SG Wireless SGW6008 Manuale utente

SG Wireless™ Confidential

SGW6008 BLE-WiFi Gateway

User Manual

September 2020 V1.2

USGC1.01-V1.2 SGW6008 BLE-WiFi Gateway User Manual

SG Wireless™ Confidential

Contents

1. Introduction

2. SGW6008 BLE-WiFi Gateway

a. Exterior

b. Specifications

3. Provisioning Procedures

a. AP Mode Configuration

b. WiFi Network Configuration for SGW IoT Platform

c. Gateway Provisioning

4. Edge Device Provisioning

5. Certification

6. Revision History

USGC1.01-V1.2 SGW6008 BLE-WiFi Gateway User Manual

SG Wireless™ Confidential 1

1. Introduction

The robust SGW6008 BLE-WiFi Gateway enables Bluetooth Low Energy (BLE) to WiFi connectivity without

using an external smartphone or app. It collects data from BLE edge devices and sends the data over WiFi to

the local server or remote cloud server using HTTPS and MQTTS protocols with TLS1.2 standard (Figure 1,

with the edge device depicted by the SGW8130 BLE Sensor Tags).

As the connected solution for the SGW111X BLE Module and SGW8130 BLE Sensor Tag, the SGW6008

Gateway enables real-time remote monitoring or asset tracking for IoT applications, hassle-free.

IoT applications include but are not limited to:

•Industrial Smart lighting

•Smart logistics and transportation

•Smart devices for connected homes

•Smart city infrastructure

This user manual details the SGW6008 Gateway’s provisioning process for access to the SGW IoT Platform

(server), involving three procedures:

a. AP Mode configuration

b. WiFi network configuration for SGW IoT Platform

c. Gateway provisioning

This manual also describes the provisioning process of connecting the SGW6008 Gateway to an edge device.

Figure 1:

Data Collection and Transmission through SGW6008 Gateway

USGC1.01-V1.2 SGW6008 BLE-WiFi Gateway User Manual

SG Wireless™ Confidential 2

2. SGW6008 BLE-WiFi Gateway

a. Exterior (Figure 2)

1. Micro-USB power input (5.0V DC, 1A)

2. AP mode button for network configuration with WiFi and

Gateway provisioning

3. 3 LED status indicators (Table 1)

b. Specifications

Absolute Maximum Rating

Power Supply

5.5V DC

Storage Temperature

-20°C to 80°C

Recommended Operating Conditions

Power Supply

5.0V DC

Operating Temperature

-10°C to 60°C

General

Module

SGW BLE Module

Operating System

Amazon FreeRTOS

Protocol

TCP/HTTPS/MQTTS/TLS1.2

Power Input

1A @5V DC, micro-USB interface

Certification

CE, FCC and IC certified

Size

66.75 x 65.75 x 23.5mm

BLE RF Performance

Radio Operating Frequencies

2402MHz ~ 2480MHz

Radio On-air Data Rate

1Mbps, 2Mbps

Transmit Power

10+/-2dBm

Antenna

Onboard PCB Antenna

Range

Up to 200 meters (open space)

WiFi Performance

Wireless Standard

IEEE 802.11b/g/n (single stream)

Radio Operating Frequencies

2412MHz ~ 2484MHz

Radio On-air Data Rate

IEEE 802.11b, 1 –11Mbps

IEEE 802.11g, 6 –54Mbps

IEEE 802.11n (2.4GHz), 72.2Mbps

Transmit Power

17+/-2dBm

Antenna

Onboard PCB antenna

Security

WPA/WPA2

Encryption

WEP/TKIP/AES

Power LED

BT LED

WiFi LED

Regular Operation

Power On

Off

BT Signal Transmission

Flashing

Off

WiFi Signal Transmission

Off

Flashing

AP Mode Operation

AP Mode, Not Connected

Flashing

Off

Flashing

AP Mode, Connected

Flashing

Off

WiFi Configuration Success

Off

Flashing

Power LED

BT LED

WiFi LED

USB Power Input

AP Mode Button

Figure 2:

SGW6008 BLE-WiFi Gateway

Table 1:

SGW6008 LED Status Indicators

USGC1.01-V1.2 SGW6008 BLE-WiFi Gateway User Manual

SG Wireless™ Confidential 3

3. Provisioning Procedures

The following tools are required for the provisioning process:

•Micro-USB cable and power source

•PC or mobile device

•Stable WiFi network

•SGW6008 BLE-WiFi Gateway

a. AP Mode Configuration

1. Put the SGW6008 Gateway in AP Mode by connecting it to the power source with the micro-USB

cable.

2. Use the PC or mobile device to connect to the Gateway’s WiFi network:

Network Name: (available after Gateway purchase)

Password: (available after Gateway purchase)

3. After joining the network, use a web browser to access the SGW Gateway Configuration Platform at

http://192.168.4.1 (Figure 1).

Figure 1:

SGW Gateway Provisioning Platform

USGC1.01-V1.2 SGW6008 BLE-WiFi Gateway User Manual

SG Wireless™ Confidential 4

b. WiFi Network Configuration for SGW IoT Platform

There are two ways to configure the WiFi network for the Gateway:

1. Input your preferred WiFi network manually (Figure 2). Enter the network name and password (if ap-

plicable), and click ‘Save WiFi Setting’ when done.

2. Scan for available WiFi networks. Click ‘Scan’for a list of available networks and enter the password

(if applicable) for your selected network. Click the ‘+’ symbol and click ‘OK’ to verify and confirm the

network in the pop-up windows (Figure 3).

