Security Solutions, Inc. VPTZ-100 Manuale utente

Notes on Safety

◎Please read the instructions & quick setting guide thoroughly

before installing or operating the unit.

◎Please do not mount the machine on an unstable surface or

bracket.

◎Please prevent liquids or other material from entering the

dome housing.

◎When connecting the power source, please follow all

electrical safety standards and procedures. Use only the power

supply designed for this device. The speed dome’s RS-485 and

video signal uses TVS technology to protect it from strong

electrical surges. This technology prevents damage to the

device resulting from impulse signals such as lightning strikes

or surges of power. Allow for enough distance between the

RS-485 and video signals and high-voltage equipment or

cables during the transmission process. Please do not power

the unit until all connections are secure and installation is

complete.

◎Avoid shooting very bright objects directly into the camera’s

CCD (such as the sun or light fittings).

◎When the machine is not operating properly, please refer to

the instructions for information about how to service or repair

your speed dome.

◎Please protect the unit against extremes of vibration,

pressure or dampness while transporting unit. Damage can

occur from improperly packaging the unit while shipping.

◎The outdoor dome camera system is designed to be installed

in outdoor environments only.

INDEX

Ⅰ. INTRODUCTION………………………………………………………….…..1

Ⅱ.TECHNICAL DATA…………………………………………………………...1

Ⅲ. SETTINGS……………………………………………………………….…….2

3.1 XTS-SO10XDN-WP DOME ADDRESS,TRANSMISSION SPEED,PROTOCOL

SETTING .................................................................................................................3

3.1.1 SPEED DOME CAMERA COMMUNICATION ADDRESS SETTING ....................4

3.1.2 SPEED DOME CAMERA COMMUNICATION PROTOCOL SETTING..................4

3.1.3 SPEED DOME CAMERA TRANSMISSION SPEED SETTING (BAUD RATE

SETTING)................................................................................................................5

3.1.4 RS-485 BUS MATCHING RESISTANCE ......................................................6

3.2 XTS-SO10XDN-IND DOME ADDRESS,TRANSMISSION SPEED,

PROTOCOL SETTING ..............................................................................................6

3.2.1 SPEED DOME CAMERA COMMUNICATION ADDRESS SETTING ....................7

3.2.2 SPEED DOME CAMERA COMMUNICATION PROTOCOL SETTING..................8

3.2.3 SPEED DOME CAMERA TRANSMISSION SPEED SETTING (BAUD RATE

SETTING)................................................................................................................8

3.2.4 RS-485 BUS MATCHING RESISTANCE ......................................................9

IV. BASIC FUNCTION OF DOME CAMERA…………………………………10

4.1 OBJECTIVE TRACKING ...................................................................................10

4.2 PRESET POSITION SETTING /ADJUSTING *...................................................10

4.3 DOME PATTERN TOURS *...............................................................................10

4.3.1 Preset Position Parameter Setting....................................................10

4.3.2 Pattern Tours Setting.......................................................................... 11

4.4 AUTO SCANNING............................................................................................11

4.4.1 Point A to B Scanning...................................................................... 11

4.4.2 360° Scanning *................................................................................ 11

4.5 AUTO-FLIP .....................................................................................................11

4.6.1 Focus Change...................................................................................... 11

4.6.2 Focus Control....................................................................................... 11

4.6.3 Iris Control............................................................................................12

4.7 MEMORY FUNCTION AS POWER OFF ............................................................12

4.8 AUTO-REPOSITION .........................................................................................12

V. CAMERA MENU (OSD MENU) SETTING…………………………………13

5.1 SYSTEM INFORMATION ..................................................................................13

5.2 SPEED DOME OSD SETTING WITH CONTROL KEYBOARD ...........................14

VI. CAMERA OPTIONAL FUNCTIONS……………………………………….24

6.1 ALARM LINKAGE FUNCTION ...........................................................................24

6.2 PRESENT POSITION CHAR OVERLAP FUNCTION ..........................................24

VII. PROTOCOL ORDER……………………………………………………….24

VIII. ADDRESS-BINARY CODE CHART……………………………………..27

IX. EXCEPTION HANDLING……………………………………………….....36

------------------------------------------------------------------------------------------------

* indicates the functions with default protocol, it might not function

by using other protocols.

