Seesharp ePoster SEP560-1.9 Manuale utente
Seesharp ePoster User’s Manual
Table of Content
1. Setting up .................................................................................................................................... 1
1.1 Free Standing ........................................................................................................................ 1
1.2 With base stand .................................................................................................................... 1
1.3 With wall bracket .................................................................................................................. 2
2. Connecting to the Seesharp ePoster ............................................................................................ 2
2.1 Connect with USB cable ......................................................................................................... 2
2.2 Connect through the Built-in WiFi Access Point ..................................................................... 2
2.3 Connect through WiFi Router ................................................................................................ 3
2.4 Connect through Ethernet ..................................................................................................... 3
3. Software Instructions .................................................................................................................. 3
3.1 Windows Software ................................................................................................................ 3
3.2 iPhone App ......................................................................................................................... 10
4 Specification .............................................................................................................................. 12
5.Trouble Shooting........................................................................................................................13
See Sharp Visual Inc +1 833 733 7427
www.seesharpvisual.com
1
1. Setting up
1.1 Free Standing
Place the device on a flat floor, fully Pull out the kick stand
1.2 With base stand
Assemble the side plates onto the base plates with the screws provided.
Assemble the tool-less bolts onto the ePoster.
Single-side installation position Double-side installation position
See Sharp Visual Inc +1 833 733 7427
www.seesharpvisual.com
2
1.3 With wall bracket
Secure the wall bracket on the wall
Secure the bolts on the device
Hang the device onto the wall bracket
After setting up the device
Plug the power cable. Switch on the power button
Power indicator light will turn on once power is on
2. Connecting to the Seesharp ePoster
2.1 Connect with USB cable
Use the included USB Type A to Type B cable to connect the computer to the device, the device will show up in
the software’s device list.
This method will always work, use this method if you forget the WiFi password or cannot connect to the
ePoster with other methods.
2.2 Connect through the Built-in WiFi Access Point
The Seesharp ePoster has built-in WiFi and it’s turned on by default. In this mode, the Seesharp ePoster works
as a Wireless router, computers or smart phones can be connected to it through this WiFi.
The default WiFi SSID is the device’s serial number, the default password is 123456789. They can be changed
in the Windows/Mac software.
Note: The WiFi Access Point may be not visible if the network mode is not set to WiFi Hostspot mode. To
change it, use the USB cable method to connect to the device and change the network setting in the
Windows/Mac software (See software instruction Network setting section)
Connecting to WiFi AP on Windows Connecting to WiFi AP on iOS
See Sharp Visual Inc +1 833 733 7427
www.seesharpvisual.com
3
2.3 Connect through WiFi Router
See software instruction network setting section
2.4 Connect through Ethernet
See software instruction network setting section
3. Software Instructions
3.1 Windows Software
Download the software from www.seesharpvisual.com, and open the software.
Connect the ePoster with USB Type A - Type B cable or through other connection method. The connected
Seesharp ePosters will show up in the Devices list.
3.1.1 Menu Introduction
3.1.1.1 Device, Device menu includes 3 functions
3.1.1.1.1 Refresh Now: fresh the device list.
3.1.1.1.2 Group, form a group for multiple ePosters. All operation for this group will apply to all
ePosters in this group.
3.1.1.1.3 Cascade, Cascade multiple ePosters to a larger screen.
See Sharp Visual Inc +1 833 733 7427
www.seesharpvisual.com
2
3.1.1.2 Program ,
3.1.1.2.1 Program management will lead to the programs window, with options to select previously
uploaded program, add new program, or import program.
3.1.1.2.1.1 Select a program from the programs list to upload content to the ePoster. Right
click on the program to edit, delete, export the program, or export the program to
USB Drive.
3.1.1.2.1.2 Import. To import the exported program and upload the program to an ePoster.
See Sharp Visual Inc +1 833 733 7427
www.seesharpvisual.com
3
3.1.1.2.1.3 Add New. Name the program, then select target device from the dropdown list.
Target devices are the ePoster models. Once target device is selected, its resolution
will be shown in the Width (xxx) Height(xxx) section. By default, the content will be
applied to 1 ePoster. Select more than 1 ePoster wide from the width dropdown list
to apply the program to a wider screen when needed. Click “+”and follow software
guide to load picture/video from your computer. All programs uploaded will be
saved in the software under the programs list.
For more instructions, see below 3.1.5.1.2 “ Add New” program
3.1.1.3 Settings. Select Language from the Settings section
3.1.1.4 Tools.
3.1.1.4.1 Create Network Setting USB Drive: Conveniently copy a network setting to multiple ePosters
with a thumb drive with data created from this function.
