Sensaphone 400 Manuale utente

SENSAPHONE®

Model 400

User’s Manual

Version 1.2.1

IMPORTANT SAFETY INSTRUCTIONS

Your Model 400 has been carefully designed to give you years

of safe, reliable performance. As with all electrical equipment,

however, there are a few basic precautions you should take to

avoid hurting yourself or damaging the unit:

• Read the installation and operating instructions in this

manual carefully. Be sure to save it for future reference.

• Read and follow all warning and instruction labels on the

product itself.

• To protect the Model 400 from overheating, make sure all

openings on the unit are not blocked. Do not place on or

near a heat source, such as a radiator or heat register.

• Do not use your Model 400 near water, or spill liquid of any

kind into it.

• Be certain that your power source matches the rating listed

on the AC power transformer. If you’re not sure of the type

of power supply to your facility, consult your dealer or local

power company.

• Do not allow anything to rest on the power cord. Do not

locate this product where the cord will be abused by persons

walking on it.

• Do not overload wall outlets and extension cords, as this can

result in the risk of fire or electric shock.

• Never push objects of any kind into this product through

ventilation holes as they may touch dangerous voltage points

or short out parts that could result in a risk of fire or electric

shock.

• To reduce the risk of electric shock, do not disassemble

this product, but return it to Sensaphone Customer Service,

or other approved repair facility, when any service or

repair work is required. Opening or removing covers may

expose you to dangerous voltages or other risks. Incorrect

reassembly can cause electric shock when the unit is

subsequently used.

• If anything happens that indicates that your Model 400

is not working properly or has been damaged, unplug it

immediately and follow the procedures in Appendix F for

having it serviced. Return the unit for servicing under the

following conditions:

iii

1. The power cord or plug is frayed or damaged.

2. Liquid has been spilled into the product or it has been

exposed to water.

3. The unit has been dropped, or the cabinet is damaged.

4. The unit doesn’t function normally when you’re

following the operating instructions.

• Avoid using a telephone (other than a cordless type) during

an electrical storm. There may be a remote risk of electric

shock from lightning.

• Do not use the telephone to report a gas leak in the vicinity

of the leak.

CAUTION

To Reduce the Risk of Fire or Injury to Persons, Read and Follow

these Instructions:

1. Use only the following type and size batteries:

Alkaline, size C.

2. Do not dispose of the batteries in a fire. The cell may

explode. Check with local codes for possible special disposal

instructions.

3. Do not open or mutilate the batteries. Released electrolyte is

corrosive and may cause damage to the eyes or skin. It may be

toxic if swallowed.

4. Exercise care in handling batteries in order not to short the

battery with conducting materials such as rings, bracelets, and

keys. The battery or conductor may overheat and cause burns.

5. Do not mix old and new batteries in this product.

Sensaphone®Model 400 User’s Manual

FCC Requirements

Part 68: The Sensaphone®Model 400 complies with Part 68 of the

FCC rules. On the back of the unit there is a label that contains,

among other information, the FCC Registration Number and the

Ringer Equivalence Number (REN) for this equipment. You must,

upon request, provide this information to your local telephone

company.

The REN is useful to determine the quantity of devices that you

may connect to your telephone line and still have all of those

devices ring when your telephone number is called. In most, but

not all areas, the sum of the RENs of all devices connected to

one line should not exceed five (5.0). To be certain of the number

of devices that you may connect to your line, you may want to

contact your local telephone company to determine the maximum

REN for your calling area.

This equipment may not be used on coin service provided by the

telephone company. Connection to party lines is subject to state

tariffs.

Should the Model 400 cause harm to the telephone network, the

telephone company may discontinue your service temporarily.

If possible, they will notify you in advance. But if advance

notice isn’t practical, the telephone company may temporarily

discontinue service without notice and you will be notified as

soon as possible. You will be informed of your right to file a

complaint with the FCC. The telephone company may make

changes in its facilities, equipment, operations, or procedures

where such action is reasonably required in the operation of its

business and is not inconsistent with the rules and regulations

of the FCC that could affect the proper functioning of your

equipment. If they do, you will be notified in advance to give you

an opportunity to maintain uninterrupted telephone service.

If you experience trouble with this equipment, or you need

information on obtaining service or repairs, please contact:

The telephone company may ask that you disconnect this

equipment from the network until the problem has been corrected

or until you are sure that the equipment is not malfunctioning.

Part 15: This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance

with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of

the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the

receiver.

• Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/television

technician for help.

