Sentryus GSM-DE2123 Manuale utente

www.sentryus.com

GSM Door /Gate Intercom Entry System

For 123 Units max.

GSM-DE2123

USER MANUAL

USA VERSION

IP67

Please read this user manual and the quick setup guide completely and keep it for your future reference.

MADE IN TAIWAN

Speaker

LCD Display

Microphone

Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate

collection systems).

This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to

the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help

prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling

of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product,

please contact your local city office, your household waste disposal service or the shop where you purchased the product.

CAUTION

When using this GSM Door / Gate Intercom Entry System, basic safety precautions should always be followed to reduce the risk of fire, electric

shock and personal injury. Please read the following before using your equipment.

1. Handle this product with care

Avoid any shock or bumping of the product. Improper handling could damage the product.

2. Cleaning

Unplug the product before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

3. Requires a proper operating environment

This product is designed for outdoor use. Do not use this product near water. Do not use this product near an area where there is a potential of

gas leaks or near any fumes that can be explosive. Do not place this equipment near or over a radiator or any other heat source. Avoid using the

equipment during an electrical storm. There is a remote risk of electrical shock from lighting.

4. Check the power source voltage

The power source voltage should be within the specified range (Product must meet the specifications). Do not overload the wall outlet or power

cord where the power adapter is installed. This can result in fire or electric shock.

5. Objects and liquid entry

Never push objects of any kind into this product as this may touch dangerous voltage points of short out parts that could result in a fire or

electric shock. Never spill any kind of liquid on the product.

INDEX

CAUTION .................................................................................................................................................................. 2

PACKAGE CONTENTS ................................................................................................................................................ 4

SYSTEM DIAGRAM .................................................................................................................................................... 4

WALL MOUNT BRACKET DIAGRAM .......................................................................................................................... 5

INSTALLATION........................................................................................................................................................... 5

WIRING DIAGRAM & WIRING INSTRUCTIONS .......................................................................................................... 6

OPERATION & SETTINGS ...................................................................................................................................... 6-13

POWERING ON/OFF ...............................................................................................................................................6

MANAGER MODE & FUNCTIONS.............................................................................................................................7

MANAGER SETTINGS ...........................................................................................................................................7-8

VOLUME SETTINGS .................................................................................................................................................9

DOOR SETTINGS ................................................................................................................................................9-10

CALLING SETTINGS ................................................................................................................................................11

SUBSCRIBER ID NUMBER SETTING .......................................................................................................................12

CONTACTING A SUBSCRIBER ...........................................................................................................................12-13

OPEN DOOR REMOTELY .......................................................................................................................................13

BACK TO STANDBY SCREEN AUTOMATICALLY ......................................................................................................13

SIM CARD ..............................................................................................................................................................13

CALL MANAGER ....................................................................................................................................................13

MASTER RESET ......................................................................................................................................................13

SPECIFICATIONS ..................................................................................................................................................... 14

TROUBLESHOOTING ............................................................................................................................................... 14

WARRANTY ............................................................................................................................................................ 14

OPTIONAL NAME DIRECTORIES .............................................................................................................................. 15

RELATED PRODUCTS ............................................................................................................................................... 15

PACKAGE CONTENTS

Door/Gate Intercom Unit

Stainless Steel Surface

Mount Panel Housing

Wall Mounting Bracket

Power Adapter

13.5V DC 1000mA

Wire for Power

GSM External Antenna

16.5ft / 5m lead length

Four (4) Screws for

Mounting Bracket

Two (2) Screws for Door Phone

User Manual

For any returns, please include all components listed above with original packaging in Resalable Condition. Absolutely No Returns will be accepted

if any component is missing / damaged.

SYSTEM DIAGRAM

1) 2) 3) 4) 5)

6) 7) 8) 9)

Speaker

LCD Display

Keypad

0~9 Number keys

F1 Menu/Exit key

F2 Delete key

F3 ABC/abc/123 Exchange button

* Volume & select up key

# Volume & select down key

Microphone

Bottom Cover

Opening for

connecting wall

mount bracket

Metal back cover

plate

Opening for

connecting wall-

mount latch

Wiring terminal

SIM Card slot

GSM antenna socket

USB port

GSM antenna

Bottom cover

WALL MOUNT BRACKET DIAGRAM

INSTALLATION

1) Take the wall-mount bracket from the package and screw it on proper place (as Step 1 & 2

shown in figure 1).

2) Open the bottom cover of door unit and pass the wires through the hole. Then, refer to the

“Wiring Diagram and Wiring Instruction” to connect wires and insert the SIM card to SIM

card slot (as Step 3 shown in figure 1).

3) Put the bottom cover back (as Step 4 shown in figure 1).

4) Place door unit on the fixed wall-mount bracket (as Step 6 & 7 shown in figure 1).

5) Put the acrylic cover on the door unit when door unit has been screwed (as Step 8 & 9

shown in figure 1).

6) Plug the AC adapter into the AC outlet, then the door unit will go into standby mode (as

shown in figure 2.

Wall mount bracket

Screw connection to

GSM door/gate unit

Latch to connect to back

of the metal cover

Figure 1

Figure 2

WARNING: Only use the original power adapter

supplied. Using any other adapter might damage the

door unit and cause a risk of electric shock.

WIRING DIAGRAM & WIRING INSTRUCTIONS

1) System Power Supply Wiring

The system power supply (adapter) AC 120V or 230V / DC 13V is provided along with the system (please note whether it can meet local

voltage specification). The negative wire is connected to Terminal Pin 1 and the positive wire is connected to Terminal Pin 2.

2) Install Door Lock with System Power Wiring

The door lock power may be supplied from the system by connecting the positive wire of the lock to Terminal Pin 4 and the negative wire

to Terminal Pin 5. The ACK wire, if your strike has one, is connected to Terminal Pin 6. (The system will supply 12 volts DC at 1000mA.)

3) Install Door Lock with its own Power Supply Wiring

If the door lock comes with its own power supply or requires more power than what this unit provides, then the power should be

connected as follows:

Remove the jumper wires joining Terminal Pin 2 and Terminal Pin 3. Remove the jumper wires joining Terminal Pin 1 and Terminal Pin 5

as well. The positive wire of the power supply is connected to Terminal Pin 3 and the negative wire to Terminal Pin 5. The door lock’s

positive wire is connected to Terminal Pin 4 and the negative wire is to Terminal Pin 5. The ACK wire, if your strike has one, is connected

to Terminal Pin 6.

OPERATION & SETTINGS

Before operation please make sure the GSM Door Phone is installed correctly. Please also study all button functions before use.

POWER ON/OFF

To turn on the power:

Insert the plug of the power adapter into the DC power jack of door unit and the other end into an AC power outlet. When the power is on, the

system will emit a “beep” sound, show “GSM Door Phone” and software version on screen, then show “Search Network” for a few seconds, and

then go to standby mode.

To turn off the power:

Turn off the door unit by unplugging the power adapter from the AC power outlet.

MANAGER MODE & FUNCTIONS

Note: The unit will be time out after 5 seconds if no button is pressed.

Press F1 (MENU) button, and the system will show "Hello! Manager!

"Password: ______".

After entering default password "123456", press CALL button to show the button functions as listed below:

Press any button or wait for 6 seconds, it will show:

MANAGER SETTINGS

Under the Manager section, there are 4 main options: “System Setting”, “Volume Setting”, “Door Setting” and “Calling Setting”.

Press CALL button to enter System Setting.

CHANGE MANAGER PASSWORD:

Manager Setting System Setting Change Password

Note: The Manager Password is the key to enter Programming Mode. Please make sure to keep the Manager Password in a safe place. If you forget

the Manager Password, you’ll have to do a Master Reset which will delete your stored phone numbers and settings.

Under the Manager Menu option, press CALL button.

Select System Setting and press CALL button.

Select Change Password and press CALL button.

Enter new password by Number button (must be 6 digits).

Enter password again to confirm and press CALL button.

STORE MANAGER PHONE NUMBER:

Manager Setting System Setting Manager Phone#

Note: This will be the number that is called when the CALL button is pressed in standby mode.

Under the Manager Menu option, press CALL button.

Select System Setting and press CALL button.

Select Manager Phone # by /key and press CALL button.

With cursor on the 1, press CALL button to enter phone number.

Enter phone number with prefix and area code, then press CALL button to save. (If you enter a number incorrectly, use the /button to

move forwards or backwards. The F2 (Delete) button will clear a digit you do not want.)

Press F1 (EXIT) button to return to previous option screen.

SET MINUTES FOR TALKING TIME:

Manager Setting System Setting -Talking Time

Under the Manager Menu option, press CALL button.

Select System Setting and press CALL button.

Select Talking Time and press CALL button.

Input the number for minutes you will need for the intercom to be made without re-dial, then press CALL button to save.

Press F1 (EXIT) button to return to previous option screen.

SET GREETINGS:

Manager Setting System Setting Greetings

Under the Manager Menu option, press CALL button.

Select System Setting and press CALL button.

Select Greetings and press CALL button.

Select the default 1, 2 or User setting.

Enter the Greetings: 1 or 2 screen, then select default 1 or 2, press F1 (EXIT) to confirm and exit.

To set the “Greetings”by user, press ＊or # key to start the setting.

Press F3 to select ABC, abc or 123. 0 key for space.

After “Greetings” is set, press CALL button to save, press F1 (EXIT) to exit and return to previous option screen.

