Seeed ODYSSEY X86 Manuale utente

ODYSSEY X86 User Manual

Getting Started with ODYSSEY X86

ODYSSEY X86 v2 board powered by the latest Intel® Core™ 11th Gen. processor

and Intel® UHD Graphics or Intel® Iris Xe Graphics, which delivers high CPU and

AI performance for various applications. It has two high-speed 2.5-Gigabit

Ethernet ports and supports hybrid connectivity including, BLE and WIFI.

Meanwhile.

Features

Powered by the latest 11th Gen Intel® Core™ CPU and Intel® UHD Graphics

or Intel® Iris Xe Graphics.

Rich peripherals including dual® 2.5-Gigabit Ethernet ports, USB 3.2 Type-A

port, USB 2.0 Type-A port, HDMI port and DP port

Support hybrid connectivity including BLE and WIFI

Dual SATA III 6.0 Gbps data connectors for 3.5"/2.5" SATA hard disk drives

with enough space inside the enclosure to store them both

M.2 B-Key/ M-Key/ E-Key for expandability such as SSD, WIFI

Pre-installed Windows 10 Enterprise (Unactuated), also support another

Windows OS and Linux OS

Specification

Comparison

Quick Start with ODYSSEY X86

If you want to get started with ODYSSEY X86 in the fastest and easiest way, you can

follow the guide below.

Hardware Required

You need to prepare the following hardware before getting started with ODYSSEY

X86。

ODYSSEY X86

Power Adapter(provided)

External monitor

HDMI/DP cable

Keyboard and Mouse

Hardware Installation

For this part, we will introduce how to install or replace some hardware inside

ODYSSEY X86. If there are no needs for you, please skip it. You might follow the

Assembly Guide Manual attached at the end of this page to access to the main

board of ODYSSEY X86 before reading this part.

DDR4 Installation

DDR4-3200MT/s has been pre-installed for all versions of ODYSSEY X86 but you

can also add a new DDR4 to the other channel or replace the pre-installed one with

your own to expand memory. The dual-channel SO-DIMM slots support DDR4-

3200MT/s up to 64GB in total.

SSD Installation

A NV Me SSD has been pre-installed for all versions of ODYSSEY X86, while, still, the

M.2 M-Key 2242/2280(PCIe 3.0 x4) allows you to replace it with the SSD you desire.

WIFI Module Installation

All versions of ODYSSEY X86 have installed 2230 Dual Band WIFI AX201 Module

at M.2 E-Key 2242/2280(PCIe 3.0x4). If you want to replace the pre-installed WIFI

Module, feel free to follow the steps below.

Step 1. Remove the SSD from M.2 M-Key slot.

Step 2. Take off the WIFI antenna cable and remove the pre-installed WIFI Module

from M.2 E-Key.

Step 3. Install the new WIFI Module and connect the WIFI antenna cable back to it.

Step 4. Install the SSD back to M.2 M-Key.

Hardware Connection

For this part, we will introduce the interface connection of ODYSSEY X86. There are

two versions of ODYSSEY X86. Please note that different versions might have

different interfaces.

Display Connection

There are three methods for ODYSSEY X86 to connect to a display while the third

method is only for High-performing versions.

Method 1. HDMI Port、

Method 2. DP Port

Keyboard and Mouse Connection

Connect keyboard and mouse through USB ports. There are one USB 3.2 port and

one USB 2.0 port for Basic versions while there are one USB 3.2 port and two USB

2.0 ports for High-performing versions. Basic version

Audio Connection

For Basic versions, the Audio Jack is on the left side I/O panel, while, for High-

performing versions, it's on the right side I/O panel for High-performing versions

Power Connection

There are two methods to power up ODYSSEY X86, and the second one is only for

High-performing versions.

Method 1. Simply connect AC-DC power adapter (included in the product box) with

AC power cord (Out of the product box but still in the package), then connect it to

12V DC Jack of ODYSSEY X86.

