MAINTENANCE AND CLEANING
The headset is an active hearing protector that allows audible contact with
your surroundings while providing protection from harmful noise.
It is recommended that the headset is fitted, adjusted, and maintained
in accordance with these instructions. This headset should alwaysbeworn
in noisy surroundings. The headset should be regularly inspected for
serviceability.
Warning:
•
If these instructions are not followed the protection of the
headset will be severely impaired.
•
Noise reduction will be adversely affected by anything that
impairs the seal of the earmuff cushions against the head,
such as thick spectacle frames and balaclavas
•
The reported attenuation will be obtained only if the headset
is in good condition and worn as directed (Refer to AS/NZS
1269.3 for guidance).
•
This product should not be used where there is a risk that the
connecting cord could be caught up during use.
•
This product is provided with level-dependent in-ear audio
playback. The wearer should check correct operation before
use. If distortion, or failure is detected. The wearer should
refer to the manufacturer’s advice for maintenance and/or
replacement.
Warning:
•
Performance may deteriorate with battery usage.
The typical period of continuous use that can be
expected from the headset will depend on the two-
way radio battery.
•
The output of the level-dependent circuit of this hearing
protector may exceed the daily limit sound level. This limit
can be adjusted with a Sensear programming tablet.
•
This headset has been tested and approved according to
the methods described in the EN352 series of standards.
SM1R Technical Information
8
