Security Labs Best Picture Quality - JPEG2000 Manuale utente
VER1.2
8Channel Stand-alone DVMR
VER1.2
User’sManual VER1.6
1
Installation & Safeguards
INSTALLATION & SAFEGUARDS
All the safety and operating instructions should be read before the unit is operated.
Environment Condition for Installation
- To prevent electric shock or other hazard, do not expose units to rain, moisture, or dust.
- This unit should be located in an area with low humidity and a minimum of dust..
- Place this unit in a well-ventilated place and do not place heat-generating objects on this unit.
- This unit should not be located in an area where it is likely to be subjected to mechanical shocks.
Before You Start
- Ensure the power switch is in the OFF position prior to starting.
- Do not attempt to service this unit yourself as opening or removing covers may expose you to
dangerous voltage or other hazards.
- Installation should be performed by qualified service personnel only.
- This unit should be operated only from the type of power source indicated on the manufacturer’s
label and with the power supply included with the unit.
Notice
- Be aware thoroughly about the power connection before installation of the unit.
(Please read Instruction for DC Power Adapter which is included in the package)
- Before initial configuration or operation you must first set the TIME/DATE, followed by setting
the unit to the FACTORY DEFAULT settings, lastly clearing the HDD. Please follow these
steps in order.
- Before installing a second HDD, ensure that the drive conforms to the specifications listed on
the specifications page at the end of this manual. When installing a second HDD, set the drive
to SLAVE. After installation, first reset the TIME/DATE, followed by resetting the unit to the
FACTORY DEFAULT settings, lastly clearing the new HDD.
- Pull the unit out of record mode prior to cutting power to the unit. Do this by entering the setup
menu, followed by switching the unit off. Powering off the unit while writing to the disks can
cause critical malfunctions. (ex: Recording Error, Playback Error, System Error)
- When you set the record type, you have to set the Record Configuration and also Schedule
Setup. This unit records as per the Record type & Schedule setup.
- The [REC] button on the front panel is for emergency record using highest image quality.
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the
user of this equipment that there are dangerous voltages within the enclosure which may be of
sufficient magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to alert the user to presence of
important operating and maintenance(Servicing) instructions in the literature accompanying the
appliance.
2
Contents
Contents
CHAP. 1 Features & Package Contents ---------------------------------------------------------------- 4
1-1. Features ---------------------------------------------------------------- 4
1-2. Package Contents ---------------------------------------------------------------- 5
CHAP. 2 Function of Each Button ---------------------------------------------------------------- 6
2-1. Front ---------------------------------------------------------------- 6
2-2. Rear ---------------------------------------------------------------- 8
CHAP. 3 Installation ---------------------------------------------------------------- 9
3-1. Installation Configuration ---------------------------------------------------------------- 9
3-2. Detailed Installation ---------------------------------------------------------------- 10
1) Rack Mount ---------------------------------------------------------------- 10
2) ----------------------------------------------------------------
3) Camera ---------------------------------------------------------------- 11
4) Monitor ---------------------------------------------------------------- 11
5) Power ---------------------------------------------------------------- 11
6) VCR, Video Printer ---------------------------------------------------------------- 12
7) Other External Device ---------------------------------------------------------------- 12
CHAP. 4 Operation ---------------------------------------------------------------- 13
4-1. System Log-in ---------------------------------------------------------------- 13
4-2. Factory Default ---------------------------------------------------------------- 13
4-3. Display Configuration ---------------------------------------------------------------- 14
4) Freeze View ---------------------------------------------------------------- 15
5) Zoom View ---------------------------------------------------------------- 15
4-5. Record ---------------------------------------------------------------- 16
4-6. Playback ---------------------------------------------------------------- 16
4-8. PTZ Camera Operation ---------------------------------------------------------------- 18
4-9. Data Back-Up ---------------------------------------------------------------- 18
4-4. Live View Setup ---------------------------------------------------------------- 14
1) Full / Multiple View ---------------------------------------------------------------- 14
2) Sequencing Cameras ---------------------------------------------------------------- 15
3) PIP View ---------------------------------------------------------------- 15
4-7. Search ---------------------------------------------------------------- 17
3
Contents
CHAP. 5 Set Up ---------------------------------------------------------------- 19
5-1. Entering the Menu ---------------------------------------------------------------- 19
5-2. Display Setup ---------------------------------------------------------------- 20
1) Screen Display ---------------------------------------------------------------- 20
