SensoScientific Sub-1 GHz Series Manuale utente

USB-C Wall Charger

(If Purchased)

Ethernet Cable Zip Ties or Mounting Tape

Sub-1 GHz Sensor Sub-1 GHz Gateway Sub-1 GHz External Screen

(If Purchased)

Probe(s) (2) AA 1.5 V Lithium Batteries Solid Thermal Buﬀer

(If Purchased)

Quick Setup Guide

Sub-1 GHz Series

Unpack Box Please verify shipped items match what was ordered

2.1 Plug in Gateway &

Connect to Network

Turn on the gateway by plugging in the USB-C

power supply. Insert one end of the ethernet outlet

and the other end into the gateway to connect to the

network.

NOTE: Please contact the Techinical Support team for

assistance with ﬁrewall settings.

2.2 Change Sensor

Batteries

Using the battery key or ﬂathead screwdriver, open

the battery compartment and insert 2 AA 1.5V

lithium batteries. (Optional) A power cord can be

connected to preserve battery life if purchased.

2.3

Turn the Sensor On

Press the power button then press the “B” button

on the sensor. A blue light will turn on to conﬁrm the

power is on. The sensor will automatically connect to

the nearest gateway.

2.4

Connect the Probe

If you purchased the solid thermal buﬀer, screw the

top oﬀ the buﬀer and place the probe inside. Slide

the probe’s wire into the top’s opening and screw the

top onto the buﬀer. Insert the probe & buﬀer into

the side of the sensor and connect the M8 to port 1.

Gateway & Sensor Setup

Install Device to Storage Unit

3.1 Select the Optimal Location

for the Sensor

Location should be toward the middle of the

chamber where airﬂow is most consistent and

ﬂuctuations are least prominent.

3.2 Use Zip Ties or Mounting Tape

to Secure Senor to Shelp

Using zip ties, secure the sensor to the underside of

the determined shelf. If using mounting tape, clean

the surface of the determined location then attach

the sensor.

3.3 (If Purchased) Place External

Display in Area of High Visibility

Mount the external display to the area of choice

using the magnetic backing or tabletop stand.

Establish Cloud Settings Log in to your account at: cloud.sensosubg.com

Save











°F





































 











Node MAC Address

Node ID



User

Group







Nodes











   

 











Guest  



Guest  



Guest  



Guest  



























Nodes

User

Group





Save

4.1 Establish the Global

Account Settings

ASelect the “CONFIGURATION” tab in the main

menu.

BSelect the “Settings” tab in the submenu.

C The submenu will reveal new options. Select

the “Conﬁgure” tab.

DEstablish the desired settings and click the

“Save” button at the bottom of the page.

4.2 Configure the Sensor’s

Operation Settings

ASelect the “CONFIGURATION” tab in the main

menu.

BSelect the “Devices” tab in the submenu.

C The submenu will reveal new options. Select

the “Conﬁgure” tab.

D Click the “Conﬁgure” button of the desired

node. (Not Displayed)

EEstablish the desired settings and click the

“Save” button at the bottom of the page.

NOTE: Refer to section “IV. Node Conﬁguration” in the

Cloud Manual for more information on ﬁeld

meanings.

HELP > User Guide/Installation Docs > Cloud User

Manual.pdf

Establish Cloud Settings Log in to your account at: cloud.sensosubg.com







demo







Group







Nodes

User



























































































Group







Nodes

User



ure



4.3 Create New User’s

Personal Profile

ASelect the “CONFIGURATION” tab in the main

menu.

BSelect the “User” tab in the submenu.

CThe submenu will reveal new options. Select

the “New User” tab.

DEstablish the desired settings and click the

“Add New User” button at the bottom of the

page.

NOTE: Refer to section “IV.3 Create/Delete User

Accounts” in the Cloud Manual for more information

on ﬁeld meanings.

HELP > User Guide/Installation Docs > Cloud User

Manual.pdf

4.4

Assign Nodes to Users

ASelect the “CONFIGURATION” tab in the main

menu.

BSelect the “User” tab in the submenu.

CThe submenu will reveal new options. Select

the “Add/Remove Node” tab.

DSelect the user you want to assign nodes and

click the “Add Nodes to User” button.

EMark the check box in the rightmost column

of the desired nodes. Click the “Add Node”

button to assign the selected Node(s) to the

user. (Not Displayed)

NOTE: Nodes must be assigned to users for them to

display on the “MONITORING” tab.

System Overview

Gateway Sensor

1Gateway Antenna

2USB-C Power Adapter Port

3(2) Micro-USB Ports

4A/C Port

5(2) USB Type A Ports

6(2) USB 3.0 Ports

7Ethernet Port

8 Solid Thermal Buﬀer

9B Button

10 A Button

11 USB-C Power Adapter Port

12 On/Oﬀ Power Button

13 Battery Compartment

14 M8 Port 1

15 M8 Port 2

16 Reset Button

System Overview

External Display ScreenExternal Display

24 External Display Information

25 Sensor Information

26 External Display Identiﬁers

27 Firmware Version

Audible Alarm On / Oﬀ

Alarm Indicator: Assigned sensor is alarmed

Power Supply: Device is connected to external power

Battery Level

Network Connected / Disconnected

Internet Connected / Disconnected

Cloud Connected / Disconnected

Buﬀering: Appears when data is uploading to cloud

28 Sensor Identiﬁers

29 Alarm Indicator: Current sensor is alarmed

30 Current, Min/Max Readings

31 Date & Time of Last Reading

32 24 hr Data Graph

17 External Display Screen

18 Button

19 Speaker

20 USB-C Power Supply

21 Light Indicator

22 B Button

23 A Button

Warning:

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the

user’s authority to operate the equipment.

NOTE:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

FCC Statement:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help.

Indice

Manuali Sensore di sicurezza popolari di altre marche

THORLABS

THORLABS PDA10JT Manuale utente

Waeco

Waeco UV-DETECT Manuale utente

Intermatic

Intermatic IOS-DSIMF Manuale utente

urmet domus

urmet domus 1083 Manuale utente

Siemens

Siemens AZL66 Series Manuale utente

BTI

BTI Profiline Multi Finder Manuale utente

Challenger

Challenger SL01 Manuale utente

DMP Electronics

DMP Electronics 1122INT Manuale utente

Rielta

Rielta Ladoga MK-RK Manuale utente

Mirion Technologies

Mirion Technologies ACCURAD PRD Manuale utente

Bosch

Bosch DS835 Manuale utente

DBI SALA

DBI SALA EZ Stop Manuale dell'operatore

Lamptime

Lamptime ST05C Manuale utente

Ubiquiti

Ubiquiti MFI-MSC Manuale utente

Subsite

Subsite 910R Istruzioni per l'installazione

Satel

Satel OPAL Pro Manuale utente

Aleph

Aleph XC-1XTEU Manuale utente

Pima

Pima LARIS QUAD Manuale utente