3-way Switching Function
(for SLPU-2P1U1C1S-WL-NI/SLPU-2P1U1C1S-WL-WH/SLPU-2P1U1C1S-WL-BK ONLY)
Pairing
Unpair for 3-way version power units
1Power on Press power unit’s start button more than 3 seconds,
the blue indicator beside button starts flashing, Power unit enters paring mode.
Repeat same operation to another power unit.
Short press the button of any power unit, the blue indicator will
stop flashing and stay ON or OFF, means the pairing is successful.
press any paired power unit’s switch, all the lights that powered by paired
power units can be contolled.
flashing
flashing
stop flashing stop flashing
or
2
1Power on Press power unit’s start button more than 6 seconds,
until the blue indicator button starts flashing then stays ON,
means the unpairing is successful.
flashing
2
3 4
SELF Electronics USA Corporation
Tel: +1-770-248-9023
POWER UNIT
3s
3s
6s
or
a
b