2) Monitor Setup ---------------------------------------------------------------- 20
5-3. Configuration ---------------------------------------------------------------- 21
1) HDD Management ---------------------------------------------------------------- 21
2) TIME/DATE Setup ---------------------------------------------------------------- 22
3) Camera Setup ---------------------------------------------------------------- 22
4) Interval Setup ---------------------------------------------------------------- 24
5) Alarm Setup ---------------------------------------------------------------- 24
6) Event Popup Setup ---------------------------------------------------------------- 24
7) Buzzer Setup ---------------------------------------------------------------- 25
6-4. FAQ ---------------------------------------------------------------- 46
8) Password Setup ---------------------------------------------------------------- 25
9) System Information ---------------------------------------------------------------- 25
6-3. Back-Up CD Player ---------------------------------------------------------------- 44
7-2 RS232 ASCII-CODE ---------------------------------------------------------------- 49
CHAP.8 Specification ---------------------------------------------------------------- 51
5-4. Record Setup ---------------------------------------------------------------- 26
1) Record Configuration ---------------------------------------------------------------- 26
2) Schedule Setup ---------------------------------------------------------------- 27
3) Holiday Setup ---------------------------------------------------------------- 27
5-5. Back-Up ---------------------------------------------------------------- 28
5-6. External Device ---------------------------------------------------------------- 28
1) TCP/IP Setup ---------------------------------------------------------------- 28
2) RS-232C Setup ---------------------------------------------------------------- 29
6-1. DVR Network Configuration ---------------------------------------------------------------- 31
6-2. Remote Viewer Program ---------------------------------------------------------------- 38
CHAP. 7 Programmers Reference ---------------------------------------------------------------- 49
3) Pan Tilt Zoom Setup ---------------------------------------------------------------- 29
5-7. Factory Default ---------------------------------------------------------------- 30
5-8. Language Setup ---------------------------------------------------------------- 30
CHAP. 6 Network Setup ---------------------------------------------------------------- 31
7-1 Connector Pin Assignment ---------------------------------------------------------------- 49
4
CHAP. 1 Features & Package Contents
CHAP. 1 Features & Package Contents
Live View
Real time display per camera
Auto Sequence
PIP (Picture in picture)
Event Popup
Digital Zoom
Display Freeze
Simple Playback mode
Simple PTZ camera control
Record
Variable Record resolution (For higher picture quality or higher recording speed)
Efficient Image Quality setup in 5 steps
Schedule Record / Holiday Record
Event Record (Alarm / Motion)
Emergency Record
Network
View Live and Playback images across IP network
Copy images across the network
Playback
Search & Playback by Date/Time, Event and Camera
Outstanding picture quality by JPEG 2000 compression algorithm (No mosaic effect)
Suitable for recording not only images but also text
Various steps in Forward Playback Speed (X1/16, X1/8, X1/4, X1/2, X2, X4, X16, X32, X64)
Various steps in Backward Playback Speed (X1/16, X1/8, X1/4, X1/2, X2, X4, X16, X32, X64)
Easy and convenient search by Jog Shuttle & Remote Controller
Data Back-Up
Simple Back-Up using built-in CD Writer (Back-up CD Player included in the package)
Network Back-Up using Remote Viewer program(Remote Viewer included in the package)
Supports bigger capacity of HDD (300GB or bigger)
Others
Multi-Language (English, Spanish, Portuguese, German, French etc.,)
VGA option board supports both TFT LCD monitor and CRT monitor
Lock the system by Password
JOG / SHUTTLE
PAL/NTSC Auto detection
Control the unit by using Remote Controller
1-1. Features
5
CHAP. 1 Features & Package Contents
1-2. Package Contents
1. DVR Main Unit 2. Remote Controller
3. Power Cable 6. Software CD
4. Power Adapter 5. User’s Manual
7. Rubber Pad 8. HDD absorber 9. Battery for remote controller 10. Bolts
Package Contents Description
1. DVR Main Unit STAND-ALONE DIGITAL VIDEO RECORDER
2. Remote Controller DVR control
3. Power Cable AC power supply to adapters for 12 V DC power
4. Power Adapter 12 V DC power supply
5. User’s Manual User’s Manual
6. Software CD Remote Viewer Software & Back up CD player
7. Rubber Pad Prevent DVR from slipping. Attach it to the bottom of main unit
8. HDD absorber Absorbing the mechanical shock of HDD against the case bottom
9. Battery Battery for remote controller
Rack mount bracket
For fixing Rack Mount bracket to DVR (6ea)
For fixing DVR with Rack Mount bracket to 19” Rack (4ea)
For fixing Hard Disk Drive into DVR (8ea)
10. Rack mount
bracket / Bolts
6
CHAP. 2 Function of Each Button
Name Function
①LED Lamps Shows status of operation
②USB Device Firmware upgrade by connecting PC with latest firmware to USB port
③IR IR receiver
1. Pressing this button will display a full screen image of that camera
2. Control PTZ camera (Each button is assigned for each PTZ command)
• ON : LIGHT ON • SET : SET PRESET
• OFF : LIGHT OFF • CLEAR : CLEAR PRESET
• GOTO : GOTO PRESET
• AUTO : AUTO SCAN
• F1 : USER 1
• F2 : USER 2
• F3 : USER 3
• F4 : USER 4
Emergency Record at continuous, 120ips, SUPER FINE size
Stop of Emergency Record and return to Schedule Record
from Emergency Record. Playback stop.
