Sega TARGET BRAVO Manuale utente

IMPORTANT

• Before using this product, read this manual carefully to understand the

contents indicated in this document.

• After reading this manual, be sure to keep it near the product or in a

convenient location for easy reference when needed.

OWNER'S MANUAL 420-0029-00K

TARGET BRAVO: OPERATION GHOST

Sega Amusements Europe Limited.

42 Barwell Business Park, Leatherhead Road, Chessington, Surrey, KT9 2NY. United Kingdom.

Telephone: +44 (0) 208 391 8090 Facsimile: +44 (0) 208 391 8099

email: [email protected] Web: http://www.segaarcade.com

Sega Games Co,. Ltd.1-2-12, Haneda, Ota-ku, Tokyo, 144-8531. Japan.

Telephone: +81-3-5736-7111 Facsimile: +81-3-6871-7672

sega-games.co.jp

Errors and omissions excepted (E&OE)

1st PRINTING

July 2017 revision 1.00

OPERATOR & SERVICE MANUAL

Indicates that mishandling the product by disregarding this pictograph will cause

severe injury or death.

Indicates that mishandling the product by disregarding this warning will cause a

potentially hazardous situation which can result in death or serious injury.

Indicates that mishandling the product by disregarding this caution will cause a slight

hazardous situation which can result in personal injury and/or material damage.

For the safe usage of the product, the following pictographs are used:

Indicates "HANDLE WITH CARE." In order to protect the human body and equipment, this

display is attached to places where the instruction manual should be referred to.

Indicates a "protective earth terminal." Before operating the equipment, be sure to connect it to the

ground.

(The step may be omitted for products in which a power cable with earth is used.)

•

Perform work in accordance with the instructions herein stated.

Instructions for work are explained by paying attention to the aspect of accident prevention. Failing

to perform work as per the instructions can cause accidents. In the case where only those who have

technical expertise should perform the work to avoid hazardous situation, the instructions herein state

that the site maintenance personnel should perform such work.

Be sure to turn off the power before working on the machine.

To prevent an electric shock, be sure to turn off the power and unplug the power cable before carrying

out any work that requires direct contact with the interior of the product. If the work is to be performed in

the power-on status, the instruction manual herein always states to that effect.

Be sure to ground the earth terminal.

(This is not required in the case where a power cable with earth is used.)

This product is equipped with the earth terminal. When installing the product, connect the earth terminal

to the "accurately gro

unded indoor earth terminal" by using an earth wire. Unless the product is grounded

appropriately, the user can be subject to an electric shock. After performing repair, etc. for the control

equipment, ensure that the earth wire is firmly connected to the control equipment.

Ensure that the power supply used is equipped with an earth leakage breaker. Using a

power supply which is not equipped with the earth leakage breaker can cause a fire when earth leakage

occurs.

Be sure to use fuses which meet the specified rating.

(Only for the machines which use fuses.)

Using fuses exceeding the specified rating can cause a fire and an electric shock.

•

TARGET BRAVO

Before using this product, be sure to read the following

To maintain safety:

To ensure the safe operation of this product, be sure to read the following before usage.

The following instructions are intended for the users, operators and the personnel in charge of the operation of

the product.After carefully reading and sufficiently understanding the warning displays and cautions, handle the

product appropriately. Be sure to keep this manual close to the product or in a convenient place for future

reference.

Herein, explanations which require special attention are enclosed with dual lines. Depending on the potentially

hazardous degrees, the terms of DANGER, WARNING, CAUTION, etc. are used. Be sure to understand the

contents of the displays before reading the text

•

Specification changes (removal of equipment, conversion and addition) not

designated by SEGA are not allowed.

The parts of the product include warning labels for safety, covers for personal protection, etc. It is very

hazardous to operate the product by removing parts and/or modifying the circuits. Should doors, lids and

protective parts be damaged or lost, refrain from operating the product, and contact where the product

was purchased from or the office herein stated.

SEGA shall not be held responsible for any accidents, compensation for damage to a third party,

resulting from the specifications not designated by SEGA.

Ensure that the product meets the requirements of appropriate electrical

specifications.

Before installing the product, check for electrical specifications. SEGA products have a nameplate on

which electrical specifications are described.

Ensure that the product is compatible with the power supply

voltage and frequency requirements of the location. Using any electrical specifications different from the

designated specifications can cause a fire and an electric shock.

Install and operate the product in places where appropriate lighting is available,

allowing warning labels to be clearly read.

To ensure safety for the customers, labels and printed instructions describing potentially hazardous

situations are applied to places where accidents can be caused. Ensure that where the product is operated

has sufficient lighting allowing the warnings to be read. If any label is peeled off, apply it again

immediately. Please place an order with where the product was purchased from or the office herein stated.

When handling the monitor, be very careful. (Applies

only to products with monitors.)

