Security-Center TV7210 Manuale utente

Network camera

Installation instructions

TV7210

TV7217

Preface

Dear Customer,

Thank you for purchasing this Network camera of the DIGI-LAN series from Security Center. You made the right

decision in choosing this state-of-the-art technology,

which complies with the current standards of domestic and European regulations. The CE has been proven and all

related certifications are available from the manufacturer upon request.

To maintain this status and to guarantee safe operation, it is your obligation to observe these operating instructions!

In the event of questions, please contact your local specialist dealer.

This Network camera is used for object surveillance. The recorded video signals are transmitted to a computer

digitally via the connected network. The computer software permits simultaneous recording of up to 16 connected

video signals. Data storage is subject to local national data-protection guidelines. Via the Internet Explorer, you

have worldwide access to installed cameras (password-protected).

Precautions

The Network camera and connected components must be kept free of moisture (cellars and similar surroundings

are to be strictly avoided). Use of this product for other than the described purpose may lead to damage of the

product. Other hazards such as short-circuiting, fire, electric shock, etc., are also possible. The equipment is

designed for operation using a Class 2 12V DC transformer. No part of the product may be changed or modified

in any way. Connection to the public power network is subject to country-specific regulations. Please be aware of

applicable regulations in advance.

To avoid fire and injury, please observe the

following:

Securely fasten the device at a dry location in the

building.

Ensure sufficient air circulation.

Do not expose the device to temperatures less than

0°C or more than 35°C.

The device is designed for indoor use only.

Humidity must not exceed 85% (non-condensed).

Ensure that the voltage is disconnected when

performing work on the device.

Please observe the following regulations to ensure

trouble-free operation of your device.

The Network camera is supplied by a 12V DC

transformer.

The transformer should be connected to the 230V

AC building mains by means of a separate,

electrically protected line.

Connection work to the building mains is subject

to country-specific regulations.

General:

Improper or careless installation work may lead to faults and poor image quality. Therefore please read the

instructions very carefully and follow the installation instructions for lines and components precisely.

The manufacturer reserves the right to make technical modifications at any time.

Before using this product

The use of surveillance equipment may be forbidden by law in some countries. This Network camera is not only

high-quality web camera but can also be used as part of a flexible surveillance system. Before using this equipment,

make sure that all your surveillance activities are completely legal.

Before installation, check the product for completeness (page 5: Scope of delivery). Read the installation instructions

before installing the Network camera. Read the “Installation” chapter carefully and follow the instructions contained

in it to avoid damage caused by faulty assembly or incorrect installation. This will ensure that the equipment goes

into operation correctly for the intended purpose.

Appendixes A and B (Troubleshooting, FAQ) contain possible solutions to problems occurring during installation

and configuration.

The installation instructions describe different usage scenarios of the Network camera. The chapter “URL

Commands of the Network camera” is intended to help professional users design their own homepage or integrate

the camera with web servers.

Sections marked with contain special hints and advice for the user. Ignoring this advice can result

in damage to the equipment or injury.

Contents

Preface ........................................................................................................................................................2

Precautions ..................................................................................................................................................2

General: .............................................................................................................................................2

Before using this product ...............................................................................................................................3

Contents ......................................................................................................................................................4

Scope of delivery ..........................................................................................................................................6

Hardware installation ....................................................................................................................................7

Installation in Ethernet.......................................................................................................................7

Installation in Wireless LAN...............................................................................................................7

First access to Network camera......................................................................................................................9

Setting the IP address ........................................................................................................................9

Note: ................................................................................................................................................10

Access to the network camera via the Internet Explorer...................................................................................14

Defining a password to prevent unauthorised access .............................................................................14

Changing the administrator password ............................................................................................15

Installing the plug-in .......................................................................................................................16

Basic user functions ....................................................................................................................................17

Main window and camera view.......................................................................................................17

Configuration ....................................................................................................................................18

Camera view .....................................................................................................................................18

Client settings ....................................................................................................................................19

Administrator settings ..................................................................................................................................21

Configuration / video ......................................................................................................................21

Protecting the Network camera with a password ............................................................................22

Root password ......................................................................................................................22

Opening accounts for new users.............................................................................................22

More flexible options for the viewer .........................................................................................23

Format of a multimedia website......................................................................................................23

Demo on two or more pages – medium-scale service................................................................23

Product demo for e-Business – large-scale service.....................................................................23

If the website has an FTP service .............................................................................................23

If no FTP service is available in the web ...................................................................................25

Alarm inputs/outputs ..........................................................................................................................25

Time-controlled surveillance................................................................................................................26

Integrated video sensor.......................................................................................................................27

Updating the software version .............................................................................................................28

System configuration...................................................................................................................................29

System .............................................................................................................................................30

Security............................................................................................................................................30

Network...........................................................................................................................................31

WLAN configuration ........................................................................................................................32

DDNS and UPnP settings.................................................................................................................34

Mail & FTP........................................................................................................................................35

Video ...............................................................................................................................................37

Picture settings ......................................................................................................................38

