Sega Rambo Manuale utente
OWNER'S MANUAL
IMPORTANT
• Before using this product, read this manual carefully to understand the
contents herein stated.
• After reading this manual, be sure to keep it near the product or in a
convenient place for easy reference when necessary.
800 ARTHUR AVENUE, ELK GROVE VILLAGE, IL 60007-5215
Phone: 888-877-2669 Facsimile: 847-427-1065
WEB: WWW.SAU.SEGA.COM
© SEGA
All manufacturers, cars, names, brands and associated imagery featured in this game are trademarks and/or
copyrighted materials of their respective owners. All rights reserved.
550-30-303
1ST PRINTING SEP. 2008
SEGA AMUSEMENTS U.S.A., INC.
TM
TABLE OF CONTENTS
i
TABLE OF CONTENTS
BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING:
TABLE OF CONTENTS....................................................................................... i
INTRODUCTION ................................................................................................ iv
1HANDLING PRECAUTIONS ......................................................................... 1
2PRECAUTIONS REGARDING INSTALLATION LOCATION........................ 3
2-1 LIMITATIONS OF USAGE ................................................................................................3
3 PRPRECAUTIONS REGARDING PRODUCT OPERATION ......................... 4
4ASSSEMBLY AND INSTALLATION .............................................................. 7
4-3 FIXATION TO INSTALLATION SITE..............................................................................10
4-4 TURNING ON THE POWER ..........................................................................................12
4-5 CHECKING ASSEMBLY (SETUP) .................................................................................14
5 PRECAUTIONS WHEN MOVING THE MACHINE ..........................................................................18
68GAME DESCRIPTION ......................................................................................................................20
6-1 HOW TO PLAY ...............................................................................................................20
6-2 HINTS FOR PLAYING THE GAME ................................................................................25
ii
TABLE OF CONTENTS
7TEST MODE ................................................................................................ 26
7-1 SWITCH UNIT AND COIN METER ................................................................................28
7-2 SYSTEM TEST MODE ...................................................................................................29
7-3 GAME TEST MODE .......................................................................................................31
7-3-1 GAME TEST MODE Menu....................................................................................31
7-3-2 INPUT TEST ..........................................................................................................33
7-3-3 OUTPUT TEST ......................................................................................................34
7-3-4 GAME ASSIGNMENTS.........................................................................................35
7-3-5 GUN ADJUSTMENT..............................................................................................36
7-3-6 BOOKKEEPING ....................................................................................................41
7-3-7 BACKUP DATA CLEAR ........................................................................................44
810COIN SELECTOR ....................................................................................... 46
9PERIODIC INSPECTION.............................................................................. 47
10 TROUBLESHOOTING................................................................................. 49
11 GAME BOARD ............................................................................................ 51
11-1 REMOVING THE LINDBERGH ....................................................................................51
11-2 CLEANING THE LINDBERGH RED EX.......................................................................52
11-3 COMPOSITION OF THE GAME BOARD.....................................................................55
18
12 PARTS LIST................................................................................................. 56
13 WIRING DIAGRAM...................................................................................... 60
INTRODUCTION
iii
INTRODUCTION
This manual is intended to provide detailed descriptions together with all the necessary information covering the
general operation of electronic assemblies, electro-mechanicals, servicing control, spare parts, etc. for the product,
“PRIMEVAL HUNT DX.”
This manual is intended for the owners, personnel and managers in charge of operation of the product.
Operate the product after carefully reading and sufciently understanding the instructions.
In the unlikely event that the product does not function correctly, DO NOT allow anyone other than a technician
to touch the internal system. Turn off the power to the machine, making sure to unplug the electrical cord from the
outlet, and contact the ofce listed below or the point of purchase for this product.
Use of this product is unlikely to cause physical injuries or damage to property. However, points that require special
attention are indicated by bold text, the word “IMPORTANT” and the symbol below.