# indicates the optional functions, only with certain models

. IntroductionⅠ

Congratulations on purchasing our speed dome, an intelligent,

high-speed dome with a high-performance DSP camera and

sophisticated zoom lens. It is an advanced technological

surveillance product combining an all-direction variable speed

dome and digital decoder all in one unit. It can aim quickly and

scan continuously, making omni-directional and non-blind-spot

monitoring into reality. Additionally, it can quickly adapt to changing

environments with its 18x optical and 12x digital zoom with precise

stepping motors. The advanced stepping motor technologies

enable the dome to rotate smoothly, respond sensitively and aim

precisely. The speed dome camera has a memory function so

when the power cuts off it can auto resume to previous working

status. Use our high-performance speed dome “When it Counts.”

All of the features make the intelligent high-speed dome camera fit

for a wide range of applications such as intelligent building, bank,

street of city, airport, station etc..

.ⅡTechnical Data

Technical Parameters of the Intelligent High-speed

Dome

----------------------------------------------------------------------------------------------

* indicates the functions with default protocol, it might not function

by using other protocols.

# indicates the optional functions, only with certain models.

Ⅲ. Settings

The setting of XTS-SO10XDN-WP and XTS-SO10XDN-IND is partly

different, 3.1 corresponds to the setting of VT-SP100W, 3.2 corresponds to the

Model Outdoor

Day/Night Speed Dome

Indoor

Speed Dome

Power Supply AC24V±4V

Operating temperature - 40 ~+60℃℃ 0~+40℃℃

Operating moisture ≤95%

Power consumption ≤20W

Communication RS-485 bus

Communication transmission speed 1200bps / 2400bps / 4800bps / 9600bps

Horizontal rotation speed 0.1° - 280°/s (1-64 grade shift gears)

Horizontal rotation range 360°

Tilt rotation range 90°

Auto flip 2 grades (Horizontal 180° for 1st grade, Vertical 90° for 2nd grade)

Auto zoom speed control Control speed auto-adjusted according to zoom length changing

A-B points scan * Can set freely

A-B points scan speed * 1- 64 grade available

Dwell time at preset position * 1 - 60s available

Preset Positions * 128 pcs

Running to preset speed * 1 - 64 grade available

Cruise Tour * 8 group

Cruise Points Qty per cruise group * 16 preset positions

Pattern * 1 pc

Pattern Memory Time * 88 Seconds

Privacy Zone * 2

Fan & Heater # Temperature auto-controlled

setting of VT-100K.

3.1 XTS-SO10XDN-WP Dome Address, Transmission

Speed, Protocol Setting

Before the dome is installed, the communication protocol, baud

rate and dome address, should be confirmed. Set the code switch,

keeping the setting consistent with the control system. The relative

code switch site and connecting wires are diagramed below for

reference.

3.1.1 Speed Dome Camera Communication Address

Setting

The communication address code for the speed dome should be

properly set before use to ensure accurate addressing of the dome

at the control center and to control several dome cameras. The

address code is made up of SW3 (8 bits) on PCB board. The 8 bit

switch uses the 8421 binary coded decimal system. The largest

value is 256. 1 means ON status and 0 means OFF status.

3.1.2 Speed Dome Camera Communication Protocol

Setting

The 1st, 2nd and 3rd bits in SW2 are used to set

communication protocol (see following figure)

3.1.3 Speed Dome Camera Transmission Speed Setting

(Baud Rate Setting)

The 4th and 5th bits of SW2 on the PCB board are used to set the

baud rate (see following figure). The default baud rate setting is

9600 bps.

Baud Rate Options: 1200bps 、2400bps 、4800bps、9600bps

Please refer to the controlling device and protocol for baud rate

requirement.

3.1.4 RS-485 Bus Matching Resistance

For better centralized control, a matching resistance should be

connected in a parallel way at the connecting port where the

RS-485 is connected into the device which is the furthest away

from the center controller. By doing this, reflection and interference

from the RS-485 signal and the like can be cleared up. There is a

switcher for controlling of the matching resistance in SW2. And the

matching resistance is connected to the RS-485 cable when the

“No. 8” switcher is set to “ON” status (see following figure).

3.2 XTS-SO10XDN-IND Dome Address, Transmission

Speed, Protocol Setting

Before the dome is installed, the communication protocol, baud

rate and dome address, should be confirmed. Set the code switch,

keeping the setting consistent with the control system. The relative

code switch site and connecting wires are diagramed below for

reference.

Indice

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente