SEH ISD300-PoE Manuale utente
Quick Installation Guide 1
Monday - Thursday
Friday
8:00 a.m. to 4:45 p.m. and
8:00 a.m. to 3:15 p.m. (CET)
℡+49 (0)521 94226-44
Intelligent Spooling Device
ISD300-PoE
Quick Installation Guide
Overview [en]
This Quick Installation Guide provides
a brief description of the installation
of the ISD300-PoE. It contains the
following information:
General Information
Safety Regulations
First Steps
ISD Quick Setup
ISD Software Package
Please note the table of contents on
page 3. Should you have any further
questions, please contact our support
hotline.
Überblick [de]
Dieser Quick Installation Guide be-
inhaltet eine kurze Beschreibung der
ISD300-PoE Installation. Sie erhalten
die folgenden Informationen:
Allgemeine Information
Sicherheitsvorschriften
Erste Schritte
ISD Quick Setup
ISD-Softwarepaket
Beachten Sie das Inhaltsverzeichnis
auf Seite 19. Falls Sie noch Fragen
haben, kontaktieren Sie unsere
Support-Hotline.
2 Quick Installation Guide
Date of Manufacture
The serial number includes the date of manufacture.
The serial number can be found on the type plate.
Quick Installation Guide [en] 3
2 General Information . . . . . . . . . . . . . . . . . . . . . . . . 4
Purpose. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Scope of Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
2 Safety Regulations. . . . . . . . . . . . . . . . . . . . . . . . . . 7
2 First Steps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Connecting the ISD300-PoE . . . . . . . . . . . . . . . . . . . .8
Switching the ISD300-PoE On/Off . . . . . . . . . . . . . . .9
ISD300-PoE Assigning TCP/IP Parameters . . . . . 10
Using the ISD Control Center . . . . . . . . . . . . . . . . . 12
2 ISD Quick Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2 ISD Software Package. . . . . . . . . . . . . . . . . . . . . . 16
Table of Contents
4 [en] Quick Installation Guide
General Information
Purpose
The ISD300-PoE was developed to spool and manage print jobs and to handle
print queues.
In complex networks with high volumes of data traffic and in large-scale
structures, the ISD300-PoE can substantially relieve server load and remove strain
from the network. This results in better performance and enhanced system
stability.
The ISD300-PoE adds server qualities to the printing in peer-to-peer networks.
Enhanced transparency, higher performance and the central management of all
print processes result in maximum efficiency and very little time required for
maintenance and system updates.
The ISD300-PoE is able to accept print jobs from various operating systems and
to forward them to the printer via Socket, LPD, or IPP.
Documentation
The ISD documentation consists of the following documents:
User Manual
Detailed description of the ISD configuration and administration. You
can find the PDF file at www.seh-technology.com or on the ISD hard
disk (see: 'Service-Area' 5).
Quick Installation Guide
The Quick Installation Guide contains information about security,
hardware installation, and the initial operation procedure of the ISD
.
(This document)
Online Help (ISD Control Center)
The Online Help contains detailed information about how to use the
ISD Control Center.
Online Help (SEH ISD Manager)
The Online Help contains detailed information about how to use the
software tool 'SEH ISD Manager'.
PDF
Printed
PDF
HTML
HTML
Quick Installation Guide [en] 5
Scope of Supply
Please check the package content before getting started.
ISD300-PoE
Intelligent Spooling Device 300 - Power over Ethernet
Quick Installation Guide
The Quick Installation Guide contains information about security,
hardware installation, and the initial operation procedure of the
ISD. (This document)
Service-Area
The service area is a defined memory area on the ISD hard disk.
The service area contains:
- ISD300 User Manual
- Quick Installation Guide ISD300-PoE (this document)
- SEH ISD Manager
- SEH Print Monitor
- ISD Printer Driver Wizard
- Driver Wizard Plugin 'CSR DLL'
Displaying the service area
The service area can be displayed via the ISD Control Center.
Start the ISD Control Center with the user profile 'Admin' and select
'Manuals & Tools'.
Note: To start the ISD Control Center follow the instructions in the
chapter 'First Steps' 8.
6 [en] Quick Installation Guide
Technical Data
Properties Values
Network connector logical:
physical:
- 10BaseT Ethernet (IEEE 802.3)
- 100BaseTX Fast Ethernet (IEEE 802.3)
- 1000BaseT Gigabit Ethernet Ethernet (IEEE 802.3)
- RJ-45 (STP cat. 5)
Interfaces 2 x USB 2.0 HS
Print protocols
Client ISD:
ISD printer: - LPD, SMB, Socket, IPP, ThinPrint®
- LPD, Socket, IPP
Supply voltage 48 VDC - Power over Ethernet -
The ISD receives the DC voltage directly from the STP cat. 5 cable
via the RJ-45 connector.
