Sentiotec PRONET WEB SERVER Manuale utente
Version 01/15 Ident no. 50950129
INSTRUCTIONS FOR INSTALLATION AND USE
English
EN
PRONET WEB
SERVER
WORLD OF WELLNESS
Table of Contents
1. About these instructions 3
2. Important information for your safety 4
2.1. Intended use 4
2.2. Safety information 4
2.3. Legal information 5
3. Product description 6
3.1. Scope of delivery 6
3.2. Product functions 6
4. Connection diagram 7
5. Starting up for the rst time 9
5.1. Setting up a new local WLAN network 10
5.2. Integration into an existing local area network (LAN) 11
5.3. Setting up WEB access 12
6. Operation 13
6.1. Overview of the main menu 14
6.2. Operating example 15
6.3. Setting the preset time 16
6.4. System settings 17
7. Cleaning and maintenance 19
7.1. Cleaning 19
7.2. Maintenance 19
8. Troubleshooting 19
9. Disposal 20
10. Technical data 20
WORLD OF WELLNESS
EN
Instructions for installation and use p. 3/20
1. About these instructions
Read these instructions for installation and use carefully, and keep them within
reach of the pronet web server. This ensures you can refer to information about
safety and operation at any time.
Symbols used for warnings
These installation and operating instructions feature warning symbols next to
activities presenting a hazard to the user. Warning symbols must be observed
at all times. This prevents damage to property and injuries, which in the worst
case may be fatal.
The warning symbols contain keywords with the following meanings:
DANGER!
Serious or fatal injury will occur if this warning symbol is not observed.
WARNING!
Serious or fatal injury may occur if this warning symbol is not observed.
CAUTION!
Minor injuries may occur if this warning symbol is not observed.
ATTENTION!
This keyword is a warning that damage to property may occur.
Other symbols
This symbol indicates tips and useful information.
These installation and operating instructions can also be found in the
downloads section of our website: www.sentiotec.com/downloads.
WORLD OF WELLNESS
Instructions for installation and use p. 4/20
2. Important information for your safety
The pronet web server has been produced in accordance with the
recognised safety regulations. However, hazards may occur during
use. You should therefore adhere to the following safety information
and the specic warnings in the individual chapters.
2.1. Intended use
The pronet web server allows all the available sauna functions to
be operated using devices such as a PC, smartphone, tablet, etc.
This is done using either a local network (LAN, WLAN) or over the
Internet (web). Up to 2 sauna control units can be connected to the
web server.
The pronet web server may only be used for operating and regulat-
ing a sauna heater that passes the combustion test described in
paragraph 19.101 of EN 60335-2-53. Alternatively, a suitable safety
shut-off device can be installed in or above the heater.
Any use exceeding this scope is considered improper. Improper
use can result in damage to the product, severe injuries or death.
2.2. Safety information
●Installation and connection of the sauna control unit may only be
performed when the power supply is disconnected.
●Observe all regulations applicable at the installation location.
●For your own safety, consult your supplier in the event of prob-
lems that are not explained in sufcient detail in the installation
instructions.
WORLD OF WELLNESS
EN
Instructions for installation and use p. 5/20
●The device must not be used by children under 8 years old.
●The device may only be used by children over 8 years old, by
persons with limited psychological, sensory or mental capabili-
ties or by persons with lack of experience/knowledge under the
following conditions:
– When they are supervised.
– When they have been shown how to use the device safely
and are aware of the hazards that could occur.
●Children must not play with the device.
●Children under 14 years old may only clean the device if they
are supervised.
● For health reasons, do not use the sauna when under the infl u-
ence of alcohol, medication or drugs.
● Make sure that no fl ammable objects have been placed on the
sauna heater before the sauna control unit is switched on.
2.3. Legal information
●The company sentiotec GmbH reserves the right to charge fees
or to discontinue the service offered at any time without stating
reasons. sentiotec GmbH cannot guarantee that the service is
compatible with the user’s technical equipment.
WORLD OF WELLNESS
Instructions for installation and use p. 6/20
3. Product description
3.1. Scope of delivery
●pronet web server
●2 x network cable, 1 m
●1 x network cable, 3 m
●Power supply unit
●Instructions for installation and use
3.2. Product functions
The pronet web server allows all the available sauna functions to be operated
using devices such as a PC, smartphone, tablet, etc. This is done using either
a local network (LAN, WLAN) or over the Internet (web). Up to 2 sauna control
units can be connected to the web server.