VOLUME SETTINGS

Change Microphone Volume:

Manager Setting Volume Setting Mic. Volume

Note: There are 9 levels of sensitivity for the microphone volume going from left (least sensitive) to right (most sensitive). If the GSM Door Phone is

installed outdoors, please set the microphone level to 3 or 4. This may help to reduce picking up too much background noise and/or feedback from

the speaker.

Under the Manager Menu option, press CALL button.

Select GSM Setting and press CALL button.

Select Mic. Volume and press CALL button.

Press ＊/＃(UP/DOWN) buttons to adjust volume.

Press F1 (EXIT) button to return to the previous option screen and the last setting will be saved automatically.

Change Speaker Volume:

Manager Setting GSM Setting Speaker Volume

Note: There are 9 levels of speaker volume from left (lowest) to right (loudest). If the GSM Door Phone is installed outdoors, please set the speaker

level to 4 or 5. Try not to set the speaker volume to the maximum level because it may cause feedback.

Under the Manager Menu option, press CALL button.

Select GSM Setting and press CALL button.

Select Speaker Volume and press CALL button.

Press ＊/＃(UP/DOWN) buttons to adjust volume.

Press F1 (EXIT) button to return to the previous option screen and the last setting will be saved automatically.

Change Speaker Volume During Conversation:

At any time during the conversation, if the caller needs to increase speaker volume, he can press ＊/＃(UP/DOWN) buttons to make adjustment.

The screen will show the current speaker volume and the microphone will be mute for 1.5 seconds, then the conversation will be continued.

DOOR SETTING

Enable/Disable Door Lock Open by Password:

Manager Setting Door Setting Open by Password

Note: If your GSM Door Phone is connected with an electric door strike, you can activate the password feature to open the door lock with a

password. The default password is “123456”.

Under the Manager Menu option, press CALL button.

Select Door Setting and press CALL button.

Select Open by Password and press CALL button.

Press CALL button to toggle between “Enabled” and “Disabled”.

Press F1 (EXIT) button to return to the previous option screen and the last setting will be saved.

Under standby mode, press the password and then press “F1” to open the door.

Change Door Opening Password:

Manager Setting Door Setting Opening Password

Note: This GSM Door Phone system will allow the user to open door by pressing 6-digit password. This feature is designed for easy access control.

We suggest to change the Door Opening Password every month or every two weeks for security concern.

Under the Manager Menu option, press CALL button.

Select Door Setting and press CALL button.

Select Opening Password and press CALL button.

Enter password (must be 6 digits).

Press CALL button to save the new password.

Press F1 (EXIT) button to return to previous option screen.

Door Opening Time:

Manager Setting Door Setting Door Open Time

Note: This GSM Door Phone system will allow the user to set how long the door lock will be opened. Sometimes, the user might need more time to

reach from the door phone unit to the locked main gate. We suggest to set enough time to allow him/her walk in no hurry.

Under the Manager Menu option, press CALL button.

Select Door Setting and press CALL button.

Select Door Open Time and press CALL button.

Enter the number of seconds (from 00 to 99).

Press CALL button to save.

Press F1 (EXIT) button to return to previous options screen.

Door Relay Type:

Manager Setting Door Setting Door Relay Type

Under the Manager Menu option, press CALL button.

Select Door Setting and press CALL button.

Select Door Open Time and press CALL button.

Press ＊/＃(UP/DOWN) buttons to select “Normal Open”or “Normal Close”.

Press CALL button to save the setting.

Press F1 (EXIT) button for back to previous option screen.

Indice

Altri manuali Sentryus Sistema di interfono

Sentryus

Sentryus NC-DS2 Scheda tecnica

Manuali Sistema di interfono popolari di altre marche

Bticino

Bticino LINEA 3000 Manuale utente

MSI

MSI MSI-140 Manuale utente

golmar

golmar Stadio Plus Manuale utente

CyberData

CyberData 011211 series Manuale

Vidos

Vidos duo M1021 Manuale utente

Vimar

Vimar ELVOX 7539/E Manuale utente

SSS Siedle

SSS Siedle BTSV 850-03 Manuale utente

Dahua

Dahua VTO Series Manuale utente

Elvox

Elvox 5651 Manuale utente

Videx

Videx VIDEOKIT Series Manuale utente

Rocom

Rocom Doortello Business FW T2.05W2.04 Manuale utente

Viking

Viking E-35-EWP Manuale utente

Safeguard Supply

Safeguard Supply LRA-EX1000 Manuale utente

SSS Siedle

SSS Siedle BFCV 850 Series Manuale utente

GRD

GRD MAX V2 Manuale utente

Alecto

Alecto ADI-250 Manuale utente

Aiphone

Aiphone IE-8MD Manuale utente

Perel

Perel EDB4 Manuale utente