Senix PDIX2-M2 Manuale utente
CORDLESS SCREWDRIVER
Operator’s manual
Model:PDIX2-M2
PDIX2-M2-0
For customer support, please call 1-800-261-3981 or send email to:
SAVE THIS MANUAL FOR FUTURE REFERENCE.
ORIGINAL INSTRUCTIONS
TM
EN - 2 WWW.SENIXTOOLS.COM
TABLE OF CONTENTS
SAFETY & INTERNATIONAL SYMBOLS ..................................................................................................................................2
SAFETY INSTRUCTIONS..........................................................................................................................................................3
KNOW YOUR UNIT...................................................................................................................................................................10
SPECIFICATIONS*...................................................................................................................................................................11
ASSEMBLY...............................................................................................................................................................................12
OPERATION.............................................................................................................................................................................14
MAINTENANCE........................................................................................................................................................................17
TROUBLESHOOTING..............................................................................................................................................................18
WARRANTY..............................................................................................................................................................................19
Caution / Warning.
To reduce the risk of injury, user must read
instruction manual.
Wear eye protection.
Wear a dust mask.
Wear safety footwear.
Wear protective gloves.
Do not dispose of battery packs in rivers or
immerse in water.
Do not dispose of battery packs in fire. They
will explode and cause injury.
Use and store the battery within an temperature
below 122°F(50°C).
Do not disassemble, crush, heat above
212°F(100°C); Never expose the battery to
microwaves or high pressures.
Keep bystanders a safe distance away from
the work area.
Indoor use only. Only use battery charger
indoors.
SAFETY & INTERNATIONAL SYMBOLS
Explanation of Safety & international symbols describes safety and international symbols and pictographs that may appear on
this product. Read the operator’s manual for complete safety, assembly, operating and maintenance and repair information.
3 - ENWWW.SENIXTOOLS.COM
GENERAL POWER TOOL SAFETY
WARNINGS
WARNING!
Read all safety warnings,
instructions, illustrations and
specifications, provided with this
power tool. Failure to follow all
instructions listed below may result
in electric shock, fire and/or serious
injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the
warnings refers to your mains-
operated (corded) power tool or
battery-operated (cordless) power
tool.
1) Work Area Safety
a) Keep work area clean and well
lit. Cluttered or dark areas invite
accidents.
b) Do not operate power tools
in explosive atmospheres,
such as in the presence of
flammable liquids, gases or
dust. Power tools create sparks
which may ignite the dust or
fumes.
c) Keep children and bystanders
away while operating a power
tool. Distractions can cause you
to lose control.
2) Electrical Safety
a) Power tool plugs must match
the outlet. Never modify the
plug in any way. Do not use
any adapter plugs with earthed
(grounded) power tools.
Unmodified plugs and matching
outlets will reduce risk of electric
shock.
b) Avoid body contact with
earthed or grounded surfaces,
such as pipes, radiators,
ranges and refrigerators. There
is an increased risk of electric
shock if your body is earthed or
grounded.
c) Do not expose power tools
to rain or wet conditions.
Water entering a power tool
will increase the risk of electric
shock.
d) Do not abuse the cord. Never
use the cord for carrying,
pulling or unplugging the
power tool. Keep cord away
from heat, oil, sharp edges
or moving parts. Damaged or
entangled cords increase the risk
of electric shock.
e) When operating a power tool
outdoors, use an extension
cord suitable for outdoor
use. Use of a cord suitable for
SAFETY INSTRUCTIONS
EN - 4 WWW.SENIXTOOLS.COM
with your finger on the switch or
energising power tools that have
the switch on invites accidents.
d) Remove any adjusting key
or wrench before turning the
power tool on. A wrench or a
key left attached to a rotating
part of the power tool may result
in personal injury.
e) Do not overreach. Keep
proper footing and balance at
all times. This enables better
control of the power tool in
unexpected situations.
f) Dress properly. Do not wear
loose clothing or jewellery.
Keep your hair and clothing
away from moving parts. Loose
clothes, jewellery or long hair
can be caught in moving parts.
g) If devices are provided for the
connection of dust extraction
and collection facilities,
ensure these are connected
and properly used. Use of
dust collection can reduce dust-
related hazards.
h) Do not let familiarity gained
from frequent use of tools
allow you to become
complacent and ignore tool
safety principles. A careless
action can cause severe injury
within a fraction of a second.
outdoor use reduces the risk of
electric shock.
f) If operating a power tool in a
damp location is unavoidable,
use a residual current device
(RCD) protected supply. Use
of an RCD reduces the risk of
electric shock.
