seeed studio EdgeBox-RPI-200 Manuale utente
———————————————————————————————————————————
———————————————————————————————————————————
EdgeBox-RPI-200 User Manual V2.1
Raspberry PI CM4 Based Edge computer
Revision History
Revision
Date
Changes
1.0
17-08-2022
Created
2.1
13-01-2022
Product Change Notice
EdgeBox-RPI-200 User Manual
Product Change Notice:
As a part of our continual improvement process, we made the below changes in hardware version
D.
There is impact on the software due to this change.
CP2104->CH9102F
USB2514B->CH334U
CP2105->CH342F
The description in the Linux have been changed:
ttyUSB0-> ttyACM0
ttyUSB1-> ttyACM1
MCP79410->PCF8563ARZ
The address of the new RTC is 0x51.
EdgeBox-RPI-200 User Manual
i
Contents
1Introduction................................................................................................................................1
1.1 Features ..........................................................................................................................1
1.2 Interfaces.........................................................................................................................2
1.2.1 Multi-Func phoenix connector ......................................................................................3
1.3 Block Diagram .................................................................................................................4
2Installation .................................................................................................................................5
2.1 Mounting..........................................................................................................................5
2.2 Connectors and Interfaces...............................................................................................6
2.2.1 Power supply................................................................................................................6
2.2.2 Serial Port (RS232 and RS485) ...................................................................................7
2.2.3 DI&DO..........................................................................................................................8
2.2.4 HDMI ............................................................................................................................9
2.2.5 Ethernet........................................................................................................................9
2.2.6 USB HOST...................................................................................................................9
2.2.7 Console (USB type-C)..................................................................................................9
2.2.8 LED ............................................................................................................................10
2.2.9 SMA Connector ..........................................................................................................11
2.2.10 NANO SIM card slot................................................................................................11
2.2.11 Mini-PCIe ................................................................................................................12
2.2.12 M.2..........................................................................................................................14
3Drivers and Programming Interfaces .......................................................................................15
3.1 LED ...............................................................................................................................15
3.2 Serial Port (RS232 and RS485).....................................................................................15
3.3 Cellular over Mini-PCIe..................................................................................................15
3.4 WDT ..............................................................................................................................19
3.4.1 Block Diagram of WDT...............................................................................................19
3.4.2 How it works...............................................................................................................19
3.5 RTC ...............................................................................................................................21
3.5.1 RTC Chip information.................................................................................................21
EdgeBox-RPI-200 User Manual
ii
3.5.2 Enable RTC................................................................................................................21
3.6 UPS for safe shut down (Optional) ................................................................................23
4Electrical specifications............................................................................................................24
4.1 Power consumption .......................................................................................................24
4.2 UPS ...............................................................................................................................24
5Mechanical Drawings...............................................................................................................24
EdgeBox-RPI-200 User Manual
WWW.SEEEDSTUDIO.COM 1
1 Introduction
EdgeBox-RPI-200 is a rugged fan less Edge Computing Controller with Raspberry Pi Computer
Module 4(CM4) for harsh industry environment. It can be used to connect the field networks with
cloud or IoT applications. It is designed from the ground up to meet the challenges of rugged
applications at competitive prices, ideal for small business or small order with scale multi-level
demands.
1.1 Features
•State-of-the-art Aluminum chassis for Harsh environment
•Integrated passive heat sink
•Built-in mini PCIe socket for RF module, such as 4G, WI-FI, Lora or Zigbee
•SMA antenna holes x2
•Encryption chip ATECC608A
•Hardware Watchdog
•RTC with Super Capacitor
•Isolated DI&DO terminal
•35mm DIN Rail support
•Wide power supply from 9 to 36V DC
•Optional: UPS with SuperCap for safe shutdown*
These features make the EdgeBox-RPI-200 designed for easy setup and quick deployment for
typical industrial applications, such as status monitoring, facility management, digital signage and
remote control of public utilities. Furthermore, it is a user-friendly gateway solution with 4 cores
ARM Cortex A72 and most industry protocols can save on total deployment costs including
electrical power cabling cost and help reduce the product’s deployment time. Its ultra-lightweight
and compact design is the answer for applications in space-constricting environments ensures it
can operate reliably in a variety of extreme environments including in-vehicle applications.
NOTE: For UPS function please contact us for more information.
EdgeBox-RPI-200 User Manual
WWW.SEEEDSTUDIO.COM 2
1.2 Interfaces
①Multi-Func phoenix connector
②Ethernet connector
③USB 2.0 x 2
④HDMI
⑤LED2
⑥LED1
⑦SMA antenna 1
⑧Console (USB type C)
⑨SIM card slot
⑩SMA antenna 2
EdgeBox-RPI-200 User Manual
WWW.SEEEDSTUDIO.COM 3
1.2.1 Multi-Func phoenix connector
Note
Func name
PIN #
PIN#
Func name
Note
POWER
1
2
GND
RS485_A
3
4
RS232_RX
RS485_B
5
6
RS232_TX
RS485_GND
7
8
RS232_GND
DI0-
9
10
DO0_0
DI0+
11
12
DO0_1
DI1-
13
14
DO1_0
DI1+
15
16
DO1_1
NOTE: 24awg to 16awg cable are suggested
EdgeBox-RPI-200 User Manual
WWW.SEEEDSTUDIO.COM 4
1.3 Block Diagram
The processing core of the EdgeBox-RPI-200 is a Raspberry CM4 board. A specific base board
implements the specific features. Refer to next figure for the block diagram.
EdgeBox-RPI-200 User Manual
WWW.SEEEDSTUDIO.COM 5
2 Installation
2.1 Mounting
The EdgeBox-RPI-200 is intended for two wall mounts, as well one with 35mm DIN-rail. Refer to
next figure for the recommended mounting orientation.
EdgeBox-RPI-200 User Manual
WWW.SEEEDSTUDIO.COM 6
2.2 Connectors and Interfaces
2.2.1 Power supply
Pin#
Signal
Description
1
POWER_IN
DC 9-36V
2
GND
Ground (Reference potential)
The PE signal is optional. If there is no EMI present, the PE connection can leave open.
Altri manuali per EdgeBox-RPI-200
1
Indice
Altri manuali seeed studio Controllori