Note:

The Gateway is designed to support 2.4GHz-capable WiFi networks due to the low data rate

requirements for M2M. Up to a maximum of 32 characters in the WiFi password can be supported

(excluding special characters +, “ and \).

Note:

If needed, WiFi settings can be further configured once the network has been added to the WiFi

list. Be sure to click ‘Save WiFi Setting’ when done.

•If static IP is preferred, select ‘No’ for DHCP and enter the network’s IP address, Subnet Mask

and DNS.

•Use High Priority Slot to set the connection priority of saved networks.

•Remove WiFi networks from the list by deleting the network information.

Figure 3:

WiFi Connection

Figure 2:

Static IP and High Priority Slot

USGC1.01-V1.2 SGW6008 BLE-WiFi Gateway User Manual

SG Wireless™ Confidential 5

c. Gateway Provisioning

The Gateway has to be linked to a SGW IoT Platform account for data access.

1. Enter your SGW IoT Platform username (email address) and password, and label your Gateway with a

name, location and description (Figure 4).

2. Click ‘Start Provisioning’, then click ‘OK’ to confirm Gateway provisioning in the pop-up window. The

Gateway will self-reboot, and your PC or mobile device will reconnect to its original internet network.

You will be directed to the SGW IoT Platform when provisioning is complete.

3. Login to the Platform with your username (email address) and password, and click ‘Gateways’in the

navigation bar on the left. The provisioned Gateway will appear in blue (Figure 5).

Note:

Should the LEDs remain in AP mode operation after rebooting, please disconnect the Gateway

from its power source completely and redo the provisioning procedures.

Note:

Should you wish to configure a different WiFi network for the Gateway after provisioning is com-

plete, first disconnect the Gateway from its power source, then put the Gateway back in AP Mode

by holding down the AP Mode button while reconnecting it to power. Redo the procedures in

section 3a ‘AP Mode Configuration’.

Figure 4:

Gateway Provisioning

Figure 5:

Provisioned Gateways

USGC1.01-V1.2 SGW6008 BLE-WiFi Gateway User Manual

SG Wireless™ Confidential 6

4. Edge Device Provisioning

The edge device needs to undergo a provisioning process to connect to the SGW6008 Gateway.

1. If you are not already logged in, use a browser to access the SGW IoT Platform at https://www.sg-iot.com.

2. Click ‘Gateway’ to show all provisioned Gateways (Figure 5). Select the Gateway to which you intend to

connect the edge device.

3. Ensure that the edge device is turned on, then click ‘SEARCH NEW BLE’ to scan for all nearby edge de-

vices. Discovered devices will appear as green icons with their network names matching the labels on the

device (Figure 6).

4. Click the device to which you intend to connect the Gateway and label it with a name, location and de-

scription.

5. Click ‘SUBMIT’ to connect the device. It will now appear in the list of connected BLE Devices.

6. The edge device will start collecting data. Click the device to access the data.

Figure 6:

Edge Device Connection

USGC1.01-V1.2 SGW6008 BLE-WiFi Gateway User Manual

SG Wireless™ Confidential 7

5. Certification

a. CE Statement

Regulatory Conformance (RED)

Hereby, (SG Wireless Limited) declares that the radio equipment type (SGW6008) is in compliance with Di-

rective 2014/53/EU.

The full text of the EU declaration of conformity is available at the following website:

https://www.sgwireless.com.

b. FCC Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1)

this device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifi-

cations to this equipment. Such modifications could void the user’s authority to operate the equipment

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pur-

suant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates uses and can radiate radio frequency en-

ergy and, if not installed and used in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a particular instal-

lation. If this equipment does cause harmful interference to radio or television reception, which can be de-

termined by turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

oReorient or relocate the receiving antenna.

oIncrease the separation between the equipment and receiver.

oConnect the equipment into an outlet on a circuit different from that to which the receiver is connected.

oConsult the dealer or an experienced radio/TV technician for help.

oThis device and its antenna(s) must not be co-located or operating in conjunction with any other antenna

or transmitter.

c. IC Statement

This device complies with RSS-247 of Industry Canada. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de

licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouil-

lage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est

susceptible d'en compromettre le fonctionnement.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

USGC1.01-V1.2 SGW6008 BLE-WiFi Gateway User Manual

SG Wireless™ Confidential 8

d. RF Exposure Information and Statement

This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with minimum distance of 20 cm between the radiator and

your body. This transmitter must not be co-located or operating in conjunction with any other antenna or

transmitter.

Altri manuali per SGW6008

Indice

Altri manuali SG Wireless Portale

SG Wireless

SG Wireless SGW6008 Manuale utente

Manuali Portale popolari di altre marche

LST

LST M500RFE-AS Manuale utente

Kinnex

Kinnex Media Gateway Manuale utente

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuale utente

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuale utente

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manuale utente

Telsey

Telsey CPVA 500 - SIP Manuale utente

RTA

RTA 460A-NNA4 Scheda tecnica

Shaw

Shaw Gateway HDPVR Manuale utente

ABB

ABB VSN900 Guida rapida

Commander

Commander Pulse Manuale utente

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuale utente

NETGEAR

NETGEAR C6300BD Manuale utente

Amit

Amit CDW531AM Manuale utente

HMS

HMS Netbiter EasyConnect EC150 Manuale utente

Huawei

Huawei EchoLife HG620 Manuale utente

AT&T

AT&T U-verse 3801 Manuale per l'uso e la cura

Logic IO

Logic IO RTCU MX2 turbo Manuale utente

Suttle

Suttle MediaMAX MXM-521 Manuale utente