Sensaphone®Model 400 User’s Manual

Canadian Department of Communications Statement

Notice: The Canadian Department of Communications label

identifies certified equipment. This certification means that the

equipment meets certain telecommunications network protective

operational and safety requirements. The Department does not

guarantee the equipment will operate to the user’s satisfaction.

Before installing this equipment, users should ensure that it

is permissible to be connected to the facilities of the local

telecommunications company. The equipment must also be

installed using an acceptable method of connection. In some

cases, where the company’s inside wiring is associated with

a single line, individual service may be extended by means

of a certified connector assembly (telephone extension cord).

The customer should be aware that compliance with the above

conditions may not prevent degradation of service in some

situations.

Repairs to certified equipment should be made by an authorized

Canadian maintenance facility designated by the supplier. Any

repairs or alterations made by the user to this equipment, or

equipment malfunctions, may give the telecommunications

company cause to request the user to disconnect the equipment.

Users should ensure for their own protection that the electrical

ground connections of the power utility telephone lines and

internal metallic water pipe system, if present, are connected

together. This precaution may be particularly important in rural

areas.

CAUTION: Users should not attempt to make such connections

themselves, but should contact the appropriate electric inspection

authority, or electrician, as appropriate.

The Load Number (LN) assigned to each terminal device denotes

the percentage of the total load to be connected to a telephone

loop which is used by the device to prevent overloading. The

termination on loop may consist of any combination of devices

subject only to the requirement that the total of the Load Numbers

of all the devices does not exceed 100. For the Sensaphone®

Model 400, the Load Number is 0.3.

vii

1 YEAR LIMITED WARRANTY

PLEASE READ THIS WARRANTY CAREFULLY BEFORE USING THE

PRODUCT.

THIS LIMITED WARRANTY CONTAINS SENSAPHONE’S STANDARD

TERMS AND CONDITIONS. WHERE PERMITTED BY THE

APPLICABLE LAW, BY KEEPING YOUR SENSAPHONE PRODUCT

BEYOND THIRTY (30) DAYS AFTER THE DATE OF DELIVERY, YOU

FULLY ACCEPT THE TERMS AND CONDITIONS SET FORTH IN THIS

LIMITED WARRANTY.

IN ADDITION, WHERE PERMITTED BY THE APPLICABLE LAW, YOUR

INSTALLATION AND/OR USE OF THE PRODUCT CONSTITUTES FULL

ACCEPTANCE OF THE TERMS AND CONDITIONS OF THIS LIMITED

WARRANTY (HEREINAFTER REFERRED TO AS “LIMITED WARRANTY

OR WARRANTY”). IF YOU DO NOT AGREE TO THE TERMS AND

CONDITIONS THIS WARRANTY, INCLUDING ANY LIMITATIONS OF

WARRANTY, INDEMNIFICATION TERMS OR LIMITATION OF LIABILITY,

THEN YOU SHOULD NOT USE THE PRODUCT AND SHOULD RETURN

IT TO THE SELLER FOR A REFUND OF THE PURCHASE PRICE.

THE LAW MAY VARY BY JURISDICTION AS TO THE APPLICABILITY

OF YOUR INSTALLATION OR USE ACTUALLY CONSTITUTING

ACCEPTANCE OF THE TERMS AND CONDITIONS HEREIN AND

AS TO THE APPLICABILITY OF ANY LIMITATION OF WARRANTY,

INDEMNIFICATION TERMS OR LIMITATIONS OF LIABILITY.

1. WARRANTOR: In this Warranty, Warrantor shall mean “Dealer,

Distributor, and/or Manufacturer.”

2. ELEMENTS OF WARRANTY: This Product is warranted to be free from

defects in materials and craftsmanship with only the limitations and exclu-

sions set out below.

3. WARRANTY AND REMEDY: One-Year Warranty — In the event that

the Product does not conform to this warranty at any time during the time of

one year from original purchase, warrantor will repair the defect and return

it to you at no charge.

This warranty shall terminate and be of no further effect at the time the

product is: (1) damaged by extraneous cause such as fire, water, lightning,

etc. or not maintained as reasonable and necessary; or (2) modified; or (3)

improperly installed; or (4) misused; or (5) repaired or serviced by someone

other than Warrantors’ authorized personnel or someone expressly autho-

rized by Warrantor’s to make such service or repairs; (6) used in a manner

or purpose for which the product was not intended; or (7) sold by original

purchaser.