Method 2. Connect USB Type-C charging cable (Not included in ODYSSEY X86) to

the Thunderbolt 4 USB Type-C port (This port is only available with High-performing

versions)

Operation System Installation

For all versions of ODYSSEY X86, Windows 10 Enterprise (Unactuated) has been pre-

installed, you can simply boot it up and activate the OS. However, ODYSSEY X86 still

supports another Windows OS and, also, Linux OS, so you can cover the pre-

installed OS with the one you want.

Note: 5G Band(W52): indoor use only

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference

by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer

could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

RF Exposure Information

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated with minimum distance 20cm

between the radiator and your body.

This transmitter must not be co-located or operating in conjunction with any other antenna

or transmitter.

This device is intended only for OEM integrators under the following conditions:

1. The antenna must be installed such that 20cm is maintained between the antenna and

users, and

2. The transmitter module may not be co-located with any other transmitter or antenna.

The internal antenna and external rod antenna has been approved for the modular. The

maximum antenna gain are 2.13dBi (BT/2.4G Wi-Fi Antenna 1 & 2: External Antenna)

& 1.57dBi (5.2G & 5.8G Wi-Fi Antenna 1 & 2: External Antenna). For situations where the

host manufacturer is responsible for an external connector, the integration instructions shall

inform the installer that a unique antenna connector must be used on the Part 15

authorized transmitters used in the host product.

Important Note: In the event that these conditions cannot be met (for example certain laptop

configurations or co-location with another transmitter), then the FCC authorization is no

longer considered valid and the FCC ID cannot be used on the final product. In these

circumstances, the OEM integrator will be responsible for re-evaluating the end product

(including the transmitter) and obtaining a separate FCC authorization.

Any company of the host device which install this modular with limit modular approval should

perform the test of radiated emission and spurious emission according to FCC part 15C:

15.247 and 15.407 requirement, only if the test result comply with FCC part 15.247 and 15.407

requirement, then the host can be sold legally.

End Product Labeling

If the FCC identification number is not visible when the module is installed inside another

device, then the outside of the device into which the module is installed must also display a

label referring to the enclosed module. This exterior label can use wording such as the

following: Contains Transmitter Module FCC ID: Z4T-ODYSSEY-A.

Manual Information to the End User

The OEM integrator has to be aware not to provide information to the end user regarding

how to install or remove this RF module in the user’s manual of the end product which

integrates this module.

The end user manual shall include all required regulatory information/warning as show in this

manual.

The modular is not intended to be fielded serviceable as without shielding, host manufacturer

must be considered shielding when integrating a module.

When the module is installed inside another device, the user manual of this device must

contain below warning statements;

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may cause

Changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate the equipment. The devices must be installed and

used in strict accordance with the manufacturer's instructions as described in the user

documentation that comes with the product.

Indice

Altri manuali Seeed Scrivania

Seeed

Seeed ODYSSEY X86J4105 Manuale utente

Manuali Scrivania popolari di altre marche

HP m9060n - Pavilion - Elite Scheda tecnica

Asus

Asus E210 Series Manuale utente

Dell

Dell Inspiron 600m Manuale utente

Dell

Dell Inspiron 3662 Manuale utente

TotalFlow

TotalFlow uFLO Manuale utente

HP Presario SV7000 - Desktop PC Manuale utente

HP ProDesk 400 G5 Manuale

Logitech

Logitech MK320 Manuale utente

Dell

Dell XPS 730 H2C Manuale utente

Sony

Sony Vaio Series Manuale utente

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Manuale utente

Alto

Alto MD 250 Manuale utente

Lenovo

Lenovo ThinkCentre Edge 72 Manuale

Lenovo

Lenovo ThinkStation D20 Manuale

Arbor Technology

Arbor Technology FPC-7800 Series Manuale utente

Sony

Sony VAIO VGX-TP1 Series Manuale utente

Asus

Asus Eee Box B204 Manuale utente

Dell

Dell Optiplex 9010 All In One Manuale utente