Compatible sauna control units:
●Pro B2
●Pro B3
●Pro C2
●Pro C3
A web application that is accessed using the web browser on your device (e.g. PC,
smartphone, tablet, etc.) is used for operation. Depending on the sauna control
unit being used, the number of functions that can be operated using the web
app will vary.
WORLD OF WELLNESS
EN
Instructions for installation and use p. 7/20
4. Connection diagram
Observe the following points when connecting the power to the sauna control unit:
●Work on the sauna control unit may only be performed when the power has
been disconnected.
12
3
4
5
Fig. 1: Connections
6 7
1Sauna 1 connection
2Sauna 2 connection
3 5 V DC mains input
4Ethernet
5Mini USB
6Transmission control light
7Reception control light
WORLD OF WELLNESS
Instructions for installation and use p. 8/20
RJ45 socket
RS485 ETHERNET
WEB
Setting up a connection (Fig. 1: Connections on page 7)
●Connect your sauna control unit to the web server (connection 1or 2).
►Use the network cables included with the delivery for connection.
●Connect the web server to your LAN network/WLAN router (Ethernet 4).
►Use the network cable included with the delivery for connection.
●Connect the power supply unit included with the delivery to a voltage supply
(5 V DC mains input 3).
Checking the connection: (see Fig. 1: Connections on page 7)
After successfully connecting the web server and the sauna control unit,
the transmission control light 6and the reception control light 7start
to fl ash. This indicates the web server is sending and receiving data.
If this is not the case, check the following items:
– The sauna control unit is switched on.
– The web server has a voltage supply and is operating.
– The cable connection between the sauna control unit and the web
server is in order.
– The sauna control unit is operating with software version V1.03 or higher.
Fig. 2: Function
WORLD OF WELLNESS
EN
Instructions for installation and use p. 9/20
5. Starting up for the rst time
Once all cables have been connected, the web server can be started up.
2 options are available:
●Operation in a local network (WLAN/LAN)
– WLAN: See 5.1. Setting up a new local WLAN network on page 10
– LAN: See 5.2. Integration into an existing local area network (LAN)
on page 11
●Operation in a network with an Internet connection (WEB/WAN):
– See 5.3. Setting up WEB access on page 12
Fig. 3: Network diagram
WLAN
LAN
WAN
WEB
WORLD OF WELLNESS
Instructions for installation and use p. 10/20
5.1. Setting up a new local WLAN network
You can use any standard, commercially available WLAN router with an Ethernet
connection to set up a new local WLAN network. The pronet web server is con-
nected directly to the WLAN router, and is therefore registered in the network as
a separate device with a specic IP address.
As a default setting, the web server has been allocated the IP address:
192.168.0.110
which is used to access it.
●Enter the IP address in the address bar of your Internet browser.
►If the web server is accessible, a log-in window appears, in which you
enter your user name and password.
The following standard settings are used:
User: sauna
Password: sentiotec
►If you are unable to connect to the web server, proceed with the following
item Setting up a WLAN router. Observe the operating instructions for
your router when doing so.
Setting up a WLAN router
1. Use your PC, tablet, smartphone, etc. to connect to the router using WLAN.
►If you are unable to connect to it using WLAN, use a network cable to
connect the router to your PC and following the instructions provided
by the router manufacturer in order to access the device conguration.
2. Enter the IP address of your router in the address bar of your browser (see the
instructions for the router).
► The conguration page for your router opens.
3. Change the IP address of the router to 192.168.0.254 and, if necessary, the
subnet mask to 255.255.255.0.
►Save the settings and try to connect to the web server again.
Indice
Altri manuali Sentiotec Controllori
Sentiotec
Sentiotec Pro B2 Manuale utente
Sentiotec
Sentiotec K3-NEXT Manuale utente
Sentiotec
Sentiotec Pro C2 Manuale utente
Sentiotec
Sentiotec K2-NEXT Manuale utente
Sentiotec
Sentiotec MySentio WiFi Manuale utente
Sentiotec
Sentiotec home.com4 Manuale utente
Sentiotec
Sentiotec Wave.com4 infra Manuale utente
Sentiotec
Sentiotec CV F4 Manuale utente
