Seedsware EM Series Manuale utente

- 1 - 20A4A4-00003E-2

EM Series

10.1” Wide

24VDC

Linux/ Touch Panel Embedded

Open Frame Panel Computer

EM8

Model:

EM8-W310A7-0024-207

Instruction Manual

Seedsware Corporation

http://www.seedsware.co.jp/global/

-  2  - 20A4A4-00003E-2 
Table of Contents 
 Introduction ....................................................................................................................................................... 3
 Notes................................................................................................................................................................. 3
 Precautions for Safe Use................................................................................................................................... 3
 Warnings....................................................................................................................................................... 4
 Cautions........................................................................................................................................................ 5
 Handling of LCD Panels ................................................................................................................................ 7
 Handling of Resistive Touch Screen .............................................................................................................. 7
 Handling of microSD card.............................................................................................................................. 8
 Packaged Contents........................................................................................................................................... 9
 Names of Parts................................................................................................................................................ 10 
 Installation ........................................................................................................................................................11 
 Installing condition........................................................................................................................................11 
 Mounting ..................................................................................................................................................... 12 
6-2-1 Panel Opening Examples ........................................................................................................... 12 
6-2-2 Precautions for Mounting............................................................................................................ 13 
 Wiring Procedure............................................................................................................................................. 14 
 Wiring Location ........................................................................................................................................... 14 
 Inserting and Removing of the microSD card .................................................................................................. 16 
 Inserting the microSD card.......................................................................................................................... 16 
 Removing the microSD card........................................................................................................................ 17 
 Calibration ....................................................................................................................................................... 18 
 Coordinate Calibration................................................................................................................................. 18 
 Starting Method............................................................................................................................................... 18 
 Maintenance.................................................................................................................................................... 18 
 Display ........................................................................................................................................................ 18 
 Regular Maintenance .................................................................................................................................. 18 
 Warranty and Repair ....................................................................................................................................... 19 
 Inquires ....................................................................................................................................................... 19 
 Warranty...................................................................................................................................................... 19 
 Production Discontinuance.......................................................................................................................... 19 
 Repair Condition ......................................................................................................................................... 19 
 Others ............................................................................................................................................................. 20 
 
 

- 3 - 20A4A4-00003E-2

Introduction

Thank you for choosing Seedsware products. Please read this manual carefully and use our product correctly.

This manual describes the 10.1 " panel computer.

In this manual, the 10.1" panel computer is referred to as EM8.

Notes

■ Reproduction and/or duplication of this product and/or this manual, in any form, in whole or in part, without

permission is strictly prohibited.

■ Contents of this product and/or this manual are subject to change without previous notice.

■ Although all efforts have been made to ensure the accuracy of this product and/or the contents of this manual,

should you notice any errors or have any questions, feel free to contact and notify us.

■ Seedsware shall not be held liable in any way for damages or losses, nor be held responsible for any claims

by a third party as a result of using this product.

Precautions for Safe Use

Precautions are noted in this manual in order for the product to be used safely. Read this manual along with other

related manuals carefully to understand the correct handling and functions of the EM8.

Safety Symbol Legends

Safety symbols listed below are noted throughout this manual for the EM8 to be used correctly. These symbols

stand for very important safety information as noted below.

Warning

Indicates a procedure, condition, or statement that, if not strictly observed, could result in

severe human injuries or loss of life.

Caution

Indicates a procedure, condition, or statement that, if not strictly observed, could result in

human injuries or property damage.

Indicates a procedure, condition, or statement that is strictly prohibited for correct use of

the equipment. (Forbidden)

Indicates a procedure, condition, or statement that must be strictly followed for correct use

of the equipment. (Mandatory)

- 4 - 20A4A4-00003E-2

Warnings

WARNING

Warnings for Design

Designing switches that might cause human injuries and/or property damage on the touch screen is strictly

prohibited. Unintentional output signals due to malfunction of the main body, units, and/or cables, etc. can

cause serious injuries. Design the system so that switches with major functions are equipped on other

devices.

Designing safety related switches on the EM8 is prohibited. Switches related to safety, such as emergency

stop switches, should be made on a different hardware.

Design the system so the device will not malfunction due to communication abnormalities between the EM8

and the host controller. Failure to follow may result in injury to the human body or damage to properties.

Do not use EM8 as a major warning system that may cause injuries/ serious material damages, and or

production stoppage. Control devices related to critical warning displays and warnings should be structured on

an independent, redundant hardware system or a mechanical interlock.