Indicates important information that, if ignored, may result in the mishandling of
the product and cause faulty operation or damage to the product.
Sega Amusements U.S.A., Inc.
800 Arthur Avenue, Elk Grove Village, IL 60007-5215, U.S.A.
TEL: 1-847-364-9787
TOLL FREE: 1-888-877-2669
FAX: 1-847-427-1065
iv
INTRODUCTION
Denition of 'Site Maintenance Personnel or Other Qualied Individuals'
Procedures not described in this manual or marked as 'to be carried out by site
maintenance personnel or other qualied professionals' should not be carried
out by personnel without the necessary skill or technology. Work carried out by
unqualied persons may cause serious accidents, including electrocution.
Parts replacement, maintenance inspections and troubleshooting should be carried out by site maintenance personnel
or other qualied professionals. This manual includes directions for potentially dangerous procedures which should
only be carried out by professionals with the appropriate specialized knowledge.
The site maintenance personnel or other qualied professionals mentioned in this manual are dened as follows:
Site maintenance personnel:
Individuals with experience in maintaining amusement equipment, vending machines, etc., working under the
supervision of the owner/operator of this product to maintain machines within amusement facilities or similar
premises by carrying out everyday procedures such as assembly, maintenance inspections, and replacement of units/
expendable parts.
Activities to be carried out by site maintenance personnel:
Amusement equipment/vending machine assembly, maintenance inspection and replacement of units/expendable
parts.
Other qualied professionals:
Persons employed by amusement equipment manufacturers, or involved in design, production, testing or
maintenance of amusement equipment. The individual should have either graduated from technical school or hold
similar qualications in electrical/electronics/mechanical engineering.
Activities to be carried out by other qualied professionals:
Amusement equipment/vending machine assembly, repair/adjustment of electrical/electronic/mechanical parts.
1
1
1
1
HANDLING PRECAUTIONS
HANDLING PRECAUTIONS
1
When installing or inspecting the machine, be very careful of the following points and pay attention to ensure that
the player can enjoy the game safely.
Non-compliance with the following points or inappropriate handling running counter to the cautionary matters
herein stated can cause personal injury or damage to the machine.
● Before performing work, be sure to turn the power off. Performing the work
without turning the power off can cause an electric shock or short circuit. In the
case work should be performed in the status of power on, this manual always
states to that effect.
● To avoid an electric shock or short circuit, do not plug in or unplug quickly.
● To avoid an electric shock, do not plug in or unplug with a wet hand.
● Do not expose power cords or earth wires on the surface, (oor, passage,
etc.). If exposed, the power cords and earth wires are susceptible to damage.
Damaged cords and wires can cause an electric shock or short circuit.
● To avoid causing a re or an electric shock, do not put things on or damage the
power cords.
● When or after installing the product, do not unnecessarily pull the power cord. If
damaged, the power cord can cause a re or an electric shock.
● In case the power cord is damaged, ask for a replacement through where the
product was purchased from or the ofce herein stated. Using the cord as is
damaged can cause re, an electric shock or leakage.
● Be sure to perform grounding appropriately. Inappropriate grounding can cause
an electric shock.
● Be sure that connections such as IC BD are made properly. Insufcient insertion
can cause an electric shock.
● Specication changes, removal of equipment, conversion and/or addition, not
designated by SEGA are not permitted.
- Failure to observe this may cause a re or an electric shock. Non-compliance
with this instruction can have a bad inuence upon physical conditions of the
players or the onlookers, or result in injury during play.
- SEGA shall not be held responsible for damage, compensation for damage to
a third party, caused by specication changes not designated by SEGA.
● Do not perform any work or change parts not listed in this manual. Doing so may
lead to an accident.
If you need to perform any work not listed in this manual, request work from the
ofce indicated in this manual or the point of purchase, or inquires for details.
● Be sure to perform periodic maintenance inspections herein stated.
