SEFRAM BK Precision DAS60 Manuale utente

RECORDER

DAS60

USER’S MANUAL

November 2017

Thank you for buying a SEFRAM recorder and for your trust in our company. The main goal of our

various teams (research department, production, commercial, after-sales…) is to meet your

requirements as much as possible by designing or updating high tech products.

With your recorder, you will find a CD-ROM including the user’s manual of the DAS60 recorder.

Please read cautiously this user’s manual for an optimal use of your recorder.

Our teams are available to provide you any additional information:

04-77-59-01-01

Commercial service e-mail: [email protected]

After-sales service e-mail: [email protected]

Technical support e-mail: [email protected]

Fax: +33 (0)4 77 57 23 23

Web: www.sefram.fr

Any total or partial copy of this document needs the authorization of Sefram.

WARRANTY

Your instrument is guaranteed for two years for labor and parts against any manufacturing defect

and/or functioning hazard. This guarantee extends from the delivery date and ends 730 calendar

days later.

In case of guarantee contract, this will cancel or replace these guarantee conditions here above.

The guarantee conditions by SEFRAM are available on the website www.sefram.com. The general

guarantee conditions should prevail on the following conditions that they sum up.

This guarantee does not cover the result of any abnormal use, handling mistake or mistake in the

storage conditions outside the defined range.

In case of application of the guarantee, the user shall return, at its own expenses, the relevant

appliance to our factory:

SEFRAM Instruments & Systèmes

After-Sales Service

32, rue Edouard MARTEL

BP 55

42009 SAINT-ETIENNE CEDEX 2

And add a description of the observed breakdown to the appliance.

The standard supplies provided with the appliance (cables, outlets…), the consumables (batteries

…) and the optional supplies (suitcases…) are guaranteed for 3 months against any manufacturing

defect.

Such items as a LCD screen or a touchpad are guaranteed only for a normal use.

The guarantee does not cover wearing, accidental breaks or consecutive to a shock or any abnormal

use.

The factory options integrated to the appliance are guaranteed for the same duration as the

appliance itself.

In case of replacement or repair of the product, the remaining guarantee duration shall be:

-The remaining duration of the guarantee if the appliance is still under guarantee

-If the guarantee duration is less than 90 days, the replaced part is guaranteed for 90 days

Any replacement part becomes the property of the user and the exchanged parts become the

property of SEFRAM.

In case of intervention by an insurance company, the product becomes the property of the insurance

company upon its exclusive request. Else, it shall remain property of the user.

The guarantee covers exclusively the materials manufactured and provided by SEFRAM.

Any intervention by the user or any third party without prior authorization by the company voids

the guarantee.

The user shall be responsible for the return of its appliance to our site. Hence, it shall provide for a

conditioning that shall correctly protect the appliance while shipping. It shall subscribe, at its own

expenses, any insurance required for the transport.

The SEFRAM company reserves the right to refuse any product wrongly conditioned and not to

take in charge any break consecutive to the transport.

Particular case of the battery: There is a Li-ion battery as a standard equipment of this appliance. It

shall not be transported outside the appliance. In no case shall the user replace it. Its replacement in

the factory is necessary to check the charge system and the protective securities.

What to do in case of malfunction?

In case of malfunction or for any advice for use, please contact the technical support by SEFRAM

Instruments & Systèmes:

A technician shall answer you and give you any information required to solve your problem.

What to do in case of failure?

In case of failure of your appliance, please contact the technical support:

Some advice!

Some technical help!

SEFRAM Instruments & Systèmes commits itself to help you on the phone about the use of your

appliance.

Please call or Technical Support:

Or e-mail: [email protected]

We thank you for your trust.

METROLOGY

The meteorological conditions of your measurement instrument are defined in the specifications of

this notice. Climate and environmental conditions restrict the specifications of your recorder.

SEFRAM checks the characteristics of each appliance one by one on an automatic bench during its

manufacture. The adjustment and control are guaranteed under conditions of the ISO9001

certification by facilities in connection with the COFRAC (or equivalent in the context of ILAC

reciprocity).

The specified characteristics are considered stable for a period of 12 months from the first use under

normal conditions of use.

We recommend a check after 12 months and max. 24 months of use, then every 12 months after 24

months.