EM8 is not intended for use for aircraft equipment, aerospace instruments, trunk line communication

equipment, nuclear power control equipment, and medical equipment that concerns life support, and or other

equipment that concerns high reliability and safety. It cannot be used for these purposes.

When using the EM8 for purposes that concern high reliability and safety functions and accuracy such as

transport equipment (trains, automobiles, ship, etc.), crime/disaster prevention devices, various safety

devices, and medical equipment that does not concern life support, be sure to have safety features including

redundancy and false operation prevention measures incorporated into the entire system.

Display will black out when the backlight goes out. If mistakenly operated in this condition, it might result in

improper operation. Do not design touch-switches that might cause human injuries and material damages on

the EM8.

Phenomenon as below will occur when the backlights go out:

(1) Screen will go out even if the Backlight OFF function is not set.

(2) Display does not recover at touch after the backlight goes off as well as the display.

Warnings for Handling

Do not modify/disassemble the EM8. It may cause fires and/or electric shocks

Do not use around flammable gas. It may cause explosions.

Do not put any kind of liquid, such as water, and metals into the product. It may cause fire and/or electrical

shocks.

- 5 - 20A4A4-00003E-2

Warnings for Wiring

For wiring and installation, please refer to the manual and specifications in order to conduct it correctly. It may

cause fires and/or electric shocks.

Before installing the power cable, make sure power is not being supplied from power source. It may cause

electrical shock.

Do not use power voltage other than what is specified. It may cause fires and/or electric shocks.

Warnings when energized and during maintenance

Do not connect or disconnect the communication cable with the host while the power is on.

Cautions

Cautions for installation

Make sure cables are securely connected to connectors to avoid wrong input and output due to loose

connection.

Cautions for Applying Current and Maintenance

During access to microSD card, do not turn off the EM8 or pull out the microSD card. It might damage the

data inside of the microSD card.

Cautions for Wiring

Make sure chips and objects from wiring do not enter the EM8. It may cause fire or malfunctions.

Cautions for Disposal

When disposing the product, please treat is as industrial waste.

- 6 - 20A4A4-00003E-2

Precautions for Safe Use

Do not press down hard on the display area of EM8 with hard objects. It may break the LCD panel and may

cause injuries. Also, do not press down on the panel with sharp objects such as mechanical pencils or drivers.

It may damage the displays.

Installing EM8 in areas out of the range of the specification will cause failures.

Do not use in areas where temperature rises and dwells rapidly. It may cause failures.

Avoid areas where rapid temperature change could cause condensation. It may cause failures.

Do not put any kind of liquid, such as water, or any metal parts into EM8. It may cause failures or electric

shocks.

Do not use or keep EM8 in locations with exposure to direct sunlight, high temperature, fine particles,

humidity, and/or vibrations.

Do not use or keep in areas where gasified chemicals are exuded into the air, or where chemical

contamination can occur.

Acid, Alkali, other saline chemicals: Failures due to corrosion

Organic solvents: Fire

If the surface of EM8 gets dirty, wipe with a dry, soft cloth damped with a neutral detergent then wrung dry. Do

not use thinner or organic solvents.

LCD of display will deteriorate with ultraviolet rays. Do not use or keep in areas under strong ultraviolet rays.

When stored in sub-ambient temperature, LCD of display might coagulate and cause damage to the panel.

Also, when stored in over-ambient temperature, the LCD will turn into isotropic liquid and will not turn back to

its original state. Please store in specified ambient temperature.

After turning off the power of EM8, leave for a while before turning the power back on. It might not function

normally.

Be sure to take back-up assuming the loss of data in the EM8 in an event of an unexpected accident.

- 7 - 20A4A4-00003E-2

Handling of LCD Panels

1) The LCD display contains skin-irritating materials. If liquid materials flow out due to damage and comes in

contact with skin, wash the area under running water for at least 15 minutes. If it gets into the eyes, wash

under running water and consult a doctor.

2) The LCD display might have uneven brightness according to the contents being displayed. This is not a

malfunction.

3) Minute spots (dark or bright) may occur in the LCD display elements. This is a basic characteristic of the LCD

display and not a malfunction.

4) When LCD display is viewed outside the specified view angel, the color might seem different. This is a basic

characteristic of the LCD display and not a malfunction.

5) When displaying a same image for a long period of time, it might cause an image lag. This is a basic

characteristic of the LCD display and not a malfunction.

