Securesight VL1 Manuale utente
VL1
User’s Manual
Version 1.5 Sept 07
© Securesight 2007 E&OE 2
Manual Contents:
A. Camera kit contents 3
B. VL1 overview 4
C. Definition 6
D. Mounting the camera 13
E. Camera setup – Getting started 14
F. Setting the MODE of your VL1 22
G. Driver and Ulead Photo Explorer installation 27
H. Viewing images via PC or digital camera 28
I. Web Cam Mode 30
J. Web Cam software and enhanced security 32
K. Technical Specifications 33
L. General information and safety 36
M. CE and ROHS compliance 37
© Securesight 2007 E&OE 3
A. Camera kit contents
•Model VL1 Lighting Camera
•512Mb SD card
•USB lead
•Ulead Photo Explorer software and camera driver CD
•User Manual
© Securesight 2007 E&OE 4
B. VL1 overview
1. Front view
© Securesight 2007 E&OE 5
2. Base view
© Securesight 2007 E&OE 6
C. Definitions
1. Definitions of Front view parts.
•Flood light screw: Used to open or close the flood light case
to replace the halogen lamp.
•Flood light cover: Open to replace lamp
•Floodlight:
•Halogen lamp: For lighting purpose, please use the correct
voltage and wattage of halogen light for this product.
Halogen lamp R7S, Max power: 500W.
•Bracket: For mounting the VL1.
•AC cable outlet: For connecting the externalAC cable to
VL1.
•Cam Lens: This is the digital camera lens. Use a soft cloth
to clear if necessary,
•PIR lens: Passive Infrared movement sensor.
•TEST Indicator: A red indicator behind the PIR lens which
lights when testing the PIR coverage area and flashes
during the arming count down time.
© Securesight 2007 E&OE 7
2. Definition of Base view parts.
•Time control knob: For adjusting the time that the halogen
floodlight will stay on for.
•Lux control knob: For adjusting the ambient lighting level at
which the floodlight will come on automatically.
•USB socket: For connecting the VL1 to a PC with the USB
lead provided.
•SD slot: For inserting a SD memory card. Ensure card
firmly pushed in. Press again to release and remove.
•Control display: Icon display showing settings. Refer to
later in this manual for details.
•SET button: To adjust the settings on your VL1.
•MODE button: To change the mode of your VL1.
© Securesight 2007 E&OE 8
3. Definition of Control display.
© Securesight 2007 E&OE 9
•: Still image capture icon. Indicates your VL1 will
capture a single image.
•: 2 Photos burst capture icon. Indicates your VL1
will capture two consecutive images.
•: Image counter to show how many images or
videos have been captured.
•: Storage status icon. Only present if an external SD
card installed. If no icon your VL1 will use its internal built
memory.
•: Video-capturing icon. Indicates your VL1 is in video
capturing mode and will capture 10 second video bursts.
•: High-resolution icon. Indicates the VL1 is in high-
resolution still image capturing mode.
© Securesight 2007 E&OE 10
•: Low-resolution icon. Indicates the VL1 is in low-
resolution still image capturing mode.
•D: Date setting mode. Indicates when your VL1 is in Date
setting mode.
•T: Time setting mode. Indicates when your VL1 is in Time
setting mode.
•: Rubbish bin icon, Indicates the VL1 is in delete mode.
•: Floodlight control icon,
When showing, the floodlight will turn on if the camera sensor
detects the light levels are too low.
When the Icon is not showing the floodlight is turned on when
the photo sensor detects the light level has dropped below the
threshold set with the LUX control.
•: Shows the Date and time.
•: Pressing the SET button will exit the current mode.
Altri manuali per VL1
1
Indice