Some of the monitor parts are subject to high tension voltage. Even after turning off the power, some

portions are still subject to high tension voltage sometimes. Monitor repair and replacement should be

performed only by those technical personnel who have knowledge of electricity and technical expertise.

Be sure to adjust the monitor properly.

(Applies only to products with monitors.)

Do not operate the product leaving on-screen flickering or blurring as it is. Using the product with the

monitor not properly adjusted may cause dizziness or a headache to an operator, a player, or the

customers.

When transporting or reselling this product, be sure to attach this manual to the

product.

•

In the case where commercially available monitors and printers are used in this product, onlythe

contents relating to this product are explained herein. Some commercially available equipment

has functions and reactions not stated in this manual. Read this manual together with the

specific

instruction manual of such equipment.

Descriptions herein contained may be subject to improvement changes without notice.

The contents described herein are fully prepared with due care. However, should any question

arise or errors be found, please contact SEGA.

Normally, at the time of shipment, SEGA products are in a status allowing for usage immediately

after transporting to the location. Nevertheless, an irregular situation may occur during

transportation. Before turning on the power, check the following points to ensure that the product

has been transported in a satisfactory status.

Are there any dented portions or defects (cuts, etc.) on the external surfaces of the cabinet?

Are casters and adjusters damaged?

Do the power supply voltage and frequency requirements meet with those of the location?

Are all wiring connectors correctly and securely connected? Unless connected in the correct way,

connector connections can not be made accurately. Do not insert connectors forcibly.

Do power cables have cuts and dents?

Are all accessories available?

Can all doors and lids be opened with the accessory keys? Can doors and lids be firmly closed?

INSPECTIONS IMMEDIATELY AFTER TRANSPORTING THE PRODUCT TO THE LOCATION

INTRODUCTION

This manual is intended to provide detailed descriptions together with all necessary information covering the general

operation ofelectronic assemblies, electromechanical, servicing control, spare parts, etc. for the product,

"TARGET BRAVO: OPERATION G.H.O.S.T."

This manual isintended for the owners, personnel managers incharge of operation ofthis product.

Operate the product after carefully reading and sufficiently understanding the instructions.

In the unlikely event that the product does notfunction correctly, DONOT allow anyone other than a technician

to touch the internal system. Turn off the power tothe machine, making sure tounplug the electrical cord fromthe

outlet, and contact the office listed below orthe point-of-purchase for this product.

Use of this product is unlikely to cause physical injuries or damage to property. However, points that require special

attention are indicated bybold text, thewords "STOP, IMPORTANT or CAUTION” and the symbols below.

Sega Amusements International Limited.

42 Barwell Business Park, Leatherhead Road, Chessington, Surrey, KT9 2NY. United Kingdom.

European Sales: +44 (0) 208 391 8090 Facsimile: +44 (0) 208 391 8099

USA Sales:

STS (Spares):

email:

+00 (1) 224 265 4287

+44 (0) 208 391 8060

mailbox@sega.co.uk

Facsimile:

Web:

+44 (0) 208 391 8096

http://www.segaarcade.com

Indicates a warning or caution that, if ignored, may result in the mishandling

of the product and cause faulty operation or damage to the product.

Indicates important information that, if ignored, may result in the mishandling

of the product and cause faulty operation or damage to the product.

Definition of 'Site Maintenence Personnel or Other Qualified Individuals

Parts replacement, maintenance inspections and troubleshooting should be carried out by site maintenance personnel

or other qualified professionals. This manual includes directions for potentially dangerous procedures which should

only be carried out by professionals with the appropriate specialised knowledge.

The site maintenance personnel or other qualified professionals mentioned in this manual are defined as follows:

Site maintenance personnel:

Individuals with experience in maintaining amusement equipment, vending machines, etc., working under the super-

vision of the owner/operator of this product to maintain machines within amusement facilities or similar premises by

carrying out everyday procedures such as assembly, maintenance inspections, and replacement of units/expendable

parts.

Activities to be carried out by site maintenance personnel:

Amusement equipment/vending machine assembly, maintenance inspection and replacement of units/expendable

parts.

Other qualified professionals:

Persons employed by amusement equipment manufacturers, or involved in design, production, testing or mainte-

nance of amusement equipment. The individual should have either graduated from technical school or hold similar

qualifications in electrical/electronics/mechanical engineering.

Activities to be carried out by other qualified professionals:

Amusement equipment/vending machine assembly, repair/adjustment of electrical/electronic/mechanical parts.

Procedures not described in this manual or marked as ‘to be carried out by site

maintenance personnel or other qualified professionals’ should not be carried

out by personnel without the necessary skill or technology. Work carried out by

unqualified persons may cause serious accidents, including electrocution.

Waste of Electrical and Electronic Equipment (WEEE) Statement.

The WEEE (Waste of Electrical and Electronic Equipment) directive places an obligation on all EU based manufac-

turers and importers of Electrical and Electronic Equipment to take back products at the end of their useful life. Sega

Amusements Europe Ltd accepts its responsibility to finance the cost of treatment and recovery of redundant WEEE

in the United Kingdom in accordance with the specified WEEE recycling requirements.

The symbol shown below will be on all products manufactured from 13th August 2005, which indicates this product

must NOT be disposed of with other normal waste. Instead, it is the user’s responsibility to dispose of their waste

equipment by arranging to return it to a designated UK collection point for the correct recycling of waste electrical

and electronic equipment.

For more information about where you can send your waste equipment for recycling contact your local authority of-

fice.

For non-UK users contact your local authority office for information on the recycling of Waste Electrical and Elec-

tronic Equipment.

Battery Recycling Statement.

The EC Directive on Batteries and Accumulators (2006/66/EC) aims to minimise the impact of batteries on the en-

vironment and encourage the recovery of the materials they contain. To achieve increased collection and recycling

of waste batteries, the Directive places ‘producer responsibility’ obligations on manufacturers and importers of

portable, industrial and automotive batteries.

The symbol shown below will be on all equipment fitted with batteries from 26th September 2008 and indicates

they must NOT be disposed of with other normal waste. Instead, it is the user’s responsibility to dispose of used

batteries by arranging to return them to a designated collection point for the correct recycling.

For more information about where you can send your waste batteries for recycling contact your local authority of-

fice.

REGISTERED IN ENGLAND REGISTERED NO. 1711515

REGISTERED OFFICE: BLOCK C 42 BARWELL BUSINESS PARK, CHESSINGTON, SURREY KT9 2NY

•For the IC board circuit inspections, only the use of a logic tester is

recommended. Using a Multi- Tester or General Purpose Tester may result

in damage to IC Circuits.

•Static electricity from your body may damage some electronics devices on

the IC board. Before handling the IC board, touch a grounded metallic

surface so that the static electricity can bedischarged.

•This video gaming cabinet utilises a motorised steering feedback system.

Do not attempt to service this part or any other part in close proximity to the

steering mechanism whilst power is applied.

•Some parts are not designed and manufactured specifically for this

game machine. The manufacturers may discontinue, or change the

specifications of such general-purpose parts. If this is the case, SEGA

cannot repair or replace a failed game machine whether or not a

warranty period hasexpired.

•Do not touch undesignated places. Touching places not designated can

cause electric shock or shortcircuit.

•Whenever any fasteners (e.g. screws, nuts) have been lost, be sure to use

replacement fasteners with proper dimensions as specified in this manual.

If fasteners of any other dimensions are used, it could cause damage

and/or separation of parts that result in secondaryaccidents.

•Specification changes, removal of equipment, conversion and/or

addition, not designated by SEGA are not permitted.

•Failure to observe this may cause a fire or an electric shock.

Noncompliance with this instruction can have a bad influence upon

physical conditions of the players or the onlookers, or result in injury

during play.

•SEGA shall not be held responsible for damage, compensation for

damage to a third party, caused by specification changes not

designated by SEGA.

•Performing work or parts replacements not described in this manual

could result in accidents. If you need to perform any work not listed in this

manual, request work from the office indicated in this manual or the point-

of-purchase, or inquires fordetails.

•Be sure to perform periodic maintenance inspections hereinstated.

CONCERNING THE STICKER DISPLAY

This SEGA product has stickers attached describing the product manufacture No. (Serial No.) andElectrical Specifi-

cations. Italso has a Sticker describing where to contact for repair andfor purchasing parts.

When inquiring about orasking for repairs, mention the Serial No. andName of Machine indicated onthe Sticker.

The Serial Number indicates the product register. Identical machines could have different parts depending onthe date

of production. Also, improvements and modifications might have been madeafter thepublication ofthis manu- al. In

order toensure you order the correct parts, mention the Serial No. when contacting the applicable places.

CONCERNING WARNING DISPLAYS

This SEGA product has warning displays onstickers, labels and/or printed instructions adhered/attached toorin-

corporated in the places where a potentially hazardous situation could arise. The warning displays are intended for

accident prevention for customers andfor avoiding hazardous situations relating tomaintenance and servicing work.

Some portions ofthe cabinet contain high voltage and may cause accidents iftouched. When performing mainte-

nance, be very careful ofthe warning displays. Itisespecially important that any complex repair andreplacement

work not mentioned herein should be performed bythose technical personnel who have knowledge of electricity and

technical expertise.

In order toprevent accidents, caution any customer ignoring the warnings tocease and desist immediately.

2PRECAUTIONS REGARDING INSTALLATION

•Be sure to check the Electrical Specifications. Ensure that this product is

compatible with the location's power supply, voltage, and frequency

requirements. A plate describing Electrical Specifications is attached to the

product. Noncompliance with the Electrical Specifications can cause a fireand

electric shock.

