Seedsware TMH Series Manuale utente
i
TM Model “H”
High-Grade Model
Touch Screen Monitor
TMH Series
Instruction Manual
10.4” TMH-310-DC00-01
12.1” TMH-312-DC00-01
Seedsware Corporation
http://www.seedsware.co.jp/global/
ii
Introduction
Thank you for choosing Seedsware products.
This manual describes the functions of the TMH series.
Please read this manual carefully and use the product correctly.
Product will be referred to as “TM” hereinafter.
Copyrights and Trademarks
The copyright of this instruction manual is rightfully owned by Seedsware Corporation.
Reproduction and/or duplication of this product and/or this manual, in any form, in whole or
in part, without permission are strictly prohibited.
Contents of this product and/or this manual are subject to change without previous notice.
Although all efforts have been made to ensure the accuracy of this product and/or the
contents of this manual, should you notice any errors or have any questions, feel free to
contact and notify us.
Seedsware shall not be held liable in any way for damages or losses, nor be held
responsible for any claims by a third party as a result of using this product.
Other product and company names mentioned herein may be the trademarks of their
respective owners。
Precautions for Safe Use
Please go through and follow the below precautions before use.
Safety Symbol Legends
Safety symbols listed below are noted throughout this manual for the TM to be used correctly.
These symbols stand for very important safety information as noted below:
Warning
Indicates a procedure, condition, or statement that, if not strictly observed,
could result in severe human injuries or loss of life.
Caution
Indicates a procedure, condition, or statement that, if not strictly observed,
could result in human injuries or property damage.
Indicates a procedure, condition, or statement that is strictly prohibited for
correct use of the equipment. (Forbidden)
Indicates a procedure, condition, or statement that should be strictly followed
for correct use of the equipment. (Mandatory)
iii
Warnings
Warnings for Design
Designing switches that might cause human injuries and/or property damage on the touchscreen is
strictly prohibited. Unintentional output signals due to malfunction of the main body, units, and/or
cables can cause serious injuries. Design the system so that switches with major functions are
equipped on devices other than the TM itself.
Designing safety related switches on TM is prohibited. Switches related to safety, such as emergency
stop switches, should be made on a different hardware.
Do not use TM as a major warning system that may cause injuries/serious material damages, and or
production stoppage. Control devices related to critical warning displays and warnings should be
structured on an independent, redundant hardware system or a mechanical interlock.
TM is not intended for use for aircraft equipment, aerospace instruments, trunk line communication
equipment, nuclear power control equipment, and medical equipment that concerns life support, and
or other equipment that concerns high reliability and safety. It cannot be used for these purposes.
When using the TM for purposes that concern high reliability and safety functions and accuracy such
as transport equipment (trains, automobiles, ship, etc.), crime/disaster prevention devices, various
safety devices, and medical equipment that does not concern life support, be sure to have safety
features including redundancy and false operation prevention measures incorporated into the entire
system.
Display will black out when the backlight goes out. If mistakenly operated in this condition, it might
result in improper operation. Do not design touch-switches that might cause human injuries and
material damages on the TM
Warnings for Handling
Do not modify/disassemble the TM. It may cause fires and/or electric shocks
Do not use around flammable gas. It may cause explosions.
Do not put any kind of liquid, such as water, and metals into the product. It may cause fire and/or
electrical shocks.
In an event abnormality is detected such as smoke, unusual odor or abnormal noise, pull the power
plug and discontinue use. If continued use, it may cause fire or electrical shocks.
Warnings for Wiring
For wiring and installation, please refer to the manual and specifications in order to conduct it correctly.
It may cause fires and/or electric shocks when not done properly.
Before installing the power cable, make sure power is not being supplied from power source. It may
cause electrical shock if not followed.
Do not use power voltage other than what is specified. It may cause fires and/or electric shocks.
iv
Cautions
Cautions for Disposal
When disposing the product, please treat is as industrial waste.
Precautions for Safe Use
Do not press the display with strong pressure or hard objects. It may break the LCD panel
and cause injuries.
Please use this product within the specified ambient temperature and humidity range. If not
used properly, it may cause malfunctions.
Do not press down on the display area of TM with sharp objects such as mechanical pencils
or drivers. It may damage the display.
If the surface of TM gets dirty, wipe with a dry, soft cloth damped in a neutral detergent then
wrung dry. Do not use thinner or organic solvents.
Do not use in areas where rapid temperature change can cause condensation. It may cause
malfunctions.
In order to prevent product temperature from rising, do not use in areas where heat can be
trapped. Also prevent storing in areas of high temperature.