For any check of the characteristics, the following average climate conditions shall be maintained

(23°C+3°C –50(+20)%RH). The recorder should have been working for 0,5 hour before check.

We recommend that you have this control made by our after-sales service (Service Après-Vente) for

the best service and preservation of the measuring quality of your instrument.

When a recorder returns to SEFRAM, maximum service is provided with internal updating

according to the required adjustments and software updates. In case of shift in the characteristics,

your instrument shall be adjusted to recover its original characteristics.

Important Information

1.TABLE OF CONTENT

1. TABLE OF CONTENT ............................................................................................................1.1

2. IMPORTANT INFORMATION...............................................................................................2.7

2.1. Specific cautions.................................................................................................................2.7

2.2. Security instructions ...........................................................................................................2.7

2.3. Conformity and limits of the device...................................................................................2.8

3. PRESENTATION.....................................................................................................................3.1

3.1. General................................................................................................................................3.1

3.2. Description..........................................................................................................................3.2

3.2.1. Connection: .................................................................................................................3.2

3.3. Touch screen.......................................................................................................................3.3

3.3.1. Description of the title bar...........................................................................................3.3

3.3.2. Description of the channel validation window............................................................3.4

3.3.3. Description of the network analysis window..............................................................3.5

3.4. MAIN MENU.....................................................................................................................3.7

3.5. Update of the internal software ..........................................................................................3.9

4. SETUP and PRECAUTIONS of USE ......................................................................................4.1

4.1. Loading of the recording paper ..........................................................................................4.1

Precautions for storage of the recordings..................................................................................4.1

4.2. Setup...................................................................................................................................4.2

4.3. Configuration at power-up..................................................................................................4.2

4.3.1. Voltage measurement..................................................................................................4.3

4.3.2. Temperature measurement with a thermocouple ........................................................4.3

4.3.3. Temperature measurement with Pt100/Pt1000...........................................................4.3

4.3.4. Current measurement ..................................................................................................4.3

4.3.5. Connection of the ground............................................................................................4.4

4.4. Routine maintenance ..........................................................................................................4.4

4.5. Battery ................................................................................................................................4.4

4.6. Offset calibration................................................................................................................4.5

4.7. Default calibration..............................................................................................................4.6

4.8. Screen brightness................................................................................................................4.6

4.9. Locking of the recorder ......................................................................................................4.6

4.10. User mode.......................................................................................................................4.6

5. USE ...........................................................................................................................................5.1

5.1. Description of the various modes.......................................................................................5.1

Important Information

5.2. Setup menu.........................................................................................................................5.2

5.3. Channels Menu...................................................................................................................5.3

5.3.1. Analog channels..........................................................................................................5.4

5.3.1.1. Type of measurement ΔV/Δt :.................................................................................5.5

5.3.1.2. Type of measurement ʃV.dt:....................................................................................5.7

5.3.2. Additional functions between channels.......................................................................5.8

5.3.3. Logic channels.............................................................................................................5.9

5.4. Validation of the channels................................................................................................5.10

5.5. « Direct display » key ............................................................................................5.11

5.5.1. Real time on-screen display of the measurements....................................................5.11

5.5.2. XY display.................................................................................................................5.12

5.5.3. Digital display...........................................................................................................5.13

5.6. « Trigger » menu ..............................................................................................................5.15

5.7. « Memory output » key .........................................................................................5.16

5.8. « Record » key ...................................................................................................5.17

5.9. Screen copy.......................................................................................................................5.18

6. TRIGGERS ...............................................................................................................................6.1

6.1. Analog channel trigger .......................................................................................................6.2

6.1.1. Single threshold...........................................................................................................6.2

6.1.2. Multiple thresholds......................................................................................................6.3

6.1.3. Parasites.......................................................................................................................6.4

6.1.4. Trigger on Logic Channels..........................................................................................6.5

7. MATHEMATICAL CALCULATIONS...................................................................................7.1

7.1. Definitions..........................................................................................................................7.1

7.2. Types of calculations..........................................................................................................7.2

8. DIRECT MODE........................................................................................................................8.1

8.1. Launching the printing........................................................................................................8.1

8.2. Configuration of print.........................................................................................................8.3

8.3. Relaunching the printing ....................................................................................................8.4

8.4. Writing information............................................................................................................8.4

9. MEMORY MODE....................................................................................................................9.1

9.1. Setup and start of the data acquisition................................................................................9.1

9.2. Sampling period..................................................................................................................9.3

9.3. Internal memory, blocks.....................................................................................................9.3

9.4. Trigger position ..................................................................................................................9.3

Important Information

9.5. Double Trigger mode..........................................................................................................9.4

9.6. Recording............................................................................................................................9.5

9.7. Memory output ...................................................................................................................9.7

10. TEMPLATE MODE ............................................................................................................10.1

10.1. Setup and launching of the data acquisition .................................................................10.1

10.2. Creation of the template................................................................................................10.3

11. FILE MODE.........................................................................................................................11.2

11.1. Setup and triggering of the data acquisition .................................................................11.2

11.2. Restrictions ...................................................................................................................11.3

12. NETWORK ANALYSIS.....................................................................................................12.1

12.1. General..........................................................................................................................12.1

12.2. Network setup...............................................................................................................12.2

12.3. Real time display of the signals ....................................................................................12.5

12.4. Power analysis setup ..............................................................12.6

12.4.1. Parameter acquisition file......................................................................................12.6

12.4.2. Record launch........................................................................................................12.6

12.4.3. Recordable parameters ..........................................................................................12.8

12.5. Record...........................................................................................................................12.8

12.6. Measurement process....................................................................................................12.9

13. FILE MANAGEMENT........................................................................................................13.2

13.1. General..........................................................................................................................13.2

13.2. Management of the configuration files.........................................................................13.3

13.2.1. Save setup files......................................................................................................13.3

13.2.2. Load setup files......................................................................................................13.3

13.2.3. Save data acquisitions............................................................................................13.3

13.2.4. Recovery of the data acquisition files....................................................................13.5

13.3. Operating software........................................................................................................13.7

13.3.1. Transfer via FTP....................................................................................................13.7

13.3.2. Display under SeframViewer ................................................................................13.8

13.3.3. Managing with SeframPilot...................................................................................13.9

14. INPUTS / OUTPUTS...........................................................................................................14.2

14.1. Additional Input/Output Connectors.............................................................................14.2

14.2. Logic inputs ..................................................................................................................14.3

14.2.1. Use.........................................................................................................................14.3

14.3. Alarm outputs................................................................................................................14.3

14.3.1. Use.........................................................................................................................14.4

14.4. Power supply output .....................................................................................................14.4

14.5. Exvoltage box input/output interface............................................................................14.5

Important Information

15. ETHERNET INTERFACE..................................................................................................15.2

15.1. Ethernet Interface..........................................................................................................15.2

15.1.1. General...................................................................................................................15.2

15.2. WIFI interface...............................................................................................................15.3

15.3. FTP transfer ..................................................................................................................15.4

15.4. Managing with VNC:....................................................................................................15.5

15.4.1. Changing the password..........................................................................................15.5

15.4.2. External software VNC Viewer.............................................................................15.5

15.4.3.......................................................................................................................................15.6

15.5. Programming language.................................................................................................15.6

15.5.1. Format of the reception messages .........................................................................15.6

15.5.2. Formats of emission messages ..............................................................................15.7

15.6. Standard instructions.....................................................................................................15.8

15.7. Indication of the status of the device ............................................................................15.9

15.7.1. Structure of the status data.....................................................................................15.9

15.7.2. Service request logs.............................................................................................15.10

15.7.3. Log of standard events.........................................................................................15.12

15.7.4. Log of alarms.......................................................................................................15.12

15.7.5. Use of the status data structure............................................................................15.13

15.8. Dictionary of programming ........................................................................................15.15

15.8.1. Configuration.......................................................................................................15.15

15.8.2. Parameters of the channels..................................................................................15.16

15.8.3. Functions of the channels and between channels................................................15.18

15.8.4. Paper....................................................................................................................15.19

15.8.5. Triggerings...........................................................................................................15.20

15.8.6.....................................................................................................................................15.20

15.8.7. Triggers................................................................................................................15.21

15.8.8.....................................................................................................................................15.21

15.8.9. Memory mode......................................................................................................15.22

15.8.10. Relaunchs, real time save ....................................................................................15.23

15.8.11...................................................................................................................................15.23

15.8.12. Launching plots and data acquisitions.................................................................15.23

15.8.13. Diagrams..............................................................................................................15.24

15.8.14. Direct display.......................................................................................................15.25

15.8.15. Mathematical functions .......................................................................................15.25

15.8.16. Memory output ....................................................................................................15.26

15.8.17...................................................................................................................................15.26

15.8.18. Request of service................................................................................................15.27

Important Information

15.9. Error messages............................................................................................................15.27

16. TECHNICAL SPECIFICATIONS ......................................................................................16.1

16.1. Isolated inputs...............................................................................................................16.1

16.1.1. General characteristics...........................................................................................16.1

16.1.2. Voltage recording..................................................................................................16.1

16.1.3. RMS recording ......................................................................................................16.2

16.1.4. Temperature recording ..........................................................................................16.2

16.1.5. Frequency recording:.............................................................................................16.2

16.1.6. PWM recording .....................................................................................................16.2

16.1.7. Counting Recording:..............................................................................................16.2

16.1.8. Sampling................................................................................................................16.3

16.1.9. Bandwidth..............................................................................................................16.3

16.2. Additional inputs / outputs............................................................................................16.4

16.2.1. Logic channels.......................................................................................................16.4

16.2.2. Alarm outputs ........................................................................................................16.4

16.2.3. External power supply...........................................................................................16.4

16.3. Inputs with platinum resistance ....................................................................................16.4

16.4. Triggers.........................................................................................................................16.5

16.5. Memory data acquisition...............................................................................................16.5

16.6. Data acquisition to file..................................................................................................16.5

16.7. Network analysis...........................................................................................................16.6

16.7.1. Ranges and accuracies for voltage and intensity...................................................16.6

16.7.2. Frequency ..............................................................................................................16.6

16.7.3. Power factor...........................................................................................................16.6

16.7.4. Peak and peak factor..............................................................................................16.6

16.7.5. Rate of harmonics as calculated in power analysis ...............................................16.7

16.8. Printer option ................................................................................................................16.7

16.9. Communication interface..............................................................................................16.7

16.9.1. Ethernet..................................................................................................................16.7

16.9.2. USB connectors.....................................................................................................16.7

16.10. Display..........................................................................................................................16.8

16.11. Environment conditions................................................................................................16.8

16.11.1. Weather conditions................................................................................................16.8

16.12. Power supply - battery ..................................................................................................16.8

16.12.1. Dimensions and weight .........................................................................................16.8

16.13. Electromagnetic compatibility, Security.......................................................................16.9

16.13.1. Electromagnetic compatibility according to EN 61326-1 and 61326-1-2.............16.9

16.13.2. Security, insulation class, installation category...................................................16.10

Indice

Altri manuali SEFRAM Registratore vocale

SEFRAM

SEFRAM DAS220 Manuale utente

SEFRAM

SEFRAM DAS240 Manuale utente

Manuali Registratore vocale popolari di altre marche

Sony

Sony ICD-UX533F Manuale utente

RCA

RCA VR5230 Manuale utente

Ramsey Electronics

Ramsey Electronics BULLSHOOTER ENDLESS LOOP BS2C Guida utente

Sony

Sony TCM-400DV Manuale utente

LogTag

LogTag TREL30-16 Manuale utente

SVAT

SVAT CVP800 Manuale utente

Marantz

Marantz PMD620 Manuale utente

Zoom

Zoom H4next Manuale utente

Roland

Roland BR-900CD Manuale utente

JVC

JVC ProHD GY-HMZ1U Manuale operativo e di manutenzione

Panasonic

Panasonic PQT8531-P Manuale utente

Sanyo

Sanyo TRC-6400 Manuale utente

Tascam

Tascam DR-07 Manuale utente

Olympus

Olympus DW-90 Manuale utente

Sanyo

Sanyo ICR-B150 Manuale utente

Korg

Korg D4 Manuale utente

Sony

Sony ICD-SX46 - Ic Recorder Manuale utente

Olympus

Olympus DIGITAL VOICE RECORDER WS-200S Istruzioni per il montaggio