In order to avoid image lags, please follow the below procedures:

1. When leaving the same image displayed, use the” display off” function.

2. Change the image displayed periodically and do not display the same image for a long period of time.

Handling of Resistive Touch Screen

1) Please be warned that applications that require for one point to be pressed for a prolonged time may cause

failures due to the touch screen's structural characteristics.

2) The touch screen is made of glass. Glass becomes easy to break if scratched. Please handle with care and

avoid glass from coming in contact other glass and hard objects.

3) Due to the characteristics of the touch screen, pressing a little outside the display area may be detected as the

coordinates of the edge of the touch panel. Please consider the above whtn designing the application.

4) Touch screen coordinates may shift due to aging or depending on its operating environment. Conduct

calibration of the touchscreen to correctly set the coordinates.

5) Please be careful when handling the glass. The glasses are not chamfered and can easily cause injuries.

- 8 - 20A4A4-00003E-2

Handling of microSD card

1) Use a computer for important data and take backup to an outside media (hard disc, CD-R, etc.) on a regular

basis. We will not be held liable for any data lost or changed that is registered in the microSD card.

2) Do not remove the microSD card or turn the unit power off during write or read. It may cause the data inside

the unit or the microSD card to be lost or damaged (deleted).

3) Please keep the socket terminal of the memory cards and microSD card clear of foreign objects.

4) Do not touch the terminals with fingers or metal objects. It may cause malfunctions.

5) When inserting the microSD card, make sure it is inserted in the correct direction.

6) Do not apply unnecessary force when inserting/removing.

7) Do not insert anything other than a microSD card into the microSD card socket. Also be careful of any foreign

objects entering the socket.

8) Do not bend, break, or place under heavy objects.

9) Do not place in areas with sudden temperature change. Condensing will cause malfunctions.

10) Do not place in areas near corrosive chemicals or where corrosive gases evolve. It may cause malfunctions.

11) When cleaning, wipe with a dry soft cloth.

12) When carrying and storing, place the microSD card memory card in its protection case

- 9 - 20A4A4-00003E-2

Packaged Contents

Below are included in the package. Please check before use.

*Maximum number of units that could be stored: 5 units

＜Note＞

Although efforts have been made to ensure quality and packaging at shipment, should you notice any damage or a

shortage of parts, please contact a dealer or Seedsware for additional instructions before use.

Main Unit 10 units/box*

- 10 - 20A4A4-00003E-2

Names of Parts

■Back

①USB Host

②USB Device

③Power Input

④Ethernet

⑤Serial Port (SIO1)

⑥Serial Port (SIO2)

⑦SIO2 setting switch

⑧Status LEDs for Ethernet Port

⑨SPI/PWM Audio

⑩Battery Input2

⑪Battery Input1

⑫DIO

■ Top

⑬microSD Card slot

⑬

①

⑨

⑧

⑤

⑦

②

③

④

⑥

⑫

⑪

⑩

Altri manuali per EM Series

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Seedsware Schermo tattile

Seedsware

Seedsware EM Series Manuale utente

Seedsware

Seedsware EM Series Manuale utente

Seedsware

Seedsware EMG Series Manuale del proprietario

Seedsware

Seedsware TM Series Manuale del proprietario

Seedsware

Seedsware EM Series Manuale utente

Manuali Schermo tattile popolari di altre marche

Elecro Engineering

Elecro Engineering Poolsmart Plus Istruzioni per l'installazione

Johnson Controls

Johnson Controls IQ4 HUB Manuale utente

Elo TouchSystems

Elo TouchSystems ET2270L Manuale utente

Elo TouchSystems

Elo TouchSystems ET1002L Manuale utente

Elo TouchSystems

Elo TouchSystems 3201L Manuale utente

Duratec

Duratec S15 Manuale utente

Crestron

Crestron TPMC-3SM Manuale utente

Racelogic

Racelogic MFD Touch Manuale utente

J2 580 Guida utente

HAI

HAI OmniTouch 10p Manuale utente

panel

panel PC PSR108-FM Series Manuale utente

Tipro

Tipro FREE+ Manuale utente

Systemline

Systemline Commander Manuale utente

Interactive Technologies

Interactive Technologies Insite Manuale utente

GVision

GVision Legacy Manuale utente

BeiJer

BeiJer T21C-C24 Manuale utente

Advantech

Advantech ITM-5117 Series Manuale utente

Edge

Edge CS Manuale utente