2
1
2
1
HANDLING PRECAUTIONS
● For the IC board circuit inspections, only the logic tester is allowed. The use of a
multiple-purpose tester is not permitted, so be careful in this regard.
● Static electricity from your body may damage some electronics devices on the
IC board. Before handling the IC board, touch a grounded metallic surface so
that the static electricity can be discharged.
● This product uses a DLP projector. DLP projector screens scratch easily, so be
careful when cleaning the screen.
● Some parts are not designed and manufactured specically for this game
machine. The manufacturers may discontinue, or change the specications of
such general-purpose parts. If this is the case, SEGA cannot repair or replace a
failed game machine whether or not a warranty period has expired.
CONCERNING THE STICKER DISPLAY
CONCERNING WARNING DISPLAYS
This SEGA product has stickers attached describing the product manufacture No. (Serial No.) and Electrical
Specications. It also has a Sticker describing where to contact for repair and for purchasing parts.
When inquiring about or asking for repairs, mention the Serial No. and Name of Machine indicated on the Sticker.
The Serial Number indicates the product register. Identical machines could have different parts depending on the
date of production. Also, improvements and modications might have been made after the publication of this
manual. In order to ensure you order the correct parts, mention the Serial No. when contacting the applicable places.
This SEGA product has warning displays on stickers, labels and/or printed instructions adhered/attached to or
incorporated in the places where a potentially hazardous situation could arise. The warning displays are intended
for accident prevention for customers and for avoiding hazardous situations relating to maintenance and servicing
work. Some portions of the cabinet contain high voltage and may cause accidents if touched. When performing
maintenance, be very careful of the warning displays. It is especially important that any complex repair and
replacement work not mentioned herein should be performed by those technical personnel who have knowledge of
electricity and technical expertise.
In order to prevent accidents, caution any customer ignoring the warnings to cease and desist immediately.
3
1
3
2
PRECAUTIONS REGARDING INSTALLATION LOCATION
PRECAUTIONS REGARDING INSTALLATION LOCATION
2
This product is an indoor game machine. Do not install it outside. Even indoors,
avoid installing in places mentioned below so as not to cause a re, electric
shock, injury and/or malfunction.
- Places subject to rain or water leakage, or places subject to high humidity in the
proximity of an indoor swimming pool and/or shower, etc.
- Places subject to direct sunlight, or places subject to high temperatures in the
proximity of heating units, etc.
- Places lled with inammable gas or vicinity of highly inammable/volatile
chemicals or hazardous matter.
- Dusty places.
- Sloped surfaces.
- Places subject to any type of violent impact.
- Vicinity of anti-disaster facilities such as re exits and re extinguishers.
- Areas where the temperature exceeds the applicable temperature (ambient
temperature) range of 10 to 30 degrees centigrade.
2-1 LIMITATIONS OF USAGE
● Be sure to check the Electrical Specications. Ensure that this product
is compatible with the location's power supply, voltage, and frequency
requirements. A plate describing Electrical Specications is attached to the
product. Non-compliance with the Electrical Specications can cause a re and
electric shock.
● This product requires a breaker and earth mechanism as part of the location
facilities. Using the product without these can cause a re and electric shock.
● Ensure that the indoor wiring for the power supply is rated at 15 A or higher (AC
single phase 100 V ~ 120 V area), and 7 A or higher (AC 220 V ~ 240 V area).
Non-compliance with the Electrical Specications can cause a re and electric
shock.
● Be sure to use an independent power supply equipped with an earth leakage
breaker. Using a power supply without an earth leakage breaker can cause an
outbreak of re if a power surge occurs.
● Putting many loads on one electrical outlet can cause generation of heat and a
re resulting from overload.
● When using an extension cord, ensure that the cord is rated at 15 A or higher
(AC 100 V ~ 120 V area) and 7 A or higher (AC 220 V ~ 240 V area). Using a cord
rated lower than the specied rating can cause a re and electric shock.
