Secuvox KL216 Manuale utente

Multi-function IR Clock

SecuVox™ Motion Detection Night Vision HD

Clock Camera

KL216

IProduct demonstration

Features:

•Video player and recorder

•Motion Detection Video Recording

•Voice-activated Video recording

•Manual Video Recording

•Taking Photos

•Voice Recording

•Web camera

•24-hr digital clock (display only military

time)

II. Product Introduction

This Motion Detection HD Camcorder Player

and Recorder with Desk Clock and 2.4 inches

LCD Monitor and remote is specially designed

for security surveillance at home, office and for

frequent travelers. It comes with remote control

and supports up to 32GB micro SD card

memory. It is not just a regular military time

digital clock; it is actually a motion-activated

pin-hole HD camcorder, taking video onto a SD

card with motion activated function and let you

view /play/edit/delete on your recorded video or

audio on both your clock’s 2.4” LCD monitor

and or your PC monitor. It is ideal for office,

home, stores, and on-the-go eyewitness covert

surveillance.

III. Instruction Guide

1) Battery Charging: Insert the battery into

the battery compartment with correct

“-“and”+” direction. The device comes with

two USB cables: one for file transferring to

PC and one for charging. Please make sure

you do charging with the USB Charging

Cable (The USB cable with a “USB

Charging Cable” TAG on it). For charging,

turn the power switch at the bottom of clock

to OFF position, connect the device to PC

through the USB Charging Cable. During

charging, the Yellow light flashes. After fully

charged, the Yellow light stays on solid. For

the first time use, please charge it for at least

6 hours or until the Yellow light stays on

solid. (Note: during charging, the device is

not ready for video/audio recording

operation, but you can playback/delete files

during charging with power switch at the

bottom of clock at ON position).

2) Turn on power: Turn the power switch at

the bottom of clock to the ON position, press

the On/Off button once (or press the “C”

On/Off button once on remote), the device

displays time on screen and the Yellow light

stays on solid. The device is now in Standby

status. To completely turn off the device,

press and hold the On/Off button for 5

seconds (or press and hold the “C” On/Off

button for 5 seconds on remote), the device

will shutdown, Yellow and Blue light are off.

(Note: turning off the device will not affect

the time that was previously set up on

device).

3) Voice-activated Video recording: In

standby status, press the Sound

Control/Down button once (or press the “A”

Sound Control/Down button once on remote),

the Blue light flashes 5 times and then both

Blue and Yellow lights are off, the device is

now in voice-activated standby status. When

the external sound around the clock reaches

65 decibels or more, the device

automatically records video for 3 minutes

and saves video into SD card. The procedure

(3-minute recording) will keep going

continuously if the external sound is more

than 65 decibels again and again, and stops if

the external sound is less than 65 decibels.

To stop voice-activated video recording

function, simply press the Sound

Control/Down button once (or press the “A”

Sound Control/Down button once on remote),

the Yellow light stays on solid (under device

standby status).

4) Motion Detection Video Recording: In

addition to voice-activated function, you also

can use Motion Detection function for video

recording. Under standby status, press and

hold the Motion Detection button for 5

seconds (or press and hold the “D” Motion

Detection button for 5 seconds on remote),

the blue light flashes 5 times and then both

blue and yellow lights are off. The device is

now under Motion Detection status. When

there is motion in front of camera, the device

automatically records video for 3 minutes

and saves the video into SD card. This

procedure will keep going continuously until

there is no motion in front of camera. To stop

the Motion Detection function, simply press

the Motion Detection button once (or press

the “D” Motion Detection button once on

remote), the yellow light stays on solid and

the device is in standby status again.

5) Manual Video Recording: Under standby

status, press the Motion Detection button

once (or press the “D” Motion Detection

button once on remote), the yellow light is

off. The device is now doing video recording

and the recording lasts for only 3 minutes

and stops, and the yellow light stays on solid.

If you want to do recording manually again,

you have to press the Motion Detection

button once again. (Note: every manual

video recording lasts for only 3 minutes).

6) Photo: Under standby status, press the

Photo/Audio/UP button once (or press “B”

Photo/Audio/UP button once on remote), the

screen and yellow light flashes once and

takes photo and saves into SD card and go

back to standby status with solid yellow light

on. So every time you press the

Photo/Audio/UP button once, it takes one

photo.

7) Voice Recording: Under standby status,

press and hold the Photo/Audio/UP button

for 5 seconds (or press the “B”

Photo/Audio/UP button for 5 seconds on

remote), blue light flashes 5 times and both

blue and yellow lights are off. The device is

now doing voice recording. To stop voice

recording, simply press the Photo/Audio/UP

button once (or press “B” Photo/Audio/UP

button once on remote), the yellow light

stays on solid and go back to standby status.

8) Turn on infrared night vision: Under

standby status or during recording, press

once on the On/Off button (or press once on

the On/Off button on remote), the Blue light

stays on solid and the infrared light is on.

You can now do recording in dark area. To

stop infrared night vision function, simply

press once again on the On/Off button, the

blue light turns off and yellow light stays on

solid, back to standby status.

9) Playback or delete mode: Under standby

status, press and hold the “Play” button for 8

seconds, the screen will display document

folders (after you recorded video or audio or

photo). Use “Up” or “Down” button to

choose folder and then press On/Off button

to confirm and enter that folder. After

entering that folder, use “Up” or “Down” to

choose file that you want to play, press

On/Off button to play. Press On/Off button

again to stop playing. If you want to delete

that file, just press “Motion” button (Press

“Motion” button again to cancel delete) and

then press “On/Off” button to confirm delete.

To exist play mode, simply press the “Play”

button once again, the device goes back to

time display on screen, and yellow light

stays on solid under standby status. NOTE:

you can operate this function during

charging (with power switch at the bottom of

clock at ON position).

10) Time setting: Under standby status, press

once on the “Play” button, the screen display

Date Display Method / Date / Time. Press

“Down” or “Up” button to choose and press

On/Off to confirm. After choosing and

confirming set up, press On/Off button once

to go back to time display mode. Note: this

clock only displays military time (24-hour).

11) Low power: If it detects that the battery is

low, yellow and blue lights flash 2 times and

the screen will shutdown, the shutdown will

not affect the recorded files or the date and

time that was previously set up. You just

need to recharge the battery through the USB

Charging Cable. Note: you can see the

battery power status when you go into the

Playback/Delete Mode to play or delete a

recorded file. (Refer to Playback/Delete

Mode section).

12) File Storage and transfer file to PC: Put

the power switch at the bottom of clock to

OFF position, using the USB Data Cable to

connect the device to PC. After the folder

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente