Segway 1689500001 Guida di riferimento

Customer Installable Parts

Upper Cargo Structure & Bag

e Series and i Series Models Only

Kit Number: 1689500001 Contents

·1 handlebar bag

·1 bag lid

·1 wire mounting frame

·1 control shaft clamp

·1 clamp screw

·2 button head screws

Specifications

·10 lb. maximum carrying capacity

·Polypropylene and polyethylene construction

·Polyester and mesh soft-sided pockets with cord locks

·Stainless steel snaps on bag lid

·Hook and loop attachment straps

·Powder-coated stainless steel wire mounting frame

Tools Required

·2.5mm hex wrench

·4mm hex wrench

WARNING

Always shut down your Segway HT and unplug the charge cord before performing any maintenance or installing any part or

accessory.

Follow these instructions carefully. Failure to follow these instructions carefully could damage your Segway HT and render it

unsafe to use.

Before you begin:

Do not use the parking stand to support the Segway HT while performing this procedure. The parking stand

is not designed to withstand the forces that may be generated. Instead, lay the Segway HT down on its back

side or support it with other objects so that you have easy access to the front of the handlebar and control

shaft.

Installation

Step 1

If present, remove the two button head

screws located on the bottom of the

handlebar using a 4mm hex wrench.

Step 2

Align the holes in the wire frame with the

screw locations in the bottom of the

handlebar so that the frame is on the front

side of the control shaft.

Step 3

Install the two button head screws through

the holes in the wire frame and into the

bottom of the handlebar using a 4mm hex

wrench and torque to 7.5 N-m.

Step 4

Install the clamp on the control shaft just

above the height adjustment collar with the

hook facing forward and up.

Note

Replace any fasteners you remove when performing this

installation with the new fasteners included in this kit .

Step 5

Slide the clamp up to the wire frame so that the wire frame rests in the hook.

Step 6

Install the clamp screw and with a 2.5mm hex wrench torque to 1.5 N-m. (The gap between the halves of the

clamp should be about 4mm.)

Step 7

Lightly tap the wire frame so that it snaps in the hook of the clamp.

Step 8

Drape the cargo bag over the handlebar so that the Display and Key Port are not obstructed.

Step 9

Secure the hook and loop straps around the wire frame at the bottom and sides of the bag.

LIMITED WARRANTY The Segway HT Upper Cargo Structure and Bag is an accessory covered by the SegwayTM

Human Transporter Limited Warranty (copy delivered with this kit).

Questions?

If you are missing a part, or if you need to return the product please contact Segway Customer

Service at 866.4SEGWAY (866.473.4929) or on our website at

www.segway.com/support/contact_us.html.

Indice

Altri manuali Segway Scooter

Segway

Segway 12.0 Handlebar Bag Manuale utente

Segway

Segway Ninebot eKickScooter Manuale utente

Segway

Segway eMoped C80 Manuale utente

Segway

Segway NINEBOT MINIPRO Manuale utente

Segway

Segway Ninebot KickScooter Manuale utente

Segway

Segway P65E Manuale utente

Segway

Segway P100SU Manuale utente

Segway

Segway KickScooter Manuale utente

Segway

Segway KickScooter P100SE Manuale utente

Segway

Segway Ninebot eKickScooter Manuale utente

Segway

Segway Personal Transporter i2 Manuale per l'uso e la cura

Segway

Segway Ninebot KickScooter Manuale utente

Segway

Segway NINEBOT ONE S1 Manuale utente

Segway

Segway GT Manuale utente

Segway

Segway XT Manuale utente

Segway

Segway Ninebot D18W Manuale utente

Segway

Segway x2 Turf Manuale operativo

Segway

Segway Ninebot KickScooter Air T15E Manuale utente

Segway

Segway GT Manuale utente

Segway

Segway i2 SE Manuale utente

Segway

Segway Ninebot KickScooter F25 Manuale utente

Segway

Segway Ninebot KickScooter F2 Series Manuale utente

Segway

Segway Ninebot KickScooter Manuale utente

Segway

Segway Ninebot S 2 Manuale utente

Manuali Scooter popolari di altre marche

TEKTRO

TEKTRO CHEETAH Manuale utente

Douglas

Douglas Vespa Sprint Guida all'installazione

PLAYTIVE

PLAYTIVE AS-2448 Manuale utente

Ebinger

Ebinger DONKEY XL Manuale utente

Flyer

Flyer Mountain Guida utente

BackCountry eBikes

BackCountry eBikes Storm Manuale utente

equipmed

equipmed FreeRoam II Manuale utente

Yoto

Yoto Lion Manuale utente

WESTHILL BIKES

WESTHILL BIKES LINK Manuale utente

BAnff

BAnff eProdigy series Manuale utente

Winther

Winther 475 Manuale utente

Jetson

Jetson JBZL17 Manuale utente

First Choice Mobility

First Choice Mobility Roma Medical Corella S741 Manuale utente

Carrera

Carrera impel Manuale utente

Afikim

Afikim Superlight SL-3 Manuale utente

CareCo

CareCo ZOOM Manuale utente

Douglas

Douglas Vespa G.S. Manuale utente

Gazelle

Gazelle with BOSCH System Manuale utente