Simply fill the clean appliance with COLD water to the desire cup level and place percolator pipe and
empty basket into position as for making coffee. Plug appliance in and switch to “ON” position until the
perking stops.
Unplug the appliance when less than 3 cups of water remain.
When appliance is used to heat water only. It must be thoroughly cleaned “WELL” after each use. In addition
to special weekly cleaning using vinegar to remove mineral deposits. If these deposits are not removed,
pitting of the metal can occur and result in damage to the appliance. See special cleaning instructions.
5. Cleaning after use.
a. Remove the filter basket and percolator pipe from the tank and empty the filter basket this is easier if the
coffee dregs have dried up slightly.
b. Rinse the filter basket, filter cover and percolator pipe under tap water.
c. Rinse the inside of tank until it is clean. The appliance is now ready to use again.
6. Special cleaning.
Improper cleaning of appliance, especially the heating unit “WELL” will affect
performance, resulting in weak, lukewarm coffee and may even cause appliance to
stop perking. To keep the appliance working properly regularly follow these instructions.
If appliance is used daily, a special cleaning every 2 week, or every week used for heating water is necessary
to thoroughly clean the heating unit “WELL”. If not kept clean, the appliance will not work properly. See
the other sheet of instructions of the special cleaning tool for coffee percolator.
7. Maintenance.
a. Clean the filter basket, filter cover and top cover with a non-abrasive detergent and then dry them off with a
soft dry cloth.
b. The inside of the tank and the percolator pipe are made of stainless steel and can be cleaned with a scouring
agent, possibly in combination with a scouring pad.
c. If the appliance is to function properly, the cavity in the middle of the base must be free of lime scale and
coffee deposits. Use a scale remover if necessary.
d. The inside of the glass gauge can be cleaned with the aid of the enclosed pipe cleaner. First unscrew the
gauge cap, then insert the pipe cleaner into the glass gauge from above. Brush may also be used to clean
percolator.
Do not dismantle the glass gauge in the process.
e. To clean faucet, unscrew handle. Move a brush up and down through faucet, then insert brush through
opening inside appliance to clean faucet connection.
Wash faucet handle in hot soapy water and rinse. Replace faucet.
Do not use baking Soda to clean appliance as it can discolor and pit the metal
8. The following people are not suggested to use this products:
children or any persons inexperienced with the
Appliance.
9. Thermal cut-out.
The appliance must be unplugged before it can reset. The appliance is fitted with a thermal cut-out. If this is
activated, the appliance will turn itself off, although the lamp in the switch will remain on. In order to make
the appliance operational again, the reset button on the bottom of the appliance must be pressed once the
appliance has COOLED DOWN. If the appliance still does not work, you should consult your dealer. This
safety device may have been switched off during transport. If so , follow the above instructions.
Model No. : CP06A
Voltage :
120V AC 60HZ
Watts : 1250W
Dimension: Dia 22.70cm X 44.50cm High
Weight : 3.5KG
Volume : 6Liters
Minimum quantity: 2.50Liters
Capacity per hour:10Liters approx.
Time required to make max. quantity: 27 minutes approx.
Model No. : CP10A
Voltage : 120V AC 60HZ
Watts
: 1250W
Dimension: Dia 26.00cm X 46.80cm High
