Seeley MagIQtouch Manuale utente
OWNER’S MANUAL
MagIQtouch Controller
Original English Instructions
Hello and congratulations on purchasing
a MagIQtouch Controller for your home!
The MagIQtouch Controller is a versatile and intelligent Controller
that can be used with a range of products from Seeley International.
Please refer to the relevant sections in this manual as well as
the owner’s manual provided with each of your products for
information on how to set-up and operate your system.
MAGIQTOUCH CONTROLLER OWNER’S MANUAL |1
TABLE OF CONTENTS
GENERAL TIPS 2
QUICK REFERENCE 3
QUICK START 4
OPERATION 10
Navigation 10
Manual Mode 11
Appliance Mode 14
Program Mode 15
SETTINGS MENU 23
General Menu 25
Cooler & Heater Menus 26
Service Menu 29
WARNINGS & SERVICE MESSAGES 30
SLAVE CONTROLLERS 32
TROUBLE SHOOTING 33
POWER OUTAGES 33
2 |
• Mount the MagIQtouch Controller in a room you want climate
controlled. Ideally it should be positioned 1.5m (5’) from the oor
and away from any other heating or cooling sources.
• Ensure the MagIQtouch Controller is not exposed to direct
sunlight as this will impact the temperature reading.
• Avoid blocking or restricting the vent holes located in the side
of the MagIQtouch Controller, as this is where the thermostat is
located.
• Do not use harsh chemical cleaners to clean the touch screen.
For best results use distilled water or a touchscreen specic
cleaning agent with a microbre cloth.
GENERAL TIPS
MAGIQTOUCH CONTROLLER OWNER’S MANUAL |3
QUICK REFERENCE
Here’s a brief visual guide to the main features of your
wall controller.
System On/O Time Date
External / Internal “Live” Temperatures
(External Temperature Is Only Available
If An External Sensor Is Fitted To Your
System)
Decrease
Temp or
Fan Speed
Thermostatic
Mode
Primary Modes
(This will dier
depending
on your
installation)
Set Temp or
Fan Speed
Increase or
Decrease
Temp or
Fan Speed
Select Thermostatic or
Fan Speed Control
(Evap Coolers Only)
Select Automated
Times for Appliances
to Turn On or O
Optimise
your Wall
Control and
System
Fan Speed Control
(Overrides
Thermostatic
Control)
4 |
ILL1521-C
ILL1522-C
QUICK START
Here’s a brief visual guide to get you started quickly!
Continue reading for detailed instructions.
STEP 1
Activate screen.
MAGIQTOUCH CONTROLLER OWNER’S MANUAL |5
ILL1523-C
ILL1524-C
QUICK START cont
STEP 2
Select mode from lower taskbar.
6 |
ILL1525-C
ILL1526-C
QUICK START cont
STEP 3
Turn on cooler or heater.
MAGIQTOUCH CONTROLLER OWNER’S MANUAL |7
ILL1527-C
ILL1528-C
QUICK START cont
STEP 4
Set desired temperature.
8 |
ILL2413-A
ILL2414-A
STEP 5
Switch between thermostatic control to fan speed control.
(Evaporative coolers only)
Note: When in thermostatic mode the fan speed automatically
adjusts to achieve set temperature.
QUICK START cont
Altri manuali per MagIQtouch
6
Indice
Altri manuali Seeley Controllori
Seeley
Seeley Braemar XK76 Manuale utente
Seeley
Seeley CW-H 2020 PLC Manuale utente
Seeley
Seeley MagIQtouch Manuale utente
Seeley
Seeley MAGICTOUCH MS1 Manuale utente
Seeley
Seeley coolair Braemar Breezair MaglQtouch Manuale utente
Seeley
Seeley MagIQtouch Manuale utente
Seeley
Seeley MaglQtouch Istruzioni per l'installazione
