Seltron SCC40 Manuale utente

SCC30, SCC40

DEU Festwertregler

SCC30: 3 Ausgänge, 7 Eingänge

SCC40: 6 Ausgänge, 7 Eingänge

ENG Controller of constant return- pipe temperature

SCC30: 3 outputs, 7 inputs

SCC40: 6 outputs, 7 inputs

Controller of constant return- pipe temperature

SCC30, SCC40

Festwertregler

SCC30, SCC40

INTRODUCTION

Controllers SCC are modern designed, microprocessor-driven devices made with digital

and SMT technology.

These devices are intended for regulating the constant tempature for boiler return- pipe.

Controller of constant return- pipe temperature

SCC30, SCC40

For initial setup see Initial controller setup, page 8!

CONTENTS

USER MANUAL

Appearance of controller ........................................................................................7

Initial controller setup..............................................................................................8

Graphic LCD display ........................................................................................... 10

Description of symbols shown on the display ....................................................... 11

Display for help, notices and warnings...................................................................13

Menu entry and navigation .................................................................................. 14

Menu structure and description ............................................................................ 15

Temperature settings........................................................................................... 18

User functions .................................................................................................... 19

Operation mode selection .................................................................................... 20

Time program settings ........................................................................................ 21

Basic settings ...................................................................................................... 24

Data overview .................................................................................................... 26

SERVICE MANUAL

Controller parameters and auxiliary tools.............................................................. 27

Basic parameters............................................................................................. 27

Service parameters ......................................................................................... 29

Heat metering parameters ............................................................................... 32

Heat metering................................................................................................... 33

Parameters for available outputs programming ..................................................34

Factory settings .................................................................................................. 40

INSTALLATION MANUAL

Controller installation .......................................................................................... 41

Wall installation ................................................................................................... 41

Marking and description of temperature sensors .................................................. 42

Controller’s electric connection.............................................................................. 43

Flow meter installation ........................................................................................ 44

Temperature simulation mode...............................................................................44

Flow setup and test of RPM control.......................................................................44

Technical data...................................................................................................... 45

Disposal of old electrical and electronic equipment ................................................ 47

Hydraulic and electric schemes............................................................................. 90

User and settings manual

USER MANUAL

APPERANCE OF CONTROLLER

Graphic display

Button

(Esc - return back)

Button (Help)

Button

(move to left, decreasing)

Screw for fastening the cover

Button

(menu entry, confirmation of selection)

Button

(move to right, increasing)

Cover for connection area

User and settings manual 8

INITIAL CONTROLLER SETUP

SCC constant temperature controllers are equipped with an innovative solution, which

allows initial setup of the controller in only two steps.

When you connect the controller to the power supply for the first time, the software ver-

sion is shown. Next, the first step appears on the screen.

Using buttons and you select the required language.

Press the button to confirm the selected language.

After selecting the language, the controller requires

confirmation of the selection by pressing the

button.

If you accidentally selected the wrong language, go

back to reset the language by pressing button .

If you cannot find the required language on the first screen, move to the fol-

lowing screens by pressing the button .

STEP 1

User and settings manual

Selected hydraulic scheme can be later changed with service parameter S1.1.

Controller RESET!

Disconnect the controller from the power supply. Press and hold the button

and switch on power supply. The controller resets and goes to initial set-

up.

CAUTION!

By selecting ‘reset’ all previous controller settings are erased.

Next, you select a hydraulic scheme for the controller

function. Move between schemes by means of buttons

and .

Confirm the selected scheme by pressing the button.

STEP 2

After you selected the scheme, the controller requires

confirmation of the selection by pressing the button.

If you accidentally selected the wrong scheme, go back

to reset the scheme by pressing button .

User and settings manual 10

All important data of controller operation are shown on the graphic LCD display.

DESCRIPTION AND DESIGN OF THE MAIN DISPLAY:

For temperature and other data review we use buttons and .

Number of sensors and other data seen on the display depends on the selected hydraulic

scheme and controller settings.

Which data are shown on the basic display depends on the selected scheme.

If we want to change the displayed information, press button or

to select the required data and confirm it by holding button for 2 sec-

onds.

GRAPHIC LCD DISPLAY

Controller mode

Measured

temperatures,

state of output

and other data

Time

and

date

Advanced review of temperatures:

Measured temperature

Set point temperature

Warnings

State

of output

Diagram

of hydraulic

scheme

Measured

temperatures

Active functions

Active time program

Questo manuale è adatto per i seguenti modelli

Indice

Lingue:

Altri manuali Seltron Controllori

Seltron

Seltron KXD10B Manuale utente

Seltron

Seltron WXD10B Manuale utente

Seltron

Seltron Regulus RCD2 Manuale

Seltron

Seltron AHC40 Manuale utente

Seltron

Seltron ZCE6 Basic Manuale utente

Seltron

Seltron SGC36 Manuale utente

Seltron

Seltron SGC26 Manuale utente

Seltron

Seltron ACD20 Manuale utente

Manuali Controllori popolari di altre marche

Digiplex

Digiplex DGP-848 Istruzioni operative

YASKAWA

YASKAWA SGM series Manuale utente

Sinope

Sinope Calypso RM3500ZB Manuale utente

Isimet

Isimet DLA Series Style 2 Manuale di installazione

LSIS

LSIS sv-ip5a Manuale utente

Rockwell Automation

Rockwell Automation 1769-L31 Manuale utente

Airflow

Airflow Uno hab Manuale utente

ABB

ABB ACS580-01 drives Manuale utente

Panasonic

Panasonic GM1 Series Manuale utente

Emerson

Emerson SW93 Manuale utente

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuale utente

Panasonic

Panasonic FP? Positioning Unit RTEX Manuale utente

Samson

Samson Type 5824 Manuale di servizio

Alpha IP

Alpha IP MIOB 21001 Manuale utente

Siemens

Siemens OpenAir GMA 1 Series Manuale utente

Surecom

Surecom SR-629 Manuale utente

Fishman

Fishman TriplePlay Manuale utente

Regulus

Regulus SRS1 T Manuale utente