Self-Sat WAVE Manuale utente
QUICK START GUIDE
Power input cable
Connection diagram
Package contents
CONTROLLER
MAIN UNIT
Controller cable
LAN cable
IMPORTANT : Read manual thoroughly for full safety and product information.
.
www.selfsat.com
1 x Main unit
1 x Controller
1 x Router
1 x PoE adaptor
2 x LAN cable
1 x Controller cable
1 x Power input cable
1 x Cable holder
1 x Cable gland
1 x Screw set
1 x User manual
LAN WAN Power
WLAN router
ENGLISH - 2
Parts of Main unit
Parts of Controller
• Front
• Back
OnLED Indicator
Power S/W
USB port
Satellite LEDs
TRACKING LED
LOCK LED Arrow buttons
SET button
1. Product specifications
BlinkingO
IDU cable to Main unit Power port
Antenna
Mounting plate
to Controller ("ANT" port)
to router
ENGLISH - 3
A. In-Motion mode (only)
For example :
2. Functional description
a.
b.
c.
d.
e.
f.
When the all cable connections are completed, turn on the power switch
ASTRA2 and HOTBIRD LEDs light on while booting the system (15~30 seconds)
Default (ASTRA2) or the last status satellite is automatically selected
Tracking LED light on since the unit searches the satellite
When Lock LED becomes solid this means the satellite is found
If the other satellite is desired, move to the correct satellite and press SET to
conrm the new satellite
B. Factory reset
a.
b.
c.
Press and hold SET button for more than 5 seconds till TRACKING & LOCK
LEDs blink
Factory reset takes less than 3 seconds and reboot the system
When factory reset is completed, default satellite is selected then the unit
automatically starts searching
ENGLISH - 4
A. Software upgrade - Controller
B. Software upgrade – Main board
3. Extra functions
a.
b.
c.
Transfer “FWUPDATE.BIN” le to a USB stick. Do not place inside a folder
Ensure that the unit is turned on and plug the USB into USB port of main
board (inside antenna)
Press and hold UPDATE button and then press RESET button
(There may be noise when pressing RESET button. It is not faulty.)
d.
e.
f.
g.
h.
Red and green LEDs are on while checking upgrade le
Software upgrade takes about 10 seconds
Once upgrade is completed, red LED is o and only green LED remains on
If main board does not recognise USB, red and green LED blink 5 times and
restart
If upgrade is failed, red LED blinks 5 times and restart
a.
b.
c.
d.
e.
f.
g.
h.
Transfer “FWUPDATE.BIN” le to a USB stick. Do not place inside a folder
Ensure that the unit is turned o and plug the USB into USB port on the
back of controller
Press and hold SET button and turn on the Power switch
MODE LED is on while checking upgrade le
Software upgrade takes about 10 seconds
(Each LED lights in sequence, all LEDs light on and then o)
Once upgrade is completed, unit reboot(reset) the system
If controller does not recognise USB, MODE /Tracking /Lock LEDs blink 6
times and restart
If upgrade is failed, all satellite LEDs blink till the unit is turned o
USB port
Reset button
Red & Green LED
Update button
ENGLISH - 5
4. Live Satellite Broadcasting with SELFSAT WAVE
Note) Channel scanning time can be dierent depending on your target satellite and
the number of channels.
Once you nished channel scanning for the rst time, you do not need to do it again.
When running an APP, there is two available SAT>IP server, please select.
SELFSAT WAVE client is either a software App or a STB-type device specialized for the IP
stream from SAT>IP.
SELFSAT WAVE is equipped of two SAT>IP routers, users are able to select one to be
connected.
Each router is capable to stream up to 16 users. Users should be grouped in two and guided
a router name to be connected.
For tablets or smart phones, download any of the SAT>IP Apps on the Apple APP Store or
Google Play.
Download a SAT>IP App from Apple App Store or Google Play.1.
Install the App on your iOS or Android device.
Wi-Fi Setting
Open the setting on your mobile device & Go to Wi-Fi setting to select the network.
⇒ For SELFSAT WAVE, use SSID “Idoit_wi_XX_5G_1” and password “idoit1234”.
2.
3.
Start the App.4.
