view your DVR from
anywhere in the world without having to do any additional setup. For the default Cloud Setup,
you must select “Obtain IP Address Automatically” and “Obtain DNS Server Address
Automatically”. See section 4.2.2 for more information on network settings after completing
the setup wizard. Click “Next” to continue to the next screen:
2.5 Network Testing
The system will automatically test your network setup. If the network settings are not
correct, please return to the previous page to correct the settings and then click Next. If no
testing is required, just click Skip to go to the next screen:
9
10
2.6 DDNS & Port Setup
Dynamic Domain Name Service (DDNS) and Port settings can be configured here. For the
automated remote view Cloud Setup;DDNS must be enabled and the server must be set to
Cloud Setup. Most users will find the default DDNS and port settings to be acceptable. See
section 4.2.3 for more information on DDNS once you have completed the setup wizard. Click
Next to move on to the next screen:
DDNS Tab:
DDNS: Here you can enable or disable the DDNS function.
Server: Here you can select a DDNS provider from the drop down list.
Default: This will use the selected DDNS providers default server settings.
Server Address: The address of the DDNS provider if you are not using the default value.
Server Port: The port number of the DDNS server if you are not using the default value.
Host Name: This is your assigned DDNS address.
Username: This is your DDNS Username.
Password: This is your DDNS Password.
Port Tab:
Indice
