SEMPLICE SSH120 Manuale utente
SEMPLICE SSH120
INSTALLATION MANUAL
Scandinavian Brand Group DK
DIRECTIONAL SHOWER HOLDER
TECHNICAL FEATURES
Chromed Brass
Brushed Stainless Steel
White Finishing
Black Finishing
INSTALLATION RECOMENDATIONS
Before installing a tap, it is good to rinse the supply pipes to remove
all residues. We also recommend installing the taps with a lter.
The installation of the tap must be done with the surface clean and dry.
to perform the water pressure test, the taps must be open.
CLEANING AND MAINTENANCE
Cleaning must be done with liquid soap and water. Do not use liquid
detergents containing abrasive or acidic substances, abrasive sponges or
disinfectants. Incorrect cleaning may permanently ruin the surface of taps.
On color nishings, do not use products containing alcohol, acetone and
other solvents.
WARRANTY
Semplice Denmark guarantees all its products in case of manufacturing
defects, as follows:
5-year warranty:
Fusion or porosity defects;
Cartridge defects (the wear of this component depends on water quality);
Chrome plating defects (defects caused by maintenance errors are
excluded, please refer to cleaning instructions).
1-year warranty:
O-rings or ttings defects.
Defects on remaining nishes.
In order to use this warranty, please keep the invoice and attach it to this document.
Warranty grants the right of free replacement of parts that cause an irregular operation due to manufacturing defects,
in every cases in which malfunction is not caused by incorrect use, maintenance errors, irregular installation, assembly
made by unqualied people or reasons of force majeure.
Defective products must be sent to Semplice Denmark, with shipping expenses borne by the sender – this warranty
document and a copy of the purchase invoice must be attached to the package – where the products will be promptly
replaced and send back with shipping expenses borne by Semplice Denmark.
Non-compliance of this conditions will render the warranty null and void.
This warranty excludes any liabilities on the consequences arising from use or installation defects of Semplice Denmark
products.
Scandinavian Brand Group DK
FOR ASSEMBLY FOLLOW THE INDICATIONS OF THE DRAWING
TECHNICAL DATA
Nº DESCRIPTION
01 MAIN BODY
02 DIRECTIONAL HOLDER
03 UMBRAK KEY
04 UMBRAK SCREW
05 SCREW
06 SLEEVE
07 BEARING BUSH
Indice
Altri manuali SEMPLICE Apparecchio per il bagno
