SENAO SL-2511SR Manuale utente

Senao

2-Port Switch Wireless Router

UserGuide

Before operating the unit, please read this manual thoroughly, and retain it for future reference.

Model No. SL-2511SR

The contents of this publication may not be reproduced in any part or as a whole, stored,

transcribed in an information retrieval system, translated into any language, or transmitted

in any form or by any means, mechanical, magnetic, electronic, optical, photocopying,

manual, or otherwise, without the prior written permission.

Trademarks

All product, company, brand names are trademarks or registered trademarks of their

respective companies. They are used for identification purpose only. Specifications are

subject to be changed without prior notice.

-1-

FCC Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against radio interference in a commercial environment. This

equipment can generate, use and radiate radio frequency energy and, if not installed and

used in accordance with the instructions in this manual, may cause harmful interference to

radio communications. Operation of this equipment in a residential area is likely to cause

interference, in which case the user, at his own expense, will be required to take whatever

measures are necessary to correct the interference.

CE Declaration of Conformity

This equipment complies with the requirements relating to electromagnetic compatibility,

EN 55022/A1 Class B, and EN 50082-1. This meets the essential protection requirements

of the European Council Directive 89/336/EEC on the approximation of the laws of the

member states relation to electromagnetic compatibility.

-2-

Table of Contents

Chapter 1 Introduction...............................................................................4

Functions and Features.........................................................................4

1.2 Packing List....................................................................................5

Chapter 2 Hardware Installation................................................................6

2.1 Panel Layout...................................................................................6

2.2 Procedure for Hardware Installation ..............................................8

Chapter 3 Configuring Wireless Access Point.........................................11

3.1 Start-up and Log in.......................................................................11

3.2 System Info...................................................................................13

3.3 Toolbox.........................................................................................14

3.4 Primary Setup...............................................................................15

3.5 DHCP Server................................................................................18

3.6 MAC Address Control..................................................................20

Appendix A TCP/IP Configuration for Windows 95/98..........................23

A.1 Install TCP/IP Protocol into Your PC..........................................23

A.2 Set TCP/IP Protocol for Working with This Device....................25

A.3 Specifications...............................................................................32

A.4 Regulatory Compliance Information...........................................34

-3-

Chapter 1 Introduction

Congratulations on your purchase of this outstanding Wireless Access Point. This product

is specifically designed for Small Office and Home Office needs. It provides a solution for

building a LAN and sharing resources with or without wire, and is easy to configure and

operate even for non-technical users. Instructions for installing and configuring this

product can be found in this manual. Before you install and use this product, please read

this manual carefully for fully exploiting the functions of this product.

Functions and Features

 High speed for wireless LAN connection

11Mbps data rate by incorporating Direct Sequence Spread Spectrum (DSSS).

 Roaming

Provides seamless roaming within the IEEE 802.11b WLAN infrastructure.

 IEEE 802.11b compatible

Allowing inter-operation among multiple vendors.

 Auto fallback

11M, 5M, 2M, 1M data rate with auto fallback.

 Auto-sensing Ethernet Switch

Equipped with a 2-port auto-sensing Ethernet switch.

 DHCP server supported

All of the networked computers can retrieve TCP/IP settings automatically from

this product.

 Web-based configuring

Configurable through any networked computer’s web browser.

-4-

 MAC Address Access Control supported

Allows you to assign different access right for different users.

 Firmware Upgradable

Provides firmware upgrade via Web Browser or Windows Application.

1.2 Packing List

 Wireless Access Point unit

 Installation CD-ROM

 Power adapter

 CAT-5 UTP Fast Ethernet cable

-5-

Chapter 2 Hardware Installation

2.1 Panel Layout

2.1.1. Front Panel

Figure 2-1 Front Panel

LED:

LED Function Color Status Description

POWER Power indication Green On Power is being applied to this

product.

M1 System status 1 Orange Blinking This product is functioning

properly.

WLAN Wireless activity Green Blinking Sending or receiving data via

wireless

On An active station is connected to

the corresponding LAN port.

Link/Act.

1~2 Link status Green Blinking The corresponding LAN port is

sending or receiving data.

10/100 Data Rate Green On Data is transmitting in 100Mbps

on the corresponding LAN port.

Port:

RESET To reset system settings to factory defaults, please follow the steps:

1. Power off the device,

2. Press the reset button and hold,

3. Power on the device,

4. Keep the button pressed about 5 seconds,

5. Release the button,

6. Watch the M1 LED, they will flash 8 times and then M1 flash once

-6-

per second.

-7-

2.1.2. Rear Panel

Figure 2-2 Rear Panel

Ports:

Port Description

12VDC Power inlet: DC 12V, 1.5A (minimum)

Port 1-2 the ports where you will connect networked computers and other

devices.

Connector TNC connector

RS-232 RS-232 for ISDN/TAmodem

2.2 Procedure for Hardware Installation

1. Decide where to place your WirelessAccess Point

You can place your Wireless Access Point on a desk or other flat surface, or you can

mount it on a wall. For optimal performance, place your Wireless Access Point in the

center of your office (or your home) in a location that is away from any potential

source of interference, such as a metal wall or microwave oven.

-8-

2. Setup LAN connection

a. Wired LAN connection: connect an Ethernet cable from your computer’s Ethernet

port to one of the LAN ports (number 1-2) on the AP. Repeat the process to

connect other computers to the AP. If you need to connect more than two

computers to the AP, use a 10/100 Fast Ethernet switch (preferred) or hub and

connect the Ethernet cable from the AP to the switch/hub’s UPLINK port. You

may need to switch on the UPLINK feature on the switch/hub. The AP supports

up to 253 network computers and devices.

b. Wireless LAN connection: locate this product at a proper position to gain the best

transmits performance.

Figure 2-3 Setup of LAN connections for this product.

Note: If an UPLINK port is not available, simply connect a

crossover Ethernet cable from theAP to the switch/hub.

-9-

Indice

Altri manuali SENAO Router wireless

SENAO

SENAO NSR-1220-QG Manuale utente

Manuali Router wireless popolari di altre marche

Milesight

Milesight UG67 Manuale utente

Airlogic

Airlogic AirSync Class 1 Manuale del proprietario

Samsung

Samsung WCH730B Manuale utente

TELEFONICA

TELEFONICA USB Adapter Manuale utente

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Manuale utente

Askey

Askey RAC2V1K Manuale utente

Alloy

Alloy WLF2454AP-S Manuale utente

TP-Link

TP-Link TL-WR542G Manuale utente

NETGEAR

NETGEAR WNR2000v4 Manuale utente

Hama

Hama 53120 Manuale utente

Intellinet

Intellinet 524582 Manuale utente

Asus

Asus RT-N10P Manuale utente

D-Link

D-Link DIR-506L Manuale utente

Sapido

Sapido GR297n Manuale utente

Asus

Asus DSL-N55U Manuale utente

AMTC

AMTC WR7502 Manuale utente

Compaq

Compaq CP-2W - iPAQ Connection Point Manuale utente

SMC Networks

SMC Networks WBR14-N2 FICHE Manuale utente