SECUBEST 2.0M HD SDI Fixed Manuale utente
Indoor Drop Ceiling Camera
2.0M HD SDI Fixed
Ver. / 2014.0
User’s Manual
Before installing and using the camera, please read this manual carefully.
Be sure to keep it handy for future reference.
Safety Information
This symbol indicates that dangerous voltage
consisting a risk of electricshock is present within
this unit.
Warning Precaution
This exclamation point symbol is intended to alert the
user to the presence of important operating and
maintenance (servicing)instructions in the literature
accompanying the appliance.
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION:
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
To prevent damage which may result in fire or electric shock
hazard, do not expose this appliance to rain or moisture.
WARNING
Be sure to use only the standard adapter that is specified in
the specification sheet. Using any other adapter could cause
fire, electrical shock, or damage to the product.
Incorrectly connecting the power supply or replacing battery
may cause explosion, fire, electric shock, or damage to the
product.
Do not connect multiple cameras to a single adapter.
Exceeding the capacity may cause excessive heat generation
or fire.
Securely plug the power cord into the power receptacle.
Insecure connection may cause fire.
When installing the camera, fasten it securely and firmly.
A falling camera may cause personal injury.
Do not place conductive objects (e.g. screw drivers, coins,
metal items, etc.) or containers filled with water on top of
the camera. Doing so may cause personal injury due to fire,
electric shock, or falling objects.
Do not install the unit in humid, dusty, or sooty locations.
Doing so may cause fire or electric shock.
If any unusual smells or smoke come from the unit, stop
using the product. Immediately disconnect the power sorce
and contact the service center. Continued use in such a
condition may cause fire or electric shock.
If this product fails to operate normally, contact the nearest
service center. Never disassemble or modify this product in
any way.
When cleaning, do not spray water directly onto parts of the
product. Doing so may cause fire or electric shock.
WARNING
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Precaution
Operating
• Before using, make sure power supply and all other parts are
properly connected.
•While operating, if any abnormal condition or malfunction
is observed, stop using the camera immediately and contact
your dealer.
Handling
• Do not disassemble or tamper with parts inside the camera.
• Do not drop the camera or subject it to shock or vibration as
this can damage the camera.
• Clean the clear dome cover with extra care. Scratches and
dust can ruin the quality of the camera image.
Installation and Storage
• Do not install the camera in areas of extreme temperature,
exceeding the allowed range.
• Avoid installing in humid or dusty environments.
• Avoid installing in places where radiation is present.
• Avoid installing in places where there are strong magnetic
elds and electric signals.
• Avoid installing in places where the camera would be subject
to strong vibrations.
• Never expose the camera to rain or water.
2
Important Safety Instructions
1. Read these instructions. - All these safety and operating instructions should be read before the product is
installed or operated.
2. Keep these instructions. - The safety, operating and use instructions should be retained for future reference.
3. Heed all warnings. - All warnings on the product and in the operating instructions should be adhered to.
4. Follow all instructions. - All operating and use instructions should be followed.
5. Do not use this device near water. - For example: near a bath tub, wash bowl, kitchen sink, laundry tub, in a wet
basement; near a swimming pool; etc.
6. Clean only with dry cloth. - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. - Slots and
openings in the cabinet are provided for ventilation, to ensure reliable operation of the product, and to protect it
from over-heating. The openings should never be blocked by placing the product on bed, sofa, rug or other similar
surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper
ventilation is provided and the manufacturer’s unstructions have been adhere to.
8. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including ampliers)
that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade
or the third prong are provided for your safety. If the provided plug does not t into your outlet, consult an
electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and
the point where they exit from the apparatus.
11. Only use attachments/accessories specied by the manufacturer.
12. Use only with cart, stand, tripod, bracket, or table specied by the
manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid
injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged
in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been
dropped.
3
Disposal of Old Appliances
1. When this crossed-out wheel bin symbol is attached to a product it means the product is covered by
the European Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of separately form the municipal waste
stream stream in accordance to laws designated by the government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential negative consequences for
the environment and human health.
4. For more detailed information about disposal of your old appliance, please contact your city oce,
waste disposal service or the shop where you purchased the product.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user
will be required to correct the interferenece at his own expense.
4
Product & Accessories
Introduction -
Deco-rings (White & Black)
Camera
Dome Cover
Screw &
Plastic Anchor-2pcs
Manual CD
Quick Manual
OSD Joy
(Option)
Template Sheet
Terminal Block
RS-485RS-485
5
Part Name
Introduction -
Flush Mount Bracket
Body
Deco-ring
Dome
Handle
Gimbal
Hook
Head Screw
Tilt Stopper Screw
Lens
6
Installation -
Before Installation
Before installing your camera, you have to read the following cautions.
1. You have to check whether the location can bear ve times of the weight of your camera.
2. Don’t let the cable to be caught in improper place or the electric line cover to be damaged. Otherwise
it may cause a breakdown or re.
3. When installing your camera, don’t allow any person to approach the installation site. If you have any
valuable things under the place, move them away.
1To detach the body from ush mount bracket,
turn the body CCW and pull.
7
Installation Using Screw
Installation -
Template Sheet
2
1
2
3
4
5
6
7
8
Disassemble the camera. See the section ‘Disassemble
the Camera’ for details.
Using the template sheet, make the ush mount
bracket hole on the ceiling.
After inserting the cables through ush mount bracket
into the ceiling hole and fox the ush mount bracket
on the ceiling using the screws provided.
Connect the cables respectively. See the section
'Cabling' for details.
After inserting the body into the ush monut bracket,
turn of clockwise to x the body to the ush mount
bracket.
As below, when you insert the body into the ush
mount bracket, align the red point of body with red
point of ush mount bracket.
3
4
To achieve desired view direction and orientation,
rotate 3-axis gimbal. To x the setting, tighten the tilt
stopper screw.
Put on the dome cover to the body.
Detach the protection lm from the dome cover.
Red Point
5
7
8
8
Installation Using Hooks
Installation -
1
2
3
4
5
Disassemble the camera. See the section ‘Disassemble
the Camera’ for details.
Using the template sheet, make the hole on the ceiling.
After inserting the cables through ush mount bracket,
insert the ush mount bracket into the ceiling hole.
To hook the ush mount bracket, push and turn head
screw clockwise using the +driver.
6
5
Connect the cables respectively. See the section
'Cabling' for details.
After inserting the body into the ush monut bracket,
turn of clockwise to x the body to the ush mount
bracket.
As below, when you insert the body into the ush
mount bracket, align the red point of body with red
point of ush mount bracket.
Red Point
6
7
8
9
To achieve desired view direction and orientation,
rotate 3-axis gimbal. To x the setting, tighten the tilt
stopper screw.
Put on the dome cover to the body.
Detach the protection lm from the dome cover.
Template Sheet
2
3
8
9
9
Cabling
Installation -
HD-SDI
Power RS-485
Terminal
Block
1
2
3
1
2
HD-SDI
Connects to video output device such as a monitor using a
BNC coaxial cable.
Power
Power Connection - DC 12V.
3RS-485 Communication
Connects to device such as DVR or Keyboard Controller.
RS-485RS-485
10
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali SECUBEST Telecamera di sicurezza
