Seculink AVR7804LN Manuale utente
SECULINK DVR Operation Instruction
Please read the instruction carefully before using, and keep it properly
Fit Models:
AVR7804LN, AVR7808LN, AVR7816LN,
AVR7804L-M, AVR7808L-M, AVR7816L-M,
AVR7804L-ME, AVR7808L-ME, AVR7816L-ME,
AVR5308LN, AVR5316LN,
AVR5308L-M, AVR5316L-M.
AVR5308L-ME, AVR5316L-ME,
......
Need Help? Visit us online for up-to-date software and complete instruction manuals.
SECULINK TECHNOLOGY (HK) LIMITED
SHENZHEN SECULINK TECHNOLOGY CO., LTD
Website: www.seculink.net
E-mail: info@seculink.net
Information in this document is subject to change without prior notice. As our products are subject to
continuous improvement, SECULINK and our subsidiaries reserve the right to modify product design
and specifications, without notice and without incurring any obligation
SECULINK AHD DVR Connection Diagram
Camera (For reference only)
Camera BNC Port
BNC Port
DVR
Router
APP (XMeye)
CONNECTION AND SETUP
Before the AHD DVR is powered on, make sure you have installed a hard disk and connected at least one
security camera. For details, please refer to the following sections.
The DVR is designed to automatically detect the video system of the connected cameras (NTSC or PAL).
HDD Installation
A SATA HDD is required before the DVR is powered on.
Camera Connection
The cameras must be connected and power-supplied before the DVR is powered on. Connect the
camera with the indicated power supply. Then, connect the camera video output to the DVR video
input port with a coaxial cable or RCA cable with BNC connectors.
Interface Specification
Symbol
Specification
DC 12V
DC12V
USB
USB Port, for USB drive and mouse etc
LAN
LAN Port
HD-OUT
HD-OUT Port
VGA
VGA Port
AV-OUT
Video input port, enter the video signal source, such as DVR, digital TV video
signal
AUDIO IN
Audio in, use RCA to connect audio input device, such as pick-up
AUDIO OUT
Audio output, use RCA to connect audio output device, such as active
speaker
BNC
Analog signal input port
RS485
PTZ control
Quick Menu
Specification for main menu
Main interface content description
Network
Phone app, Network, Email, Net service
Mode switch
Digital, Network, Analog, Hybrid
Info
Version, Log, Hdd info
Record
Encode, Record, Play Back
Alarm
Motion Detect, Video Blind, Video Loss Alarm Input/Output etc
System
General, Display, Channel Title, Storage etc
Main Menu
Sub Menu
Functional Outline
Recording
recording
setting
Set each channel recording configuration, recording type,
recording time period, etc.
recording
playback
Video query, video playback, video file save
picture
storage
Set each channel capture configuration, capture type,
capture time period, etc.
Recording
backup
Detect backup devices, format backup devices, back up
selected files
Alarm
Motion
detection
Set motion detection alarm channel, sensitivity, area, and set
linkage parameters: arming time period, alarm output, screen
prompt, record, pan/tilt, round robin, buzzer, EMAIL, FTP
upload, mobile phone report
Video Shade
Set video shade alarm channel, sensitivity, and set linkage
parameters: arming time period, alarm output, screen
prompt, record, pan/tilt, round patrol, beep, EMAIL, FTP
upload, mobile phone report
Video Loss
Set the video loss alarm channel, and set the linkage
parameters: arming time period, alarm output, screen
prompt, record, pan/tilt, round robin, buzzer, EMAIL, FTP
upload, mobile phone report
Alarm Input
Set alarm input channel, device type, and set linkage
parameters: arming time period, alarm output, screen
prompt, record, pan/tilt, round robin, buzzer, EMAIL, FTP
upload, mobile phone report
Alarm
Output
Set alarm mode:configuration,manual,close
PS:Some devices don’t support this function
Exception
handling
No hard disk, hard disk error, insufficient hard disk space,
network disconnection event, IP conflict time, set linkage
parameters: screen prompt or buzzer
Smart
Analysis
Determine algorithm rules: perimeter alert, item care, video
diagnosis.
Set rules: display trace, sensitivity, minimum moving
distance, alert mode, and set linkage parameters: arming
time period, alarm output, screen prompt, record, pan/tilt,
round robin, buzzer, EMAIL, FTP upload, mobile phone
report
System
Normal
setting
Set system time, date format, time format, language, hard
disk full operation, device id number, video signal standards,
output mode, standby time, device name, daylight saving
time
Code Setting
Set the main coding and combined coding parameters for
each channel: coding mode, resolution, frame rate, code
stream control, picture quality type, code stream value, one
frame interval parameter, video/audio enable
Network
Setting
Set basic network parameters, and set DHCP, DNS
parameters, network high-speed download, network
transmission strategy
Network
Service
PPPOE, NTP, Email, IP permissions, DDNS parameters,
PMS, FTP, alarm center, cloud service, RTSP, wireless
dialing, WIFI, etc.
Output Mode
Set the channel name of the front end, preview prompt icon
status, transparency, area coverage, time title, and overlay of
channel titles.
PTZ Setting
Set channel, PTZ protocol, address, baud rate, data bit, stop
bit, check
RS485
Device
Set protocol, address, baud rate, data bit, stop bit, check.
PS:full digital channel displays RS485 device
Serial
Setting
Set serial port function, baud rate, data bit, stop bit, check
Round Robin
Setting
Set the mode and interval of the round robin
Spot Setting
Set round robin mode and interval time of Spot output end
Manage
Channel
Managemen
t
Set the channel mode, view the channel status, and set the
parameters of the digital channel.
Storage
Managemen
t
Set the specified hard disk as read/write disk, set as
read-only disk, set to redundant disk, clear data, restore
data, etc.
User
Managemen
t
Modify users, modify groups, change passwords, add users,
add groups, delete users, delete groups
Online Users
The network user who has logged in can be forcibly
disconnected. After disconnection, the account will be frozen
and can be restored after the next boot.
Output
Adjustment
Adjust the top margin, bottom margin, left margin, right
margin, black border vertical and black border horizontal.
Automatic
Maintenance
Set the time to automatically restart the system and
automatically delete files.
Reset
Default
Restore settings status: normal settings, encoding settings,
recording settings, alarm settings, network settings, network
services, output mode, serial port settings, user
management
System
Updating
Upgrade with an external device such as USB
Device Info
Set some hardware information of device
Input/Output
Export the log information or configuration of the device to an
external device (such as a USB flash drive); import the
configuration of the external device (such as a USB flash
drive) to the device.
System info
Storage Info
Display hard disk capacity and recording time
Stream
Statistics
Display stream information
Log Info
Clear all log information based on log recording and time
query log
Version Info
Display version information
Close
System
Perform logout, shutdown, and restart functions
Non-English users, please select your language from the drop-down menu.
Path: System - General - Language
Questo manuale è adatto per i seguenti modelli
14
Indice
Altri manuali Seculink Registratore digitale
