Securiturk WT-M-1602-30SF Manuale utente

WT-M-1602-30SF! ! /1 4
Short introduction
!
Unlocked indicator light!
Low battery Indicator!
!
Installation
SECURITURK
Document No: S20202K00020
www.securiturk.com!
www.elektronik-guvenlik.com
Technical Parameters
Fingerprint Device
Semiconductor fingerprint reader
Standby Current
20µA
Management Fingerprint
2
Working Current
30mA
User Fingerprint
8
Working Temperature
-20 ~ +55℃
Power Supply
CR2450
Working Humidity
10% ~85%
Batteries Life Time
1 Year
Storage Temperature
-40 ~ +55℃
⚠Please note that outdated production of the battery you use may affect the default battery life.
Battery box
Works with
CR2450 battery.
USB Interface
Model:M1602SF
Fingerprint Sensor
WT-M-1602-30SF has a structure that allows the
lock body to be turned after fingerprint is scanned.
The unlock light turns on after a fingerprint
authorized to open has been scanned. You can
open the lock body by turning it within 3 seconds.
If you don't turn the lock body within 3 seconds, it
will lock again. When the lock body is turned to the
locked position while it is open, it is automatically
locked.”

WT-M-1602-30SF! ! /2 4
How to use
WT-M-1602-30SF comes from the factory with no fingerprints identified. After inserting the battery, it will
unlock for each finger you read. Once a fingerprint is recognized, other fingerprints cannot unlock.!
You must set up an administrator fingerprint before using it. Ten fingerprints, two of which are administrators,
can be assigned to the lock. If you will not authorize someone else, you can use it with only 1 administrator
fingerprint. However, it is recommended that you introduce at least 2 fingerprints to avoid adverse situations.!
The administrator fingerprint is authorized to identify and delete other fingerprints.!
How to set fingerprint
1.How to add the management fingerprint!
1.1. When the fingerprint database is empty, put the finger on the lock for about Is, you will hear a long
beep sound with green unlocked indicator light on; again put the management fingerprint on the
lock for about 3s, you will hear a long beep sound with unlocked indicator light flash, now you are
ready to add user fingerprint.!
1.2. To put the management fingerprint on the lock for 4 times, you will hear a short beep sound
means inputting fingerprint succeed, if you hear two short beep sound, means failed. Then
change position of fingerprint and press 4times success fully, a long beep sound alarm, means
means setting management fingerprint succeed. (2 at most) Fingerprint can be added 10 at most,
the first2 as management fingerprint, the rest 8 as user fingerprint.!
⚠Management fingerprint have add and delete user fingerprint function. Please place your finger on the
reader at the same angle each time. Since changing the direction of the finger will cause failure to match, the
fingerprint set process may not be performed.!
2. How to add the user fingerprint!
2.1. Put the management fingerprint on the lock for about Is, you will hear a long beep sound with
unlocked indicator light on.!
2.2. Again put the management fingerprint on the lock for about Is, you will hear along beep sound
with unlocked indicator light flash. Now you are ready to add user fingerprint.!
2.3. To put the user fingerprint on the lock for 4 times, you will hear a short beep sound means
management fingerprint setting succeed, if you hear two short beep sound, means failed. Then
change position of fingerprint and press 4 times, a long beep sound alarm, means succeed. (8 at
most).!
⚠The user fingerprint can be added after 2 management fingerprints added. Stored fingerprints are not
delete even if you remove the battery. So don't forget which finger is the manager.!
SECURITURK
Document No: S20202K00020
www.securiturk.com!
www.elektronik-guvenlik.com

WT-M-1602-30SF! ! /3 4
3. Delete fingerprint!
3.1. Delete All Fingerprints
3.1.1.Scan the administrator fingerprint 2 times with 1 second intervals. The green unlock light
will start flashing. When you get the same finger scanned 1 more time, you will hear a
long beep and the red low battery light will flash. Have your finger scan the reader for the
4th time and do not take your finger offthe reader for 3 seconds. You will hear a long
beep and the red low battery light will stop flashing and all fingerprints stored in memory
will be erased.!
⚠Remember that when all fingerprints in the memory are erased, every finger you scan will unlock.
3.2. How to delete only users fingerprints
3.2.1.Scan the administrator fingerprint 2 times with 1 second intervals. The green unlock light
will start flashing. When you get the same finger scanned 1 more time, you will hear a
long beep and the red low battery light will flash. When the red low battery light flashes
complete, all user fingerprints have been deleted.!
3.2.2.This action does not delete administrator fingerprints.!
Remember that every finger you scan will unlock when all stored fingerprints are erased.
Usage
4.Lock & Unlock!
4.1. Unlock!
•To verify your fingerprint on lock for about 1 second.!
•Buzzer gives out a long beep sound, the unlocking indicator lights is on.Turn the knob clockwise within
3s to open the lock.!
⚠If you don't touch your finger the way you used it to recognize it, you will hear 2 short beeps in
succession and it won't unlock. Re-read it as you put your finger in the recognization.
⚠If the battery is running out of energy, the low battery light turns on during unlocking. In this case,
you must replace the battery. If the low battery indicator is lit, you are not allowed to identify or delete
fingerprints. Because if the process is interrupted during the recognition, you cannot reset the lock.
In order to unlock a lock with a completely depleted battery, you can change the battery, connect a
power bank or an adapter with Micro USB output to the Micro USB port at the bottom of the lock to
unlock it. Remember, fingerprints will not be erased even if the battery runs out.
4.2. Lock!
$Rotate counter clockwise the knob to lock.!
SECURITURK
Document No: S20202K00020
www.securiturk.com!
www.elektronik-guvenlik.com
Altri manuali Securiturk Serratura






















