sensbi SENTRI Manuale utente
QUICK
GUIDE
Smart Camera
SENTRI
SCAN QR CODE FOR DETAILED INSTRUCTIONS
SKENIRAJTE QR KOD ZA DETALJNA UPUTSTVA
SKENIRAJTE QR KOD ZA DETALJNE UPUTE
ZA PODROBNA NAVODILA SKENIRAJTE QR KODO
sensbi.com
What's in the box
1
Please consult this checklist for all parts.
User Manual
Bracket
Bracket screws
Mounting bracket
Pin
Hex screwdriver
Waterproof terminal Screwdriver
Sensbi SENTRI
A x 3 B x 3
C x 3
Description
2
Reset
SD card
slot
PIR & Status light
MIC
Lens
Light
PEL
N
Power
Status light
AC 100~240V
Solid red light on: network is malfunctional
Blinking red light: wait for network connection (slow blinking)
connecting the network (fast blinking)
Solid blue light on: camera is working correctly
Capture sounds for your video
Support local SD Card storage (Max.128G)
Press and hold the 'RESET' for 5 seconds to reset the device
(if you have modified settings, they will return to factory
defaults)
Microphone
SD card slot
Light
Turn the light on/off manually or automatically
Reset
Installation
3
WARNING
Waterproof terminal
100~240V AC
Bracket
Mounting Bracket
Screw C
1. AC100~240V power connection.
2. Disconnect the power to the fuse or circuit breaker before installation.
3. When connecting N, L and PE wires, make sure not to twist the copper parts
of the wires to each other; otherwise the camera will short-circuit which can
cause safety hazards such as electric shock.
*
Screw A+B
* To connect the camera with the bracket:
1. Loosen this two screws with the included screwdriver.
2. Insert the camera to the bracket.
3. Tighten the screws.
A
B
C
Connection of waterproof terminal
Angle adjustment
A. Fix the camera
B. Adjust the angle
C. Adjust the direction and fix the camera.
N
L
Part A
1. Loosen the screws of Part A. ( The red boxes)
2. Insert the N, L and PE wires of camera and power to the holes of Part A.
Note: The wires should be inserted according to icons; otherwise the camera
will short-circuit which can cause safety hazards such as electric shock.
3. Tighten the screws of Part A. ( The red boxes)
Installation
4
5
Set up router
The router supports the 2.4GHz WiFi (doesn't support the 5GHz), and is
connected to the WiFi network.Please set the parameters of the router
before connecting the WiFi network, and record the SSID and password
of your WiFi.
Please keep network available
2.4GHz 5GHz
Connection
Download
Sensbi app is available for both iOS and Android OS. Search the name ‘SENSBI’
in App Store or Google Play.
Q: Why is it still in the list of devices after reseting?
A: The reset device only resets the network configuration of the camera,
but cannot change the configuration on the App, remove the camera,
and must be deleted by the App.
Q: How to cut the camera network to another router?
A: First remove and reset the device on the App and then configure the
device again by the App.
Q: Why doesn't the device identify the SD card?
A: It is recommended to plug in SD card after power cut. Confirm whether
the SD card is normally available and the format is FAT32. And the TF
card can’t be identified when the internet environment is not good.
Q: Why I can’t get the notifications with my cell phone App?
A: Please confirm that the App has been running on the phone, and the
relevant reminder function has been opened;Message notification and
authority confirmation in the mobile phone system have been opened.
Q: The device cannot be previewed properly?
A: Check whether the network is normal, you can place the camera close
to the router, and if not, it is recommended to reset the device and add
it again.
FAQ
6
Functions
7
Day Night
Record
Record every moment using high capacity SD card storage.
Day & Night
Powerful night vision means no interruptions, even in complete darkness.
Two-way audio
You can see and hear the vistor in your App from the camera.
PIR
When someone passes by, an alarm will be triggered and sent to your
phone.
Light controlling
You can turn on or turn off the light by App.
Indice
Lingue:
Altri manuali sensbi Telecamera di sicurezza