Sensaphone®Model 400 User’s Manual

viii

LIMITED WARRANTY, LIMITATION OF DAMAGES AND DISCLAIMER

OF LIABILITY FOR DAMAGES: THE WARRANTOR’S OBLIGATION

UNDER THIS WARRANTY IS LIMITED TO REPAIR OR REPLACEMENT

OF THE PRODUCT, AT THE WARRANTOR’S OPTION AS TO REPAIR

OR REPLACEMENT. IN NO EVENT SHALL WARRANTORS BE

LIABLE OR RESPONSIBLE FOR PAYMENT OF ANY INCIDENTAL,

CONSEQUENTIAL, SPECIAL AND/OR PUNITIVE DAMAGES OF

ANY KIND, INCLUDING BUT NOT LIMITED TO ANY LABOR COSTS,

PRODUCT COSTS, LOST REVENUE, BUSINESS INTERRUPTION

LOSSES, LOST PROFITS, LOSS OF BUSINESS, LOSS OF DATA

OR INFORMATION, OR FINANCIAL LOSS, FOR CLAIMS OF ANY

NATURE, INCLUDING BUT NOT LIMITED TO CLAIMS IN CONTRACT,

BREACH OF WARRANTY OR TORT, AND WHETHER OR NOT

CAUSED BY WARRANTORS’ NEGLIGENCE. IN THE EVENT THAT

IT IS DETERMINED IN ANY ADJUDICATION THAT THE LIMITED

WARRANTIES OF REPAIR OR REPLACEMENT ARE INAPPLICABLE,

THEN THE PURCHASER’S SOLE REMEDY SHALL BE PAYMENT TO

THE PURCHASER OF THE ORIGINAL COST OF THE PRODUCT, AND

IN NO EVENT SHALL WARRANTORS BE LIABLE OR RESPONSIBLE

FOR PAYMENT OF ANY INCIDENTAL, CONSEQUENTIAL, SPECIAL

AND/OR PUNITIVE DAMAGES OF ANY KIND, INCLUDING BUT NOT

LIMITED TO ANY LOST REVENUE, BUSINESS INTERRUPTION

LOSSES, LOST PROFITS, LOSS OF BUSINESS, LOSS OF DATA OR

INFORMATION, OR FINANCIAL LOSS, FOR CLAIMS OF ANY NATURE,

INCLUDING BUT NOT LIMITED TO CLAIMS IN CONTRACT, BREACH

OF WARRANTY OR TORT, AND WHETHER OR NOT CAUSED BY

WARRANTORS’ NEGLIGENCE.

WITHOUT WAIVING ANY PROVISION IN THIS LIMITED WARRANTY,

IF A CIRCUMSTANCE ARISES WHERE WARRANTORS ARE FOUND

TO BE LIABLE FOR ANY LOSS OR DAMAGE ARISING OUT OF

MISTAKES, NEGLIGENCE, OMISSIONS, INTERRUPTIONS, DELAYS,

ERRORS OR DEFECTS IN WARRANTORS’ PRODUCTS OR SERVICES,

SUCH LIABILITY SHALL NOT EXCEED THE TOTAL AMOUNT PAID BY

THE CUSTOMER FOR WARRANTORS’ PRODUCT AND SERVICES

OR $250.00, WHICHEVER IS GREATER. YOU HEREBY RELEASE

WARRANTORS FROM ANY AND ALL OBLIGATIONS, LIABILITIES AND

CLAIMS IN EXCESS OF THIS LIMITATION.

INDEMNIFICATION AND COVENANT NOT TO SUE: YOU WILL

INDEMNIFY, DEFEND AND HOLD HARMLESS WARRANTORS,

THEIR OWNERS, DIRECTORS, OFFICERS, EMPLOYEES, AGENTS,

SUPPLIERS OR AFFILIATED COMPANIES, AGAINST ANY AND ALL

CLAIMS, DEMANDS OR ACTIONS BASED UPON ANY LOSSES,

LIABILITIES, DAMAGES OR COSTS, INCLUDING BUT NOT LIMITED

TO DAMAGES THAT ARE DIRECT OR INDIRECT, INCIDENTAL,

SPECIAL OR CONSEQUENTIAL, AND INCLUDING ATTORNEYS

FEES AND LEGAL COSTS, THAT MAY RESULT FROM THE

INSTALLATION, OPERATION, USE OF, OR INABILITY TO USE

WARRANTORS’ PRODUCTS AND SERVICES, OR FROM THE FAILURE

OF THE WARRANTORS’ SYSTEM TO REPORT A GIVEN EVENT

OR CONDITION, WHETHER OR NOT CAUSED BY WARRANTORS’

NEGLIGENCE.

