SecurityMan DigiLCDNDVRB Manuale utente

DIGILCDNDVRB Quick Start Guide (iPhone)

The SecurityMan DIGILCDNDVRB is designed for quick and easy installation.

This guide will help you get your system connected to your mobile device in 2

easy steps.

Step 1 HARDWARE

Step 2 INSTALL APP & SCAN QR CODE

1. Open the App Store on your mobile device. Then search for and install the “WatchBot” application developed by “Long Xu”. Once installed, tap on the

“WatchBot” icon (Fig. 2.1), select “+” to add a new device (Fig. 2.2) and then select the “Scan” option (Fig. 2.3).

Connect the Power

Connect the Ethernet

Cable to your Router

Power Button Extend the Antenna

Insert Included

8GB SD Card

(supports up to 32GB)

Connect the Power

Adapter

Attach the Antenna

Fig2.3Fig2.1 Fig2.2

DIGILCDNDVRB Quick Start Guide (iPhone)

Fig2.9

Fig2.4 Fig2.5 Fig2.6

2. Aim your camera at the QR Code located on the bottom of the dock station (Fig. 2.4) so that the app can capture your Device ID. Create a System name

(Fig. 2.5) and enter the Device Password that is associated with your system (Fig. 2.6).

3. When you are done entering the Device Name and Password tap on “Save” (Fig. 2.7). Now select your device (Fig. 2.8) to bring up the live view screen

(Fig. 2.9).

NOTE: The default password is 222222.

NOTE: When accessing your system for the ﬁrst time, the app will prompt you for permission to use your phones microphone. Please tap “OK” if you

would like to hear audio from your camera when available.

Fig2.7 Fig2.8

DIGILCDNDVRB Quick Start Guide (Android)

The SecurityMan DIGILCDNDVRB is designed for quick and easy installation.

This guide will help you get your system connected to your mobile device in 2

easy steps.

Step 1 HARDWARE

Step 2 INSTALL APP & SCAN QR CODE

1. Open the Play Store on your mobile device. Then search for and install the “WatchBot” application developed “Eric Xu”. Once installed, tap on the

“WatchBot” icon (Fig. 2.1), select “+” to add a new device (Fig. 2.2) and then select the “QR Scan” option (Fig. 2.3).

Fig2.3

Fig2.1 Fig2.2

Connect the Power

Attach the Antenna

Connect the Ethernet

Cable to your Router

Power Button Extend the Antenna

Insert Included

8GB SD Card

(supports up to 32GB)

Connect the Power

Adapter

DIGILCDNDVRB Quick Start Guide (Android)

Fig2.9

Fig2.4 Fig2.5 Fig2.6

2. Aim your camera at the QR Code located on the bottom of the dock station (Fig. 2.4) so that the app can capture your Device ID. Create a System name

(Fig. 2.5) and enter the Device Password that is associated with your system (Fig. 2.6).

3. When you are done entering the Device Name and Password tap on “Save” (Fig. 2.7). Now select your device (Fig. 2.8) to bring up the live view screen

(Fig. 2.9).

NOTE: The default password is 222222.

Fig2.7 Fig2.8

Altri manuali per DigiLCDNDVRB

Indice

Altri manuali SecurityMan Telecamera di sicurezza