Do not use or store TM in locations exposed to direct sunlight, fine particles, oil smoke and
steam.
Do not use or store all precision equipment including the TM where shock or vibration can be
applied.
Do not use or store in areas where gasified chemicals are diverged into the air or where
chemical contamination can occur.
When using power source with slow rise-time and fall-time, it may not operate correctly. Be
sure to drop the voltage to 0V when turning the power back on after once turning off the
power, before turning on the power. It may not boot correctly.
v
Handling of LCDs
1) The LCD display contains skin-irritating materials. If liquid materials flow out due to damage and
comes in contact with skin, wash the area under water for at least 15 minutes and consult a doctor.
2) The LCD display might have uneven brightness according to the contents being displayed. This is not
a malfunction.
3) Minute spots (dark or bright) may occur in the LCD display elements. This is a basic characteristic of
the LCD display and not a malfunction.
4) When LCD display is viewed outside the specified view angel, the color might seem different. This is a
basic characteristic of the LCD display and not a malfunction.
5) When displaying a same image for a long period of time, it might cause an image lag. This is a basic
characteristic of the LCD display and not a malfunction.
In order to avoid image lags, change the displayed image periodically and avoid displaying the same
image for a long period of time.
Handling of Analog Resistive Touch Screens
1) Applications that require a point on the touchscreen to be pressed for a long time may cause
failures due to its structural features.
2) The touch screen is made of glass. Scratched glass will break easily. Handle carefully so
that the glass does not come in contact with other glass and/or hard objects.
3) Due to the characteristics of the touch screen, the area just outside the display area will be
read as a coordinate when touched. Please keep this in mind when designing an application
4) The coordinates of the touch screen will become misaligned due to aging or its operating
environment. Correct the coordinates by coordination calibration as necessary. Refer to “4.4
Calibration”for details.
16A4A4-00003E-2
Table of Contents
1. Features ...............................................................................................................................1
1.1 Features........................................................................................................................................... 2
2. Product Configuration...........................................................................................................3
2.1 Standard Accessories...................................................................................................................... 4
2.2 Names and Functions of Each Parts............................................................................................... 5
2.3 Panel Installation ............................................................................................................................. 6
2.4 Installing to Stands .......................................................................................................................... 9
2.5 Wiring............................................................................................................................................. 10
2.6 Operations ..................................................................................................................................... 13
3. OSD....................................................................................................................................14
3.1 OSD Menu..................................................................................................................................... 15
3.2 OSD Menu Operation .................................................................................................................... 16
4. Mouse Emulation Software.................................................................................................18
4.1 System Requirements ................................................................................................................... 19
4.2 Installing Procedure....................................................................................................................... 20
4.3 Multi-monitor Setting...................................................................................................................... 25
4.4 Calibration...................................................................................................................................... 26
5. Maintenance.......................................................................................................................29
5.1 Maintenance .................................................................................................................................. 30
6. Troubleshooting..................................................................................................................31
6.1 Display........................................................................................................................................... 32
6.2 Touch Screen................................................................................................................................. 33
7. Others.................................................................................................................................34
7.1 Warranty and Repair...................................................................................................................... 35
7.2 Production Discontinuance............................................................................................................ 36
7.3 Inquiries ......................................................................................................................................... 37
1 16A4A4-00003E-2
1. Features
Chapter Contents
1.1 Features ....................................................................................................2
2 16A4A4-00003E-2
1.1 Features
■2 Signal input interfaces
・DVI Interface (DVI connector)
・Analog RGB Interface (D-Sub15 pin (mini) connector)
■DC power input (12V/24V) compliant
■USB (Type B) for the touch screen interface
■Long life for industrial equipment/ high luminance LCD
■Analog resistive touch screen
■Possible to realize the same operation environment as the mouse
■Multi-display
■Contrast function
■Brightness adjusting function
■Product Certifications : UL61010 (UL/cUL)
3 16A4A4-00003E-2
2. Product Configuration
Chapter Contents
2.1 Standard Accessories................................................................................4
2.2 Names and Functions of Each Parts .........................................................5
2.3 Panel Installation.......................................................................................6
2.4 Installing to Stands ....................................................................................9
2.5 Wiring ......................................................................................................10
2.6 Operations...............................................................................................13
4 16A4A4-00003E-2
2.1 Standard Accessories
・Accessory list 2pc ・Installation Guide 2pc
・Mounting Bracket 1set (4pcs) ・Power Connector 1pc
・Gasket 1pc (preinstalled to unit)
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali Seedsware Monitor