YOU AGREE TO RELEASE, WAIVE, DISCHARGE AND COVENANT NOT

TO SUE WARRANTORS, THEIR OWNERS, DIRECTORS, OFFICERS,

EMPLOYEES, AGENTS, SUPPLIERS OR AFFILIATED COMPANIES,

FOR ANY AND ALL LIABILITIES POTENTIALLY ARISING FROM ANY

CLAIM, DEMAND OR ACTION BASED UPON ANY LOSSES, LIABILITIES,

DAMAGES OR COSTS, INCLUDING BUT NOT LIMITED TO DAMAGES

THAT ARE DIRECT OR INDIRECT, INCIDENTAL, SPECIAL OR

CONSEQUENTIAL, AND INCLUDING ATTORNEYS FEES AND LEGAL

COSTS, THAT MAY RESULT FROM THE INSTALLATION, OPERATION,

USE OF, OR INABILITY TO USE WARRANTORS’ PRODUCTS AND

SERVICES, OR FROM THE FAILURE OF THE WARRANTORS’ SYSTEM

TO REPORT A GIVEN EVENT OR CONDITION, WHETHER OR NOT

CAUSED BY WARRANTORS’ NEGLIGENCE, EXCEPT AS NECESSARY

TO ENFORCE THE EXPRESS TERMS OF THIS LIMITED WARRANTY.

EXCLUSIVE WARRANTY: THE LIMITED WARRANTY OR WARRANTIES

DESCRIBED HEREIN CONSTITUTE THE SOLE WARRANTY OR

WARRANTIES TO THE PURCHASER. ALL IMPLIED WARRANTIES

ARE EXPRESSLY DISCLAIMED, INCLUDING: THE WARRANTY

OF MERCHANTABILITY AND THE WARRANTY OF FITNESS

FOR A PARTICULAR USE AND THE WARRANTY OF FITNESS

FOR A PARTICULAR PURPOSE AND THE WARRANTY OF NON-

INFRINGEMENT AND/OR ANY WARRANTY ARISING FROM A COURSE

OF DEALING, USAGE, OR TRADE PRACTICE.

It must be clear that the Warrantors are not insuring your premises or

business or guaranteeing that there will not be damage to your person or

property or business if you use this Product. You should maintain insur-

ance coverage sufficient to provide compensation for any loss, damage, or

expense that may arise in connection with the use of products or services,

even if caused by Warrantors’ negligence. The warrantors assume no

liability for installation of the Product and/or interruptions of the service due

to strikes, riots, floods, fire, and/or any cause beyond Seller’s control, fur-

ther subject to the limitations expressed in any License Agreement or other

Agreement provided by Warrantors to purchaser.

The agreement between the Warrantors and the Purchaser, including but

not limited to the terms and conditions herein shall not be governed by

the Convention for the International Sale of Goods. Where applicable,

the Uniform Commercial Code as adopted by the State of Delaware shall

apply.

4. PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: In

the event that the Product does not conform to this warranty, the Product

should be shipped or delivered freight prepaid to a Warrantor with evidence

of original purchase.

Sensaphone®Model 400 User’s Manual

Altri manuali per 400

Indice

Altri manuali Sensaphone Sistema di sicurezza

Sensaphone

Sensaphone 1104 Manuale utente

Manuali Sistema di sicurezza popolari di altre marche

Inner Range

Inner Range Concept 2000 Manuale utente

Climax

Climax Mobile Lite R32 Istruzioni per il montaggio

CADDX

CADDX NX-6 Manuale utente

FBII

FBII XL-31 Series Manuale utente

Johnson Controls

Johnson Controls PENN Connected PC10 Manuale utente

Aeotec

Aeotec Siren Gen5 Manuale utente

Blaupunkt

Blaupunkt SA 2700 Manuale utente

IDEAL

IDEAL Accenta Manuale del proprietario

AJAX

AJAX DoubleButton Manuale utente

Swann

Swann SW-P-MC2 Manuale utente

Ecolink

Ecolink Siren+Chime Manuale utente

Digital Monitoring Products

Digital Monitoring Products XR150 Manuale utente

EDM

EDM Solution 6+6 Wireless-AE Manuale utente

Highway Safety Group

Highway Safety Group EA401 Manuale utente

Siren

Siren LED GSM Manuale utente

Detection Systems

Detection Systems 7090i Istruzioni per il montaggio

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuale utente

Siemens

Siemens FDM273 Manuale utente