4
1
4
3
PRECAUTIONS REGARDING PRODUCT OPERATION
To avoid injury and trouble, be sure to pay attention to the behavior of visitors and players.
PRECAUTIONS REGARDING PRODUCT OPERATION
3
3-1 BEFORE OPERATION
In order to avoid accidents, check the following before starting the operation:
● To ensure maximum safety for the players and the customers, ensure that where
the product is operated has sufcient lighting to allow any warnings to be read.
Operation under insufcient lighting can cause bodily contact with each other,
hitting accident, and/or trouble between customers.
● Be sure to perform appropriate adjustment of DLP projector. For operation of this
machine, do not leave monitor's ickering or deviation as is. Failure to observe
this can have a bad inuence upon the players' or the customers' physical
conditions.
● It is suggested to ensure a space allowing the players who feel sick while
playing the game to take a rest.
● Check if all of the adjusters are in contact with the surface. If they are not, the
cabinet can move and cause an accident.
Ensure that all of the adjusters are in contact with the oor.
Indice
Altri manuali Sega Macchina per videogiochi arcade
Sega
Sega Derby Owners Club World Edition Manuale utente
Sega
Sega bop it ARCADE Manuale utente
Sega
Sega Star Wars Trilogy Manuale utente
Sega
Sega D2 Manuale di riferimento
Sega
Sega Grid 42 Manuale utente
Sega
Sega Dinosaur King Manuale utente
Sega
Sega FORD RACING TWIN-FULL BLOWN Manuale utente
Sega
Sega Harley Davidson & L.A Riders Manuale utente
Sega
Sega SpongeBob SQUAREPANTS Manuale utente
Sega
Sega Hot Racer Manuale utente
Sega
Sega JUNGLE TREASURES Manuale utente
Sega
Sega Future Tone ProjectDIVA Arcade Manuale utente
Sega
Sega Sonic Sports Air Hockey 2P Manuale utente
Sega
Sega SHOOT THIS WIN THIS Manuale utente
Sega
Sega TARGET BRAVO Manuale utente
Sega
Sega THE HOUSE OF THE DEAD III DELUXE Manuale utente
Sega
Sega House Of The Dead Scarlet Dawn Manuale utente
Sega
Sega MIB Manuale utente
Sega
Sega PIRATES of MONSTER ISLAND Manuale utente
Sega
Sega Lindbergh Universal Manuale utente
Manuali Macchina per videogiochi arcade popolari di altre marche
Universal Space
Universal Space COCONUT BASH Manuale utente
Bay-Tek
Bay-Tek EVOLVE Manuale utente
Global VR
Global VR America's Army Istruzioni per l'installazione e il funzionamento
Atronic
Atronic Cashline Manuale utente
Universal Space
Universal Space Checky Monkey Manuale utente
Bay-Tek
Bay-Tek Skee Ball 1908 Alley Manuale utente
Aristocrat Technologies
Aristocrat Technologies Mars X Upright Manuale utente
Family Fun Companies
Family Fun Companies Reactor Guida rapida
Universal Space
Universal Space FRUIT MANIA Extreme Manuale utente
falgas
falgas CARRUSEL FIESTA Manuale utente
Konami
Konami DanceDanceRevolution Manuale utente
Bay-Tek
Bay-Tek quik drop Manuale utente
Bandai Namco
Bandai Namco PAC-MAN BATTLE ROYALE CHOMPIONSHIP DELUXE Manuale utente
Adrenaline
Adrenaline Flying Tickets Istruzioni per l'installazione e il funzionamento
Swinks
Swinks Stern Pinball Ghostbusters Manuale utente
Innovative Concepts in Entertainment
Innovative Concepts in Entertainment MONOPOLY ROLL-N-GO Manuale utente
jakar
jakar SPEED CARS Manuale utente
Carmelli
Carmelli HAT TRICK NG1015H Manuale utente