3) Personal Safety
a) Stay alert, watch what you
are doing and use common
sense when operating a power
tool. Do not use a power tool
while you are tired or under
the influence of drugs, alcohol
or medication. A moment of
inattention while operating
power tools may result in serious
personal injury.
b) Use personal protective
equipment. Always wear
eye protection. Protective
equipment such as a dust mask,
non-skid safety shoes, hard
hat or hearing protection used
for appropriate conditions will
reduce personal injuries.
c) Prevent unintentional starting.
Ensure the switch is in the off-
position before connecting to
power source and/or battery
pack, picking up or carrying
the tool. Carrying power tools
5 - ENWWW.SENIXTOOLS.COM
4) Power Tool Use And Care
a) Do not force the power tool.
Use the correct power tool for
your application. The correct
power tool will do the job better
and safer at the rate for which it
was designed.
b) Do not use the power tool if
the switch does not turn it on
and off. Any power tool that
cannot be controlled with the
switch is dangerous and must be
repaired.
c) Disconnect the plug from the
power source and/or remove
the battery pack, if detachable,
from the power tool before
making any adjustments,
changing accessories, or
storing power tools. Such
preventive safety measures
reduce the risk of starting the
power tool accidentally.
d) Store idle power tools out of
the reach of children and do
not allow persons unfamiliar
with the power tool or these
instructions to operate the
power tool. Power tools are
dangerous in the hands of
untrained users.
e) Maintain power tools and
accessories. Check for
misalignment or binding of
moving parts, breakage of
parts and any other condition
that may affect the power
tool’s operation. If damaged,
have the power tool repaired
before use. Many accidents are
caused by poorly maintained
power tools.
f) Keep cutting tools sharp and
clean. Properly maintained
cutting tools with sharp cutting
edges are less likely to bind and
are easier to control.
g) Use the power tool,
accessories and tool bits
etc. in accordance with
these instructions, taking
into account the working
conditions and the work to be
performed. Use of the power
tool for operations different from
those intended could result in a
hazardous situation.
h) Keep handles and grasping
surfaces dry, clean and free
from oil and grease. Slippery
handles and grasping surfaces
do not allow for safe handling
and control of the tool in
unexpected situations.
5) Battery Tool Use And Care
a) Recharge only with the
charger specified by the
EN - 6 WWW.SENIXTOOLS.COM
in fire, explosion or risk of injury.
f) Do not expose a battery pack
or tool to fire or excessive
temperature. Exposure to fire or
temperature above 266°F(130
°C) may cause explosion.
g) Follow all charging
instructions and do not
charge the battery pack or tool
outside the temperature range
specified in the instructions.
Charging improperly or at
temperatures outside the
specified range may damage the
battery and increase the risk of
fire.
6) Service
a) Have your power tool
serviced by a qualified repair
person using only identical
replacement parts. This will
ensure that the safety of the
power tool is maintained.
b) Never service damaged battery
packs. Service of battery packs
should only be performed by
the manufacturer or authorized
service providers.
SAFETY RULES FOR
SCREWDRIVER
a) Hold power tools by insulated
gripping surfaces, when
manufacturer. A charger that is
suitable for one type of battery
pack may create a risk of fire
when used with another battery
pack.
b) Use power tools only with
specifically designated battery
packs. Use of any other battery
packs may create a risk of injury
and fire.
c) When battery pack is not in
use, keep it away from other
metal objects, like paper clips,
coins, keys, nails, screws or
other small metal objects,
that can make a connection
from one terminal to another.
Shorting the battery terminals
together may cause burns or a
fire.
d) Under abusive conditions,
liquid may be ejected from
the battery; avoid contact. If
contact accidentally occurs,
flush with water. If liquid
contacts eyes, additionally
seek medical help. Liquid
ejected from the battery may
cause irritation or burns.
e) Do not use a battery pack
or tool that is damaged
or modified. Damaged or
modified batteries may exhibit
unpredictable behaviour resulting
7 - ENWWW.SENIXTOOLS.COM
performing an operation where
the fastener may contact
hidden wiring. Fasteners
contacting a ″live″ wire will make
exposed metal parts of the
power tool ″live″ and could give
the operator an electric shock.
b) Maintain labels and
nameplates on the tool.