Current input 350 mA
Operating environment Ambient temperature: 5 - 30 °Celsius
Relative humidity 20 - 80 %
Dimensions - Length: 215 mm
- Height: 47 mm
- Width: 186 mm
Weight 1,450 g
Quick Installation Guide [en] 7
Safety Regulations
Before starting the initial setup procedure and during the operation of the ISD-
PoE, please note the following safety regulations. Their purpose is to protect
yourself and others from personal injuries, and avoid damage to the equipment.
CAUTION: Failure to follow these directions could result in bodily harm
or loss of life.
Basic Personal Security Precautions
Read the documentation and make sure that your system meets the
requirements listed therein.
Do not open the housing of the device. The ISD300-PoE may only be connected
and operated if the housing is not opened and if the ISD300-PoE is in perfect
condition.
Do not put objects on top of the housing.
Unauthorised modifications to the device can affect the product certification
and are forbidden.
Operating Environment Prerequisites
The ISD300-PoE must be placed on a solid surface with no vibration.
The ISD300-PoE must not be operated in dusty places and direct sunlight.
Avoid contact with humidity or liquids.
The ISD300-PoE may only be connected and operated if the installation
location meets the ambient conditions.
Security Precautions for Cabeling and Power Cords
Make sure that no-one steps on or stumbles over the cables.
Do not connect a telephone cable to the RJ-45 connector. The RJ-45
connector may only be connected to SELV voltages. For the connection to the
RJ-45 connector only STP cabling (category 5 or better) may be used. The
shielding must fit flushly to the connector.
Only use a certified USB Hi-Speed cable for the connection to the printer. You
will find a list of certified cables at www.usb.org!
Ambient temperature: 5 - 30 °Celsius
Relative humidity: 20 - 80 %
8 [en] Quick Installation Guide
First Steps
Connecting the ISD300-PoE
Proceed as follows:
1. Connect the network cable (RJ-45) to the network connector (2).
8
1) Activity LED (yellow):
The LED indicates the exchange of
network data packages.
2) Network connector (RJ-45 connector)
3) Link LED (green):
The LED indicates a (physical)
connection to the network.
4) Power LED
5) Display
6) Navigation keys
7) Soft power switch
8) USB connector
1234 5 6 7
Front view
Rear view
Quick Installation Guide [en] 9
Switching the ISD300-PoE On/Off
Switching the Device On
The ISD300-PoE system software boots automatically if the device receives the
power it needs. The power supply can be started by plugging in the network cable
or by turning on the PoE device (device that is used to supply power to the
ISD300-PoE).
Switching the Device Off
Print jobs that are processed while the ISD shuts down cannot be completed.
Print jobs that are stored in a queue will be completed when the device reboots.
To turn off the device, shut down the system software manually.
Booting/Shutting down the System Software
The system software can be booted/shut down manually.
To boot the software, press the soft power switch for a short moment.
To shut down the software, keep the soft power switch pressed for five
seconds.
What Happens in the Case of a Power Failure?
When the ISD receives again the necessary power, it takes on the same status as
before the power failure.
10 [en] Quick Installation Guide
ISD300-PoE Assigning TCP/IP Parameters
TCP/IP network protocols require the storing of the IP address in the ISD so that
the device can be addressed within the network and be configured via the ISD
Control Center.
You can assign the TCP/IP parameter manually or have it assigned automatically
via DHCP (Dynamic Host Configuration Protocol). The manually assignment is
default.
Assigning TCP/IP Parameters Manually
Use the navigation keys at the front of the device to assign the TCP/IP
parameters.
Proceed as follows:
1. Press . The display shows:
2. Press .
The display shows the current IP configuration ('Manual' or 'DHCP'):
3. Select 'Manual' via or and press to confirm.
The display shows:
4. Enter the IP address.
Use to navigate to individual numerical values within the IP address.
You can change the numerical values via .
5. Press to confirm. The display shows:
6. Enter the netmask.
7. Press to confirm. The display shows:
8. Enter the gateway.
IP Setup >
Cancel <
IP Configuration
Manual
IP Address:
000.000.000.000
Netmask:
000.000.000.000
Gateway:
000.000.000.000
Questo manuale è adatto per i seguenti modelli
1
Indice
Lingue:
Altri manuali SEH Hardware di rete
Manuali Hardware di rete popolari di altre marche
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manuale utente
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manuale utente
Yudor
Yudor YDS-16 Manuale utente
D-Link
D-Link ShareCenter DNS-320L Manuale utente
Samsung
Samsung ES1642dc Istruzioni per l’uso
Honeywell Home
Honeywell Home LTEM-PV Istruzioni per il montaggio