Playback of recorded data on HDD
Search recorded data on HDD
Set up for SYSTEM MENU or Use to exit the menu
Press MENU button before powering off the unit.
Selects each menu option
Move to next step
Navigate in the menu
Reduce or increase the option value in the menu
• OPEN : IRIS OPEN
• CLOSE: IRIS CLOSE
• NEAR : FOCUS NEAR
• FAR : FOCUS FAR
• WIDE : ZOOM IN
• TELE : ZOOM OUT
REC
STOP
PLAY
SEARCH
MENU
ENTER
⑥SETUP
NEXT
▲▼◀▶
+ -
⑤Record /
Playback
④Camera
selection
&
PTZ camera
control
2-1 FRONT
CHAP. 2 Function of Each Button
7
CHAP. 2 Function of Each Button
Name Function
PTZ On/Off for PAN/TILT/ZOOM control mode
Press this button first to control PTZ camera connected to
DVR unit via RS-485
ZOOM Zooming an image
Freezing an image
Switch to split display
MODE button changes screen-division from (to) full screen
to (from) 8 split screen.
Display in PIP (Picture in Picture) mode
Auto camera image sequencing in full screen mode
Lock the key function.
To unlock, press longer time (for several seconds) and then
input the password.
Press Q. Play button while you see live display, and
playback starts from the end of data in reverse direction
Pressing Jog Shuttle button (Ready for use Jog/Shuttle)
: In playback mode, pressing J/SHUTTLE button make
images frozen.
RUN LED on : While you operate Jog or Shuttle
⑧Jog Shuttle
Control
ACTIVE LED on : When J/Shuttle button is pressed
⑨Jog Shuttle
⑩CD-RW
Very easy and convenient search : Press J/Shuttle button, and images in
playback pause, and then Jog and Shuttle makes it very easy and convenient
to search, forward or backward, fast and slow, as user want.
FRZ
MODE
PIP
SEQ
K.LOCK
Q. Play
(Quick Play)
J/SHUTTLE
Data Back-up and Firmware Upgrade using built-in CD writer
⑦LIVE View
Control
8
CHAP. 2 Function of Each Button
2-2. REAR
Name Function
RS 485 Connection with PTZ Camera or other external device using RS 485
interface
1
2
3
4
5
6
7
8
9
10
SENSOR Input
VGA
ETHERNET
RS-232C
CAMERA Input
LOOP Output
MONITOR
Output
RELAY Output Relay out terminal
Sensor input terminal
Connection to VGA Monitor (CRT type or TFT LCD monitor)
Just in case you purchased DVR with VGA option board fixed on the main
board of DVR, you can connect VGA Monitor to DVR unit.
Connection to ETHERNET device
Connection to external device as PC using RS-232C to control the DVR
Connection with camera
Camera loop out
Connection with Composite Monitor
VCR Output Connection with VCR for analog backup
DC Power
POWER
SWITCH
DC 12V 8.3 A Adaptor (Refer to the Instruction for adapter by HDDs
capacity)
Power ON/OFF switch for adapters
To avoid accidental deletion of HDD data, please make sure to press
MENU button before powering off the unit.
This takes the unit out of record mode for safe shutdown.
9
CHAP. 3 Installation
CHAP.3 Installation
3-1. Installation Configuration
Indice
Altri manuali Security Labs Registratore digitale
Security Labs
Security Labs SL720 Manuale utente
Security Labs
Security Labs SLD274 Manuale utente
Security Labs
Security Labs SLD251 Manuale utente
Security Labs
Security Labs SLD240 Manuale utente
Security Labs
Security Labs SLD250 Manuale utente
Security Labs
Security Labs SLD230M Manuale utente
Security Labs
Security Labs SLD310 Manuale utente
Security Labs
Security Labs SLD261 Manuale utente
Security Labs
Security Labs SLD 245 Manuale utente
Security Labs
Security Labs 960H Series Manuale utente