These carry important safety
information.
c) Avoid unintentional starting.
Prepare to begin work before
turning on the tool.
d) Do not lay the tool down until
it has come to a complete
stop. Moving parts can grab the
surface and pull the tool out of
your control.
e) When using a handheld power
tool, maintain a firm grip on
the tool with both hands to
resist starting torque.
f) Do not leave the tool
unattended when the battery
pack is connected. Turn off
the tool, and remove the battery
pack before leaving.
g) This product is not a toy. Keep
it out of reach of children.
SAFETY WARNING FOR BATTERY
PACK AND BATTERY CHARGER
• Recharge only with the charger
specified by the manufacturer. A
charger that is suitable for one
type of battery pack may create
a risk of fire when used with
another battery pack.
• Use appliances only with
specifically designated battery
packs. Use of any other battery
packs may create a risk of injury
and fire.
WARNING!
Use only the following type and size
battery: B25X2/B50X2.
• When battery pack is not in use,
keep it away from other metal
objects, like paper clips, coins,
keys, nails, screws or other small
metal objects, that can make a
connection from one terminal
to another. Shorting the battery
terminals together may cause
burns or a fire.
• Under abusive conditions,
liquid may be ejected from the
battery; avoid contact. If contact
accidentally occurs, flush with
water. If liquid contacts eyes,
additionally seek medical help.
Liquid ejected from the battery
may cause irritation or burns.
(This advice is considered
correct for conventional NiMh,
EN - 8 WWW.SENIXTOOLS.COM
VIBRATION + NOISE REDUCTION
To reduce the impact of noise and
vibration emission, limit the time of
operation, use low-vibration and low-
noise operating modes as well as
wear personal protective equipment.
Take the following points into
account to minimise the vibration
and noise exposure risks.
• Only use the product as
intended by its design and these
instructions.
• Ensure that the product is
in good condition and well
maintained.
• Use correct attachments for the
product and ensure they are in
good condition.
• Keep tight grip on the handles/
grip surface.
• Maintain this product in
accordance with these
instructions and keep it well
lubricated (where appropriate).
• Plan your work schedule to
spread any high vibration tool
use across a longer period of
time.
EMERGENCY
Familiarize yourself with the use
of this product by means of this
instruction manual. Memorize the
safety directions and follow them to
NiCd, lead acid and lithium-
ion cell types. If this advice
is incorrect for a cell design
that differs from these, then
the correct advice may be
substituted.)
• Do not use a battery pack or
appliance that is damaged
or modified. Damaged or
modified batteries may exhibit
unpredictable behavior resulting
in fire, explosion or risk of injury.
• Do not expose a battery pack or
appliance to fire or excessive
temperature. Exposure to
fire or temperature above
266°F(130°C) may cause
explosion.
• Follow all charging instructions
and do not charge the battery
pack or appliance outside of
the temperature range specified
in the instructions. Charging
improperly or at temperatures
outside of the specified range
may damage the battery and
increase the risk of fire.
• Do not modify or attempt to repair
the appliance or the battery
pack (as applicable) except as
indicated in the instructions for
use and care.
9 - ENWWW.SENIXTOOLS.COM
the letter. This will help to prevent
risks and hazards.
• Always be alert when using
this product, so that you can
recognize and handle risks early.
Fast intervention can prevent
serious injury and damage to
property.
• Switch off the product and
remove the battery pack if there
are malfunctions. Have the
product checked by a qualified
professional and repaired, if
necessary, before you operate it
again.
EN - 10 WWW.SENIXTOOLS.COM
KNOW YOUR UNIT
APPLICATIONS
Model: PDIX2-M2
As a cordless screwdriver:
Driving in or loosening screws and bolts.
NOTE:
PDIX2-M2-0 does not include charger and battery pack.
1
2
3
4
5
6
7
8
9
10
1. Chuck
2. Bit
3. Work Light
4. Switch Trigger
5. Control Panel
6. Unlock Button
7. Battery Pack
8. Belt Clip
9. Handle
10. Direction Selector
Questo manuale è adatto per i seguenti modelli
1
Indice
Lingue:
