SeriPrint SP25 VDE Manuale utente
SP25 VDE
OperatorsManual
Revision 2.0-1 USAUSA
USAUSA
USA
Contents
Specifications ................................................................5
SAFETYINFORMATION...........................................6
INTRODUCTION .........................................................8
MACHINE(Finalpaperdeliveryview).......................9
MACHINE(Duplicatordeliveryview) ......................10
OPERATIONPANEL ................................................ 11
WHERETOPUTTHESERIPRINTER...................12
POWER ONAND OFF .............................................13
BASICOPERATION .................................................14
INK..............................................................................17
WHATTODOIFSOMETHINGGOESWRONG...18
PRINTINGTIPS.........................................................19
SP25 VDE OM 2.0-1 (2006) 3
Thisdocumentationoranypartofitmaynotbereproduced,storedortransmitted
inanyform,including,butnotlimitedtoelectronic,photocopying,mechanicalcopy-
ing,electrostaticcopying,recordingorother meanswithoutexpress writtenper-
missionofSeriPrintSA(Pty.) Ltd.
SeriPrint, SeriPrinter, SP100II, SP25, SeriInk, SeriLink and all other related
brand names are registered trademarks of SeriPrint South Africa (Pty) Ltd.
ZipRip, is a trademark of SMA (Australia) Ltd.
PostScript is a trademark ofAdobe Systems Inc. Windows is a registered
trademark of Microsoft Inc. Other brand or product names, throughout
this document, are trademarks or registered trademarks of their respective
holders.
4SP25VDE OM 2.0-1(2006)
SP25 VDE OM 2.0-1 (2006) 5
Specifications
Machinessupported .............. Digital Duplicator ModelsC229,C233,C232,
C239, C235, C244 and C262
Ricoh,Gestetner,Nashuatec,Rex Rotary,
Standard,SavinandLanier.
PrintSpeed ........................... 60 to 120 Sheets per Minute. (Max 11x17,A3)
Timers ................................... Copies, LampHours
PaperHandling ...................... Automaticspeedadjustingvacuumbelts
PaperCollection .................... Asperdigitalduplicatorspecification
PaperSize ............................. Maximumsize-Asperdigitalduplciator
Minimumsize-Width78mmLength148mm
PaperWeight......................... Asperdigitalduplicatorspecification
DryingMechanism ................. InkPolymerization
Drying ................................... 3 x 400 Watt
Power ................................... 110v
PowerSave........................... AutomaticInactivityShutdown.
Ink ........................................ 13 Base Colors plus 10 Standard Colors.
DimensionsBoxed ................. 800mm H, 900mmL,700mm W
DimensionsStored................. 658mmH,874mmL, 600mm W
DimensionsSetup ................. 658mm H,1234mmL,600mm W
Weight................................... 80 kg.
Certification ........................... CE, FCC ClassA.
This devise complies with Part 15 of the FCC Rules.
Federal Communications Commission (FCC) Statement.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a commercial installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. Operation of this equipment in a residnetial area is likely to cause harmful interference
in which case the user will be required to correct the interference at his own risk.
Scientific Management Associates UK Ltd is not responsible for any radio or television interference caused
by using other than recommended cables and connectors or by unauthorised changes or modifications to this
equipment. Unauthorised changes or modifications could void the user’s authority to operate the equipment.
This devise complies with part 15 of the FCC Rules. Operation is subject to the following two conditions
(1) this device may not cause harmful interference, and (2) this devise must accept any interference
received, including interference that may cause undesired operation.
6SP25VDE OM 2.0-1(2006)
SAFETYINFORMATION
Whenusingyour equipment, thefollowingsafetyprecautions shouldalwaysbe
followed.
Safety During Operation
WARNING: Indicatesapotentiallyhazardoussituationwhich,ifinstructions
arenot followed,couldresultindeathorserious injury.
CAUTION: Indicates a potentially hazardous situation which, if in-
structions are not followed, may result in minor or mod-
erate injury or damage to property.
WARNING:
• Connect the power cord directly into a wall outlet and never use an extension cord.
• Disconnect the power plug by pulling the plug, not the cable.
• Only connect the machine to the power source described in the Specifications on
page 5 of this manual. Connect the power cord directly into a wall outlet and do not
use an extension cord.
• Do not damage, break or make any modifications to the power cord. Do not place
heavy objects on it. Do not pull it hard nor bend it. These actions could cause an
electric shock or fire.
• Do not modify or replace any parts other than the ones specified in this manual
• Since some parts of the machine are supplied with high voltage, touch only the parts
specified in this manual.
