Sercomm SOHO MagicBox Manuale utente
SOHO MagicBox
Small Cell
Model: SRE4105T
Quick Installation Guide
Manufacture By:
Sercomm Corporation
8F, No. 3-1, YuanQu Street, Nankang,
Taipei 115, Taiwan, R.O.C.
i
Table of Contents
CHAPTER 1 INTRODUCTION.............................................................................................. 1
Package Contents .............................................................................................................. 1
Key Feature........................................................................................................................ 1
LEDs ................................................................................................................................... 2
Front & Rear Panel........................................................................................................... 3
CHAPTER 2 INITIAL INSTALLATION............................................................................... 4
Device Start up Procedure................................................................................................ 4
CHAPTER 3 SPECIFICATIONS............................................................................................ 5
General Specification ........................................................................................................ 5
RF Characteristics............................................................................................................. 5
Regulatory Requirements ................................................................................................. 6
Safety Information............................................................................................................. 7
Device Surface Cleaning ................................................................................................... 9
Accessories ....................................................................................................................... 10
1
Chapter 1
Introduction
SOHO MagicBox is an indoor, self-configuring small cell device that will be used to ensure
Increased LTE Data Speeds using Sprint network and Increased LTE coverage at the customer
premises.
Package Contents
Package will include following items:
1 x SOHO MagicBox SRE4105T Device
1 x AD/DC Power Supply Adapter
If any of the above items are damaged or missing, please contact your dealer immediately.
Key Feature
•Designed for indoor/residential/Small Office Retention
•LTE Femto Cell Access up to 16 LTE active users
•4T8R LTE UE-Relay with omni antenna for easy installation
•Support 4G TD-LTE Band 41 for Femto Cell access
•Support 4G TD-LTE Band 41 & Band 25 for LTE Backhaul
•5 x LEDs status display and Info Button
•Support 3
rd
party APP via Bluetooth Low Energy (BLE) 4.2
•Internal LTE and GPS antennas
1
2
LEDs
SOHO MagicBox has 5 LED indicators: Power, GPS, Service(Relay), LTE(Femto), and Info.
Table below describes the definition of each of SOHO MagicBox LED:
LED Description Steady ON Blinking OFF
Power(Green) Device is Power On N/A Device is Off or No
power
GPS(Green) GPS Locked Trying to connect
and lock GPS
satellite
GPS cannot lock
Service(Green)
connected to donor
Successfully
Trying to connect
to donor
No Donor Signal
LTE(Green) LTE s all cell ready
to provide service
PnP process on
going
No LTE service to
user
nfo (bi-color:
Red /Green)
Reserved(TBD) Blinking Red,
indicating device
encounter error or
issues; user will
push info button to
check Info status
No infor ation for
user
3
Front & Rear Panel
Front Panel
Info Button Info Button for LED Status & Device Reset
Back Panel
Power Input: 12 Vdc, 2.5A, Power Jack to Power Adaptor
4
Chapter 2
Initial Installation
SRE4105T is designed for Plug-n-Play(PnP) and self-configure which not require any software
installation to use. When device power on the device, it will start scanning and search for valid
LTE backhaul donor eNB and begin the device Plug PnP and provision processes. The PnP
and provision process will take approximate 6~7 min. to bring up and activate the device
service.
Device Start up Procedure
2
5
Chapter 3
Specifications
General Specification
Connectivity -12x Internal Antennas
-No wired connection
Power Supply External Power Adapter:
Input: AC100～240V~1.6A, 50Hz/60Hz, 0.9A Max.
Output: 12 Vdc, 2.5A
Operating Requirement Operating Temp. -5ºC to 40ºC
Storage Temp. -5ºC to 45ºC
Operating Humidity 5% to 90% Non-Condensing
Storage Humidity 5% to 95% Non-Condensing
Reset button Reset & Info Button
LED 5 LED for Status.
Housing 308mm(W)x192mm(H)x110mm(D)
RF Characteristics
LTE Access RF
Transceiver
Band
Technology
Tx Power(B41)
QCA FTR8930
Band 41
2T2R MIMO
24dB Max per chain (Conduced)
LTE Backhaul RF
Transceiver
Band
Technology
TX Power(B41)
TX Power(B25)
GCT GDM7243A+GRF7243A
Band 41,Band 25
4T8R(B41) 2T8R(B25)
23 dB (B41) Max per chain (Conducted)
20 dB (B25) Max per chain (Conducted)
Bluetooth RF
MCU
Technology
TX Power
TI CC2640
Bluetooth Low Energy 4.2 SPP
4 dB Max (Conducted)
3
6
Regulatory Requirements
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protec-
tion against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
Operations in the 5.15-5.25GHz band are restricted to indoor usage only.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 25cm
between the radiator & your body.
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Sercomm Hardware di rete
Manuali Hardware di rete popolari di altre marche
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manuale utente
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manuale utente
Yudor
Yudor YDS-16 Manuale utente
D-Link
D-Link ShareCenter DNS-320L Manuale utente
Samsung
Samsung ES1642dc Istruzioni per l’uso
Honeywell Home
Honeywell Home LTEM-PV Istruzioni per il montaggio
