SEPTENTRIO Altus NR2 Manuale utente

Altus NR2 with Carlson SurvCE

Application Note

LIST OF CONTENTS

List of Contents

1Introduction 3

1.1 FOREWORD .................................................................................. 3

1.2 SUPPORT ..................................................................................... 3

2Install SurvCE/SurvPC 4

2.1 BEFORE INSTALLATION ..................................................................... 4

2.2 SURVCE INSTALLATION: WINDOWS MOBILE ............................................. 4

2.3 SURVPC INSTALLATION: WINDOWS PC ................................................... 5

3 Conﬁgure SurvCE 6

3.1 STARTING A NEW PROJECT ................................................................. 6

3.2 BLUETOOTH CONNECTION TO THE ALTUS NR2 .......................................... 7

3.3 CONFIGURE THE ALTUS NR2 FOR RTK .................................................... 8

3.4 VERIFYING THE CONFIGURATION .......................................................... 9

1Introduction

1.1 Foreword

The Altus NR2 can be used with SurvCE. The Altus NR2 driver is included in SurvCE

versions from 4.02 onwards however, Septentrio recommends to use version 5.02

or above. Using any Windows Mobile data collector, download the executable ﬁle

(SurvCE_WindowsMobile.exe) for installation. SurvPC may also be used on a Windows PC.

The SurvCE conﬁguration example in the following sections will detail how to:

•Install SurvCE/SurvPC

•Conﬁgure SurvCE

◦Conﬁgure the Altus NR2 for RTK

◦Check the set up

1.2 Support

For ﬁrst-line support, please contact your Septentrio dealer. Further information can be

found on the Septentrio support website for documentation and ﬁrmware upgrades or by

contacting Septentrio Technical Support group:

http://www.septentrio.com

support septentrio.com

septentrio_support

Europe

Septentrio NV Phone: +32 16 300 800

Greenhill Campus Fax: +32 16 221 640

Interleuvenlaan 15G, sales septentrio.com

3001 Leuven,

Belgium

North and South America

Septentrio Inc. Phone: +1 310 541 8139

23848 Hawthorne Blvd. sales septentrio.com

Suite 200,

Torrance, CA 90505

USA

Asia-Paciﬁc

Septentrio Phone: +852 3959 8680

Level 901, The Lee Gardens sales septentrio.com

33 Hysan Avenue,

Causeway Bay

Hong Kong

2Install SurvCE/SurvPC

2.1 Before installation

Make sure the PIN code on the micro SIM card to be used in the Altus NR2 has been

deactivated.

The easiest way to do this is by inserting the SIM card into a phone then deactivating

it. n most phones, this functionality can be found in a security settings or SIM card menu.

2.2 SurvCE installation: Windows Mobile

1. Power on the Windows Mobile device and connect it to the PC. Wait for Windows Mobile

Device Center to connect.

2. Once the PC connection to the Windows Mobile device has been established, double

click on the ‘SurvCE_WindowsMobile.exe’ ﬁle to begin the installation.

Figure 2-1: SurvCE executable ﬁle

3. The installation will begin by transferring the ﬁles to the data collector. Agree to

the license and click next. When the transfer is complete, the data collector may be

disconnected from the PC.

Figure 2-2: SurvCE installation

2.3. SURVPC INSTALLATION: WINDOWS PC

4. On the Windows Mobile device, select to install SurvCE on ‘device’and hit continue.

After installation, click on the Windows start button and locate SurvCE. Double-click

the SurvCE icon to open the program.

Figure 2-3: SurvCE installation on a Windows Mobile device

5. SurvCE (Windows Mobile) should have installed correctly.

2.3 SurvPC Installation: Windows PC

Installation of SurvPC is straightforward. Download the ‘SurvPC_EngOnly_Setup.exe’ ﬁle.

Double-click to begin the installation and follow the on-screen prompts.

Figure 2-4: SurvPC executable ﬁle

3 Conﬁgure SurvCE

3.1 Starting a new project

Open SurvCE, select a new job and name it. Select the appropriate job settings and continue

without connecting to the device.

Note that the unit may appear as APS-NR2 when using older versions of the Altus NR2

ﬁrmware

Figure 3-1: Job setup SurvCE

3.2. BLUETOOTH CONNECTION TO THE ALTUS NR2

3.2 Bluetooth connection to the Altus NR2

In the ‘Equip’tab, select ‘GPS Rover’to open the Rover setup menu. In the ‘Current’tab, select

‘Septentrio’then ‘Altus NR2’. Click on the ‘Comms’tab and select ‘Bluetooth’and ‘Find Devices’

to search for available Bluetooth devices.

Figure 3-2: Altus NR2 Bluetooth setup SurvCE

Select the appropriate Bluetooth device, click on ‘Set Device PIN’, and set the PIN to ‘1234’.

Figure 3-3: Bluetooth pairing

Select the ‘Current’tab and click on the icon to show the Altus NR2 information. It will also

will conﬁrm that the Altus NR2 is connected and properly communicating via Bluetooth.

3.3. CONFIGURE THE ALTUS NR2 FOR RTK

Figure 3-4: Altus NR2 status SurvCE

3.3 Conﬁgure the Altus NR2 for RTK

Select the Receiver tab and enter the Antenna Height. In the RTK Tab, select Internal GSM

then click on the conﬁgure icon to the right of it. Click on the green arrow check button when

complete.

Figure 3-5: APN Settings SurvCE

In the RTK tab, select NTRIP and click on the conﬁguration icon to the right of it. Enter the

NTRIP settings, hit the green check and select the appropriate Mountpoint from the source-

table. Click on the green arrow check button when complete.

Figure 3-6: NTRIP Settings SurvCE

3.4. VERIFYING THE CONFIGURATION

3.4 Verifying the Conﬁguration

Click on the green arrow check button to complete the RTK setup. To check the conﬁguration,

click on ‘Monitor SkyPlot’in the Equip menu. This will show the Altus NR2 in RTK mode if the

setup was performed properly.

Figure 3-7: NTRIPInitialization SurvCE

Altri manuali per Altus NR2

Indice

Altri manuali SEPTENTRIO Hardware di rete

SEPTENTRIO

SEPTENTRIO PolaRx5TR Manuale utente

Manuali Hardware di rete popolari di altre marche

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuale utente

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuale utente

Yudor

Yudor YDS-16 Manuale utente

D-Link

D-Link ShareCenter DNS-320L Manuale utente

Samsung

Samsung ES1642dc Istruzioni per l’uso

Honeywell Home

Honeywell Home LTEM-PV Istruzioni per il montaggio

evertz

evertz 7700 Series Manuale utente

D-Link

D-Link ShareCenter DNS-343 Manuale utente

Asante

Asante AsanteBridge 1012 Manuale utente

FireBrick

FireBrick FB2700 Manuale utente

Audiovox Electronics

Audiovox Electronics ARWH2T Manuale utente

ADC

ADC DSX-1 Manuale

NetComm

NetComm NF2 Manuale utente

Alcatel-Lucent

Alcatel-Lucent 5620 Manuale utente

Dell EMC

Dell EMC XC6420 Series Manuale utente

Lanner

Lanner NCA-1020A Manuale utente

Allied Telesis

Allied Telesis AT-TN121-A Manuale utente

Arista

Arista CCA-ETM-Q12 Manuale utente