• To avoid hazardous electric shock, do not remove any covers or screws other than
those specified in this manual.
• Do not operate the machine without covers.
• Turn off the power and disconnect the power plug (by pulling the plug, not the
cable) if any of the following conditions exists:
• Something is spilled into or on the equipment
• You suspect your equipment needs service or repair.
• Your equipment’s cover has been damaged.
• Do not leave machine unattended while printing is in progress.
• Do not operate the machine when it is not connected to a Digital Duplicator.
• Only attach to the specified Digital Duplicators listed on page 5.
• UV light is hazardous. Use equipment in accordance with the operation manual.
• Do not remove any covers. No USER servicable parts inside.
SP25 VDE OM 2.0-1 (2006) 7
• Adequate ventilation must be provided as specified in the section of this manual
entitled “Where to put the SeriPrinter”.
CAUTION
• Protect the equipment from direct sunlight, dampness or wet weather, such as rain,
snow, and so on.
• While printing, do not turn off any portion of the system. To do so will cause
damage to integral components and damage the belts.
• While printing, do not open the cover.
• While printing, do not unplug the power cord.
• While printing, do not move the machine.
• Keep all liquids off the machine.
• Do not allow paper clips, staples, or other small objects to fall inside the machine
• Be careful not to cut yourself on any sharp edges when you reach inside the machine
to remove miss fed sheets of paper.
• Do not spill liquid on the machine.
• Do not sit on the machine.
• Do not place the machine up against a wall. Ensure that there is no less than 50cm
between the machine and the wall.
• Unplug the power cord from the wall outlet before you move the equipment. While
moving the equipment, you should take care that the power cord will not be damaged
under the equipment.
• If you clean rubber parts with benzine, or other volatile solvent, wipe them with a
dry cloth afterwards.
• Always print with UV filter cover in place.
• Do not open any panels marked - HIGH VOLTAGE
• Always turn the power to the machine off when you have finished printing for the
day.
• When the machine will not be used for long periods, disconnect the power plug
from the wall outlet, always pull the plug (not the cable).
• If the machine must be transported by vehicle, please contact your service
representative.
• For environmental reasons, do not dispose of the equipment or expended supply
waste at household waste collection points. Disposal can take place at an authorized
dealer or at appropriate collection sites.
8SP25VDE OM 2.0-1(2006)
INTRODUCTION
TheSeriPrinterSystemproducesdryprintedoutput,similartoacopier. Thisisas
aresultofit’suniqueandpatentedfixingsystem. Thisenables theusertoprinton
awidevarietyofpaper,cardandcertain coatedstockincludingvinyl.
TheSeriPrinterisafreestandingunitwhich,operatesinconjunctionwiththeRicoh
family of duplicators. No electrical connections to theduplicator are required.
TheModel25ispositionedatthepaperexitsideoftheduplicator, afterremoving
thepaperdeliverytrayand repositioningiton thedeliveryside oftheModel25.
OncetheSeriprinterisset up an extended range ofpaperandcardstockscan be
printedon. Thisincludesvinylandcertaincoatedstockwhichtraditionalduplica-
torinkcannotdryon.
In addition a wide range of ink colors are available with the Model 25. This
includeswhite,varnish,andacomprehensiverangeofmixedcolors.
Duplicator Paper Delivery
ä
ä
ä
ä
SeriPrinter
Receives Paper
HeightAdjusters
SP25 VDE OM 2.0-1 (2006) 9
MACHINE (Final paper delivery view)
ä
ä
ä
ä
ä
Digital Duplicator
paper tray
Paper exit
Fixingarea
UV Protective cover Controlpanel
10 SP25VDE OM 2.0-1(2006)
MACHINE (Duplicator delivery view)
Paper collection from
duplicator
ä
ä
ä
ä
Paper transport vacuum belts
Paper jam pin
Safety switch
ä
Docking holes
and slot
Indice
Manuali Duplicatore di dischi popolari di altre marche
Kanguru
Kanguru U2-DVDDUPE-S Manuale utente
StarTech.com
StarTech.com 8STSATDUP11 Manuale utente
DUPLO SEIKO CORPORATION
DUPLO SEIKO CORPORATION Duprinter DP-460 Manuale utente
Addonics Technologies
Addonics Technologies UDFH7 Manuale utente
Vinpower Digital
Vinpower Digital MiniLoader VDX-1 Manuale utente
Addonics Technologies
Addonics Technologies CFASTD5 Manuale utente