SETHCO pumps are warranted by the Company, insofar as the same are of its own manufacture, against
defects in materials and workmanship under proper and normal use and service, for a period of one year
from the date of original shipment from the factory. SETHCO's obligation is limited, however, to furnishing
without charge, F.O.B. its factory, new parts to replace any similar parts of its own manufacture so proving
defective within said period, provided the Buyer has given SETHCO immediate written notice upon
discovery of such defect. No allowance will be made for labor charges. SETHCO shall have the option of
requiring the return of the defective material, transportation prepaid, to establish the claim.
SETHCO makes no warranty or guarantee whatsoever, either express or implied, of prime mover, starting
equipment, electrical apparatus, parts or material not manufactured by SETHCO, except to the extent that
warranty is made by the manufacturer of such equipment and material.
SETHCO assumes no liability for damages or delays caused by defective material, and no allowance will
be made for local repair bills or expenses without the prior written approval or authority of SETHCO.
Under no circumstances will SETHCO be liable for indirect, special or consequential loss or damage of
any kind and the Buyer assumes all liability for the consequences of its use or misuse by the Buyer, his
employees, or others.
Is at the specified point of rating only and will not cover performance under conditions varying therefrom,
nor for sustained performance over any period of time.
If required, shall be conducted in accordance with the practices as set forth in the Hydraulic Institute
Standards. The expense of any such tests shall be borne by the Buyer.
Are based on shop laboratory tests with cold water as outlined in the Hydraulic Institute Standards.
Due to the inaccuracies of field testing, the results of any such tests conducted by or for the Buyer shall
be interpreted as being only indicative of the actual field performance of the pump. No equipment will be
furnished on the basis of acceptance by results of field tests. If the Buyer, after such a test, questions the
performance of the pump, he may at his option request a test to establish the performance. Such tests
will be conducted in accordance with the above paragraph entitled “Acceptance Tests.”
Are void if -
a. Pipe strains are the cause of damage.
b. Pump handles liquids other than those specified in detail.
c. NPSH lower than required by pump impeller.
d. Operating speed is higher than specified.
e. Improper field installation.
To combat corrosion, abrasion, erosion, or pumping solids, foreign objects, or pumping liquids at elevated
temperature, any such recommendations will be based on the best available experience of SETHCO and
the supplier of the material and industry, BUT WILL NOT CONSTITUTE A GUARANTEE AGAINST
THESE EFFECTS.
The foregoing warranty is made in lieu of all other warranties guarantees, obligations or liabilities,
expressed or implied, by SETHCO or its representatives. All statutory or implied warranties, other than of
title, are hereby expressly negated and excluded.
All illustrations and provisions in specifications are descriptive and are not intended as warranties.
Penalty of any kind are not acceptable unless approved in writing by an officer of Met-Pro Corporation.
WARRA TY
PERFORMA CE
GUARA TEE
ACCEPTA CE
TESTS
PERFORMA CE
PRESE TATIO S
FIELD TESTI G
ALL WARRA TIES
RECOMME DATIO S
FOR SPECIAL
MATERIALS
2
Sethco
800 Emlen Way, Telford, PA 18969
Tel: 215-799-2577 • Fax: 215-799-0920
wwwwww..sseetthhccoo..ccoomm••iinnffoo@@sseetthhccoo..ccoomm
SETHCO WARRA TY
SETHCO
A Met-Pro Fluid Handling Technologies Company
Thermoplastic Pumps