•This product requires a breaker and earth mechanism as part of the location

facilities. Using the product without these can cause a fire and electric shock.

•Ensure that the indoor wiring for the power supply is rated at 15 A or higher (AC

single phase 100 V ~ 120 V area), and 7 A or higher (AC 220 V ~ 240 V area).

Noncompliance with the Electrical Specifications can cause a fire and electric

shock.

•Be sure to use an independent power supply equipped with an earth leakage

breaker. Using a power supply without an earth leakage breaker can cause an

outbreak of fire if a power surgeoccurs.

•Putting many loads on one electrical outlet can cause generation of heat and

a fire resulting from overload.

•When using an extension cord, ensure that the cord is rated at 15 A or higher

(AC 100 V ~ 120 V area) and 7 A or higher (AC 220 V ~ 240 V area). Using a

cord rated lower than the specified rating can cause a fire and electric shock.

LIMITATIONS OF USAGE

•This product is an indoor game machine. Do not install it outside. Even indoors,

avoid installing in places mentioned below so as not to cause a fire, electric

shock, injury and/or malfunction.

•Places subject to rain or water leakage, or places subject to high humidity in

the proximity of an indoor swimming pool and/or shower, etc.

•Places subject to direct sunlight, or places subject to high temperatures in the

proximity of heating units,etc.

•Places filled with inflammable gas or vicinity of highly inflammable/volatile

chemicals or hazardous matter.

•Dusty places.

•Sloped surfaces.

•Places subject to any type of violent impact.

•Vicinity of anti-disaster facilities such as fire exits and fire extinguishers.

•Areas where the temperature exceeds the applicable temperature (ambient

temperature) range of 5 to 30 degreescentigrade.

Indice

Altri manuali Sega Macchina per videogiochi arcade

Sega

Sega Club Kart Prize Manuale utente

Sega

Sega Racing Classic Manuale utente

Sega

Sega D2 Manuale di riferimento

Sega

Sega Cows Might Fly Manuale utente

Sega

Sega Triple Play Manuale di istruzioni

Sega

Sega Crazy Taxi High Roller Supplemento

Sega

Sega THE KING OF ROUTE 66 Manuale utente

Sega

Sega SpongeBob SQUAREPANTS Manuale utente

Sega

Sega Grid 42 Manuale utente

Sega

Sega AFTER BURNER CLIMAX Manuale utente

Sega

Sega Lindbergh Universal Manuale utente

Sega

Sega ALL AIR TRIX DLX Manuale di riferimento

Sega

Sega Bass Fishing STD Manuale utente

Sega

Sega Nascar Arcade Mini Standard Manuale utente

Sega

Sega Luigi's Mansion Arcade Guida all'applicazione

Sega

Sega Derby Owners Club World Edition Manuale utente

Sega

Sega Mushiking Manuale utente

Sega

Sega Sonic Allstarts Kids Basketball Manuale utente

Sega

Sega SOUL SURFER Manuale utente

Sega

Sega Capcom vs SNK 2 Guida alla risoluzione dei problemi

Sega

Sega BEJEWELED Manuale utente

Sega

Sega GRID Racing DELUXE Manuale utente

Sega

Sega Olle King Manuale utente

Sega

Sega The House of the Dead 4 Manuale utente

Manuali Macchina per videogiochi arcade popolari di altre marche

Universal Space

Universal Space COCONUT BASH Manuale utente

Bay-Tek

Bay-Tek EVOLVE Manuale utente

Global VR

Global VR America's Army Istruzioni per l'installazione e il funzionamento

Atronic

Atronic Cashline Manuale utente

Universal Space

Universal Space Checky Monkey Manuale utente

Bay-Tek

Bay-Tek Skee Ball 1908 Alley Manuale utente

Aristocrat Technologies

Aristocrat Technologies Mars X Upright Manuale utente

Family Fun Companies

Family Fun Companies Reactor Guida rapida

Universal Space

Universal Space FRUIT MANIA Extreme Manuale utente

falgas

falgas CARRUSEL FIESTA Manuale utente

Konami

Konami DanceDanceRevolution Manuale utente

Bay-Tek

Bay-Tek quik drop Manuale utente

Bandai Namco

Bandai Namco PAC-MAN BATTLE ROYALE CHOMPIONSHIP DELUXE Manuale utente

Adrenaline

Adrenaline Flying Tickets Istruzioni per l'installazione e il funzionamento

Swinks

Swinks Stern Pinball Ghostbusters Manuale utente

Innovative Concepts in Entertainment

Innovative Concepts in Entertainment MONOPOLY ROLL-N-GO Manuale utente

jakar

jakar SPEED CARS Manuale utente

Carmelli

Carmelli HAT TRICK NG1015H Manuale utente