SensoScientific OTA Series Manuale utente

OTA Series

User Guide

V1.02

 
OTA Series User Guide 1
Contents 
OTA Series....................................................................................................2
Getting to Know Your Device ........................................................................2
SensoScientific Cloud ...................................................................................3
Setting Up Your Device: App.........................................................................4
Step 1 –Download App.............................................................................4
Step 2 –Set Device to Provisioning Mode ................................................5
Step 3 –Connect to Wi-Fi..........................................................................6
Step 4 –Configure Wi-Fi ...........................................................................8
Setting Up Your Device: Browser................................................................10
Step 1 –Set Device to Provisioning Mode ..............................................10
Step 2 –Connect to Wi-Fi........................................................................11
Step 3 –Configure the Node ...................................................................13
Step 4 –Verify Profile..............................................................................15
Display Notifications....................................................................................16
LED Status ..................................................................................................18
Push-Button Functions................................................................................20
Wake Up:.................................................................................................20
Silence Speaker:......................................................................................21
Min/Max Reset:........................................................................................22
Turn Off Device:.......................................................................................24
Delete Wi-Fi SSID and Password:...........................................................25
Document Information.................................................................................27
 
 
 

OTA Series User Guide 2

OTA Series

The OTA series is the second generation of Wi-Fi Sensors from

SensoScientific. This series of nodes boasts over-the-air upgrade (OTA)

capabilities. This enable the devices to remotely upgrade firmware without

the need to be manually serviced. The devices offer a large, 2.7” e-ink

technology display which constantly shows the most current readings on the

node. Critical functions include 2.4GHz 802.11 b/g/n Wi-Fi compatibility with

an onboard visual and audible alarm in the event of data excursions. The

battery level is shown along with several feedback notifications on the upper

panel of the display. Additional alerts can be provided through a variety of

methods such as SMS, text message, voice call, pager, cell phone, fax, and

e-mail. All data is time-stamped and recorded –holding 4000 readings locally

and transmitting data perpetually to cloud.

Getting to Know Your Device

Figure 1 –OTA Node

LED

M8 Connector

Push-Buttons

Display

OTA Series User Guide 3

SensoScientific Cloud

The SensoScientific Cloud is the platform that all data is received and

recorded. The cloud can be accessed via any internet enabled device using

the following link:

Cloud.SensoScientific.com

Use the Login Information provided to you to login.

Figure 2 –Installation Slip

Figure 3 –Cloud Monitoring

OTA Series User Guide 4

Setting Up Your Device: App

The device set-up process takes only a few short minutes. For the device to

work properly, it must to set-up to a Wi-Fi Network. If you opted for

SensoScientific to pre-configure the device, please disregard this section.

The device can be configured using the SensoScientific app available on iOS

or Android devices. If you do not have a smartphone to use, go to the browser

method (See Page 10). The following are required to proceed:

1) OTA Wi-Fi Node(s)

2) 2.4GHz Wi-Fi Source

3) Internet accessible iOS or Android cell phone

Note: iOS 8 / Android 6.0 or newer is required.

Step 1 –Download App

Go to your phone’s app store. Search and download “SensoScientific”.

Figure 4 –Search App

OTA Series User Guide 5

Step 2 –Set Device to Provisioning Mode

The OTA device must be configured to the provisioning mode. This is done

by turning the device on (put the batteries in). The device screen will flash,

and the yellow LED will turn on solid. The device will attempt to connect to a

Wi-Fi source for 15 seconds. After this time, the device will alert that no

connection was established by alternating between the green and red LED

with an audible beep.

Figure 5 –Provisioning LED Flashing

Now, press the left and right buttons simultaneously on the device to enter

the provisioning mode.

Figure 6 –Provisioning Activation

OTA Series User Guide 6

Step 3 –Connect to Wi-Fi

On your cell phone, connect to the Wi-Fi network “mysimplelink-57D475”.

This will connect your phone to the OTA Node. See below for further

instructions on how to connect your phone to a Wi-Fi network using an iOS

or Android device:

Figure 7 –Connect Phone to OTA Sensor

OTA Series User Guide 7

iOS

1. From your Home screen, go to

Settings > Wi-Fi.

2. Turn on Wi-Fi.

Your device will automatically search for

available Wi-Fi networks

3. Tap the name of the Wi-Fi network that you

want to join - “mysimplelink-57D475”.

The digits after the hyphen will be the last 6

characters of the device’s MAC Address.

Android

1. Open the settings app.

You can find this in the apps drawer.

2. Tap the Wi-Fi symbol at the top left.

3. Tap the name of the Wi-Fi network that you

want to join - “mysimplelink-57D475”

The digits after the hyphen will be the last 6

characters of the device’s MAC Address.

4. Tap Connect to join the network.

Figure 8 –iPhone Set-Up

Figure 9 –Android Set-Up

OTA Series User Guide 8

Step 4 –Configure Wi-Fi

Now that you are connected to the OTA node from your cellular phone, go to

the SensoScientific app.

Figure 10 –SensoScientific App

From the app, go to the Wi-Fi Setup link at the bottom of the main screen.

Configure to the desired network from this platform.

Figure 11 –Wi-Fi Set-Up

Select the security that the network uses and input the appropriate

information for the OTA node to join the network.

OTA Series User Guide 9

Figure 12 –Enterprise Security

Note: The platform supports enterprise security

Once all the appropriate information has been added, select “Join” at the top

right of the screen to connect the device to the desired network. If any issues

are found while trying to connect or at any time throughout the set-up process,

contact technical support. 1-800-279-3101

Support extension - option 4 at the prompt

Plug the probe into the device and place the probe wherever you are

looking to monitor data. Go to cloud.sensoscientific.com to access your

data. Use the username and password provided to you via email or in the

Installation Slip within your shipment (See Figure 2)

Questo manuale è adatto per i seguenti modelli

Indice

Manuali Regolatori di temperatura popolari di altre marche

Swegon

Swegon LUNAd MB Manuale utente

Lucky Reptile

Lucky Reptile Thermo Control II Manuale utente

SENSORMETRIX

SENSORMETRIX Argon 100 Manuale utente

Fuji Electric

Fuji Electric PXE4 Manuale utente

Yuyao gongyi

Yuyao gongyi XMT-808 series Manuale utente

Selec

Selec TC544C Manuale utente

P.W. KEY

P.W. KEY rt-208gt Manuale utente

Future Design

Future Design FDC-9200 Manuale utente

BH Thermal

BH Thermal BriskONE Manuale utente

Omron

Omron E5EX-H Manuale utente

West Control Solutions

West Control Solutions KS 45 Guida rapida

MCS

MCS RITC-15B Manuale utente

SMC Networks

SMC Networks Thermo-con INR-244-639 Manuale utente

eltherm

eltherm Ex-TC It Series Manuale utente

Omron

Omron C200H-TV Series Manuale utente

industrie technik

industrie technik CA1 Manuale utente

KRAL

KRAL EET 32 Manuale utente

dixell

dixell XR420C Schema elettrico