How to download/use the App for iOS/Android Smartphones and Tablets
ELGATO SAT>IP (0.99 EUR)
**Recommended for more stable use with SAT>IP
tivizen SAT>IP (Free)
Elgato
Sat>IP
Satellite Setting
Watch TV
Setting → Scan Channels → Select Country → Select Satellite
→ Channel Auto Scan
Live TV → Select Satellite → Select the channel → Watch TV
tivizen
SAT>IP
Satellite Setting
Watch TV
Scan channels → New channel scan → Select satellite → OK
→ Save → Watch TV
Select the channel and watch TV
ENGLISH - 6
How to use ELGATO Sat>IP App
How to use tivizen SAT>IP App
Setting Scan Channels Auto Scan
Live TV Select the channel Watch TV
New channel scan Select Satellite Channel Scanning Watch TV
Select Country
Select Satellite
Scan
Select Satellite
ENGLISH - 7
5. Installation
Driving direction
Put aside the antenna to apply silicone inside
the guided tape line
Attach friction tape outside of the mounting
plate, to be 4mm away from the plate edge
4
2
FRONT
Clean the surface with cleaner
3
1
Locate the antenna in the center of car roof
ENGLISH - 8
8
6
Put back the mounting plate on the silicone
applied and make 2holes (2mm) with power drill
7
5
Apply silicone on the holes
Remove the friction tape and get dry
12
10
Apply silicone around the mounting plate
11
9
Tidy the area silicone applied
The image you will see. Place main unit on the
top of xed plate
Assemble mounting plate using 2 M4x20 screws
Re-apply silicone to cover tightened screws
ENGLISH - 9
Put the cable inside the cable holder as above
picture
Equipment to initiate cable holder installation
Fix cable holder on the car roof with 3 of M4x20
screws
19
Place cable holder in the tape marked and make
3 of 2mm drill holes
20
18
Apply silicone around the cable holder
Insert LAN and controller cable through the
hole
16
Arrange cable holder in front of (30cm apart
from) antenna center by facing open side of
cable holder toward projected part of the
mounting plate. Then attach friction tape
outside of cable holder
17
15
Make 15mm drill hole in the center of the tape
marking
1413
ENGLISH - 10
Apply silicone around and on the top of screws
21
Tidy silicon
Connect the cable to the controller and router
Remove friction tape
23 24
22
+
+
-
26
Get power input cable for battery connection
25
Match the power cables polarities to the battery
polarities, red to red / black to black
2827
Plug the other end of power input cable to the
controller Place the controller at where user wants
Indice
Altri manuali Self-Sat Antenna
Self-Sat
Self-Sat CAMP38 Manuale utente
Self-Sat
Self-Sat SNIPE 3 Manuale utente
Self-Sat
Self-Sat H35D SERIES Manuale utente
Self-Sat
Self-Sat CARAVAN MOBIL Manuale utente
Self-Sat
Self-Sat Snipe Dome Manuale utente
Self-Sat
Self-Sat H22dCSS+ Series Manuale utente
Self-Sat
Self-Sat Snipe Manuale utente
Self-Sat
Self-Sat H10D Manuale utente
Self-Sat
Self-Sat H50D Series Manuale utente
Self-Sat
Self-Sat MAM03D Foglio di istruzioni
Self-Sat
Self-Sat H10D Manuale utente
Self-Sat
Self-Sat SNIPE MOBIL CAMP DIRECT Manuale utente
Self-Sat
Self-Sat H21D2+ Manuale utente
Self-Sat
Self-Sat SELFSAT-H30D Series Manuale utente
Self-Sat
Self-Sat H21D Manuale utente
Self-Sat
Self-Sat PLUS Series Manuale utente
Self-Sat
Self-Sat SNIPE PLATINUM Manuale utente
Self-Sat
Self-Sat IP series Manuale utente
Self-Sat
Self-Sat H22D Series Manuale utente
Self-Sat
Self-Sat Snipe Manuale utente
Manuali Antenna popolari di altre marche
Alfa Network
Alfa Network APA-L01 Manuale utente
Naval
Naval PR-422CA Manuale utente
Feig Electronic
Feig Electronic ID ISC.ANTH200/200 Series Manuale utente
TERK Technologies
TERK Technologies TV44 Manuale utente
Directive Systems & Engineering
Directive Systems & Engineering DSE2324LYRMK Manuale utente
HP
HP J8999A Manuale utente