Plug an USB Drive onto the computer, click to enter Create Network Setting USB Drive. The
Following window will pop up. Input the target network information, then click Create. The
network setting data will be stored in the USB drive. Plugging the USB drive to any ePoster
will automatically set the ePoster’s network to the same network settings created in the USB
Drive.
See Sharp Visual Inc +1 833 733 7427
www.seesharpvisual.com
4
WIFI Hotspot, each ePoster has a built in WIFI hotspot which can be used as a WIFI access
point for other ePosters. SSID is the serial number of the ePoster that is functioning as a
hotspot for other ePosters. Password is 123456789 by default. Password can be changed or
might have been changed under “network settings.”
WIFI network is the network with your target router.
3.1.1.5 Help. User Manual, software update information and About information can be found from the
Help menu.
3.1.1.6 The 3 icons provide quick access to 3 functions respectively: Group, Cascade and program
management.
3.1.2 Device List
The connected devices will be displayed in the device list
The column Name is the device name which can be specified by the user
The column Model is the model name of the device
Click the device name, the device information will show up on the right side.
3.1.3 General Information
3.1.3.1 Name
The device name, the default device name is the serial number.
To change the device name, click “…” button, a New name input dialog will popup
Input the new name, click OK. The new name will be stored on the device. Or click cancel to cancel.
After the name is changed, the new name will be updated in the device list.
3.1.3.2 Serial Number
The device’s serial number
3.1.3.3 Model
The device’s model name
See Sharp Visual Inc +1 833 733 7427
www.seesharpvisual.com
5
3.1.3.4 Resolution
The device’s resolution
3.1.4 Brightness
Display and change the device’s brightness, the range is 0-100%
To change the brightness, drag the slider and move to the new position, the new brightness will
take effect when you release the mouse button.
3.1.5 Input Source
Input Source controls the media content displayed on the device
3.1.5.1 Internal Media
When internal media is selected, the device plays the content from built-in media player. The
built-in media plays program (or called playlist) defined by the users.
3.1.5.1.1 Select an existing program to play a program previously uploaded to the device, select the
program from the program list
3.1.5.1.2 Add new program
To add a new program to the device, click “…” button
The popup window will list all programs on this computer and on the device
If the desired program already in the list, select the program and click OK
See Sharp Visual Inc +1 833 733 7427
www.seesharpvisual.com
6
To create a new program, click “Add New” button, a “New Program” window will popup
Name the program. Default program name will be “Program 1/2/3..”, then select target device
from the dropdown list. Target device should be the ePoster model. Once target device is
selected, its resolution will be shown in the Width (xxx) Height(xxx) section.
By default, the new program will be applied to 1 ePoster. If the content is to be displayed on
multiple cascaded devices, select the number from the width dropdown list representing the
total pixels of the devices. Click “+”and follow software guide to load picture/video from your
computer.
To delete an image or video from the list, select the item and click the button “-“
When multiple image or video are selected, they will be played sequentially.
“Save and Upload”: to save the program to the software on this computer and upload the
program to the ePoster immediately.
See Sharp Visual Inc +1 833 733 7427
www.seesharpvisual.com
7
“Save”: to save the program in the software on this computer, the program will go into the
program list here. You could select this program to upload to the ePoster later when
needed.
Select the program and right click, a context menu will popup
Select Delete to delete the program.
Select Edit to Edit a program.
Export, the program can be exported to a file and then be imported to an ePoster through
the software import function under program.
Export to USB Drive, the program can be exported to a USB Drive then be displayed by
plugging in the USB Drive directly onto an ePoster.
3.1.5.2 USB Drive
When a USB Flash drive with valid program is plugged into the device’s USB port, the USB Drive
option becomes enabled and selectable.
When the USB drive with valid program is plugged in, the device will automatically switch to the
program on the USB drive.
Valid program can be exported from the program list by right click the program name and select
“Export to USB”;
3.1.5.3 Prioritize HDMI Input
When the “Prioritize HDMI input” is checked, the device will automatically switch to HDMI
content.
3.1.6 Network Settings
3.1.6.1 Connection Type
3.1.6.2 IP Address
3.1.6.3 Details
3.1.6.4 Modify, click modify to change network settings.
3.1.6.4.1 Wifi Hotspot. By default, the ePoster is configured with WiFi Hotspot.
Questo manuale è adatto per i seguenti modelli
1
Indice