Camera settings ....................................................................................................................38

Day/Night function (only TV7216 and TV7217) .......................................................................38

Audio...............................................................................................................................................39

Motion sensor..................................................................................................................................40

Application ......................................................................................................................................41

Viewing System log..........................................................................................................................42

Viewing System Parameters.............................................................................................................42

Factory default.................................................................................................................................42

Appendix ...................................................................................................................................................43

A. Troubleshooting ..........................................................................................................................43

B. Frequently asked questions (FAQ)...............................................................................................44

C. URL commands of the security network camera .........................................................................46

D. Technical specifications...............................................................................................................61

Scope of delivery

Network camera

Lens

Antennas (only TV7211,

TV7213, TV7215, TV7217)

Transformer

Camera mount

Software CD

Installation instructions (on CD)

Hardware installation

When the camera is switched on, it runs a self-test, and the Power/Activity LEDs flashes blue and red. If this self-test

completes successfully, the LED flashes blue and the Network camera is ready for you to enter an IP address. After

you enter an IP address, the blue LED flashes once every second. If the self-test is not successful, the red LED flashes

several times. For troubleshooting hints, see Appendix A.

The network camera will first detect Ethernet. If it does not connect to Ethernet, the network camera will try WLAN.

During the searching and connecting process to the wireless access point or station, the LED of the network camera

will keep red. Until the network camera is connected to the other wireless device, the LED wil become blue and

flash. Operating in either network mode, the blue LED will flash every second as heartbeat to indicate alive.

Installation in Ethernet

Make sure the Ethernet is firmly connected to a switch. After attaching the Ethernet cable please plug in the power

adapter. If the LED turns off the be steady blue after self test, you can go to software installation. If the Ethernet is

not available, the network camera will switch to wireless LAN mode.

Installation in Wireless LAN

If the Ethernet is not available while power on, the network camera will search for any access point with SSID

“default”. Once an access point is found, the LED will turn green to wait for installation. If the network camera

environment cannot meet the default settings, install the network camera in Ethernet to proceed with wireless LAN

configuration.

Make sure that all accessories and articles

listed above are present in the scope of

delivery. Depending on application, an

Ethernet cable may be required. This

Ethernet cable must meet the specifications

of UTP Category 5 (CAT 5) and must not

be longer than 100 meters.

To prevent the risk of electric

shock, first connect the socket of the

transformer to the security network

camera before inserting the

transformer into the mains socket.

you

dea

e co

dev

ces.

The Network camera is equipped via an I/O terminal block with a digital input and a relay for device control. At Pin

3 and Pin 4, an external digital input signal can be processed, whereby the voltage state is monitored in the start

phase at LOW. The output (Pin 1and Pin 2) can be used for switching external devices on and off.

1 RELA

OUTPUT (output status open)

2 RELAY OUTPUT (max. 1A, 24V DC)

3 DI+ INPUT (max. 50mA, 12V DC

4 DI- INPUT (output status of DI is low)

First access to Network camera

Setting the IP address

To set the IP address of the camera:

Use a network cable to connect the Network camera to your computer network.

(The simplest way is to connect the Network camera direct to your PC using a cross-link cable.)

If your PC is not yet integrated into a network, you first have to configure it for the network application. Do this by

opening the Properties page for your network.

(This also applies if the camera is connected to the PC via a hub or switch.)

1. Click , select and open the Properties page of the

2. Enter a fixed IP address and subnet mask

(e.g.: 192.168.0.80 and as subnet mask 255.255.255.0).

- The network connection of your PC is now configured.

3. Now start the Installation Wizard from the software CD supplied.

4. Follow the installation instructions of the Installation Wizard.

5. If installation is successful, start the program under Programs/Installation Wizard.

6. Following the program start, the Installation Wizard automatically searches for a connected network

camera.

7. If no camera is found in the first search, click “Search” for a new search.

Note:

The IP addresses shown in the “Current IP Address” field reflect those on the local network. They may be from the

DHCP server. If there is no DHCP server, the camera will try to find a free IP address (this takes from 15 seconds to

3 minutes, depending on the LAN status). The method of finding an IP address is seeking from 192.168.0.99, to

192.168.0.254. If any of the address inside this range is free, the network camera will be assigned to this IP

address, and its subnet mask would be 255.255.255.0. If none of the addresses is free, the network camera will try

the range from 192.168.0.2 to 192.168.0.98. After an IP address is assigned to the camera, the “Activity” status

LED blinks.

Note: If no camera is found via the manual search, change the network settings of your PC as described in the

instructions.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Security-Center Telecamera di sicurezza

Security-Center

Security-Center TV7099 Manuale utente

Security-Center

Security-Center TV7203 Manuale utente

Security-Center

Security-Center TV7218 Manuale utente

Security-Center

Security-Center TV7040 Manuale utente

Security-Center

Security-Center TV7320 Manuale utente

Security-Center

Security-Center TV7014 Manuale utente

Security-Center

Security-Center TV7000 Manuale utente

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente