2. Installation and Precautions
2.1 Precautions on Use
The power switch must be turned off prior to installation of the device.
Please install in a place well-ventilated avoiding extremely hot, humid or
cold places.
Please do not place magnetic kinds near the device.
The optimum ambient temperature for the use of the device is 0℃~
40℃, and it needs to be careful when the device is used for both inside
and outside the building.
Giving a strong vibration or impact to the device could cause a
breakdown, therefore adequate precautions should be taken when
installing or using the Device.
Should be careful not to have the lines changed when connecting them.
When you connect the operating power line to the Camera, you should
confirm if the Camera uses AC or DC power, and for the case of DC power
then you should be careful not to have the polarity changed to the wrong
one (If you connect the AC Adapter to Transmitter, and connect the DC
Adapter to the Receiver, then it would cause a breakdown).
Please turn on the switch for power supply after confirming the insulation
condition of the control cable connected from the outside.
